In just three days, the problem on the side of Guiqian City was solved, and it was so smooth that even Li Yifan didn't expect it.

Originally, he was still thinking about how to get this Sharp factory, but he thought that the equipment he fancied was not a fart at all in the eyes of the Japanese.

But in retrospect, it's a coincidence, after all, the Japanese are just treating LCD and LED devices as garbage these days, and they are still selling their plasma TVs all over the world.

Therefore, in the field of LCD screens, these two jishu devices are not valued at all, which can be seen from the speed of factory construction in Kamezen City.

On the one hand, it is not taken seriously, and on the other hand, it is also because the Japanese Jishu reserves are really strong enough, and they don't take these things seriously at all, so this time it was a coincidence, and if you want to have a next time, I'm afraid it's not so easy.

This time's action was really too smooth, so smooth that even he didn't dare to imagine it, this trick was also played beautifully.

According to Sharp's lack of attention to the factory, it is estimated that even if the site reopens next year, they will not necessarily know that their equipment has been stolen.

I found that there is a problem here, I'm afraid it will have to wait until their factory is completed and the production line is installed for trial installation, right? Haha, by that time, I'm afraid it will be more than half a year later.

Li Yifan's guess was not wrong at all, in fact, the Japanese did wait until September this year, when the factory was about to be completed, and when they were ready to install and debug the production line, they found that their equipment had been stolen.

And when they want to track it down. But I didn't even find a fart. After all, nine months have passed. All the clues are gone.

As for the old Yichuan, he resigned in March this year, and it is said that when he traveled to a certain place in Thailand, he won a local lottery and won hundreds of millions of yen, so he simply stayed there to retire......

Of course, these are all later words, and now Li Yifan's most important thing is to rush back to Tokyo, and things are going smoothly on Kamemae's side. These machines and equipment will go around in circles above the Pacific Ocean, and then go through Southeast Asia, Zuihou will go all the way north along the Yellow Sea, directly to Bencheng......

Unlike those sensitive equipment such as machine tools, these equipment are not advanced to that level, in fact, for him, the most important thing is about the manufacturing equipment of the TN screen.

This thing is a background panel for the LCD screen. It's the most basic entry, but even so. We can't produce it domestically.

Don't talk about this thing,Even if it's the picture tube of the big back TV that is still in use now,Some of the key components in it,We still have to import it from Japan,This shows the gap between us and other people's jishu。

With this production line, it will undoubtedly make our jishu and production capacity go to a big step.

When the time comes, if you can drum up this LCD screen factory, then just relying on this LCD screen factory, in the next few years of computer popularization, it will be enough to be happy.

The production capacity of four million is a small character for the Japanese, after all, they are facing the shijie market, but for a rookie who has just planned to go around the electronics market, this is already a large factory.

The most important thing is that after you have to eat these jishu and equipment, you will be able to copy this production line at that time, as long as the production capacity comes up, in the mainland market, you can completely rely on the cost advantage to defeat Samsung and Baodao's LCD panel enterprises.

To embark on the journey of the electronics industry, we must start from this point......

But here in Tokyo, there is something else waiting for you.

Originally, when he came to Japan, Li Yifan only considered two aspects, one was to get those evidence through Ishikawa Akiho, and then get the Mitsui chaebol, so that the other party agreed that he could finance Rio Tinto.

The second aspect is to go to Tatsuya Endo and Isamu Nobuta, and get some of Japan's leading jishu from them, so as to determine the advantages of entering the machinery manufacturing industry after returning to China.

But how did I think that after getting the information,But there is trouble with this manufacturing equipment,A few days ago, Endo Tatsuto handed over to those jishu materials,There are jishu related to the production of high-end CCD and CMOS lenses.,Unfortunately, this jishu is really good.,But we're just having jishu now.,But we can't produce it.。

After all, the electronic chips required for this photoelectric conversion are still very specialized, and we can't do it ourselves, and the Japanese are indeed masters in this field.

Since we can't do it ourselves, we have to work the Japanese, Li Yifan simply didn't do anything, and simply hit the idea on Nikon.

You must know that there are now one of the few companies on shijie that can compete with ASML of the Dutch-German joint enterprise, that is, Nikon, although Canon can also produce lithography machines, but there is still a big gap between them and Nikon.

Nikon's attainments in optics are well known to the world, and their cameras have been bought all over the world, and everyone knows that their cameras are good, but they don't know that Nikon's lithography machines are even better.

A camera, if it dies, it will be considered a high-end product if it is bought for a few hundred dollars, but a lithography machine, this is a transaction of at least 30 million yuan.

Even Intel in the United States is using Nikon's lithography machine to produce chips, which shows Nikon's uniqueness in this field.

Originally, Li Yifan didn't think of entering the field of lithography machines, but after having the CCD and CMOS provided by Tatsuto Endo, he was a little itchy.

The domestic lithography machine started very late, that is, this year, led by the National Development and Finance Commission, organized several domestic enterprises, and established Puhai Microelectronics Company in Puhai, which began to initially set foot in the field of lithography machine manufacturing.

However, the gap between us and Japan and Germany is obvious, and under such a concentration of national resources and policies, we did not produce the first complete lithography machine until 2010.

Like the domestic equipment advertised in China in the past, many key components of this lithography machine are imported, and this lithography machine is also two to three generations behind the international level.

But no matter what, we were able to produce lithography machines, although the level was much worse than others.

And this time, Li Yifan plans to get a few lithography machines from Nikon to go back, so that he can study and research, not to be able to copy other people's products, but at least to understand other people's designs and working principles.

It is obviously unrealistic to become a fat man in one bite, but at least with these things of the Japanese as a foundation, you can speed up your entry into the field of microelectronics.

In this regard, Li Yifan has set a ten-year ceiling for himself, think about how TSMC developed back then?

Isn't it just this kind of research and second-hand equipment provided by the Japanese to make a fortune? And this time I want to follow the same path as them, but my own road is more bumpy than theirs.

They can still get the support of the Japanese jishu, and on their own side, they have to rely on themselves!

Thinking of this Nikon, Li Yifan has a headache, Nikon is different from Sharp, Sharp belongs to the Sanhe Foundation, although the Sanhe Foundation is not small in Japan, but compared with the Mitsubishi behind Nikon, it is not a single one at all.

You must know that Mitsubishi has been around since the Meiji Restoration, and as the oldest consortium in Japan, Mitsubishi is definitely one of the eight largest consortiums in Japan.

Moreover, Nikon's corporate headquarters is located in Tokyo, and it is not so easy to get them.

It is not so easy to collect information about Nikon, the Japanese are not stupid, since the beginning of the Shijie process, they have moved many factories to foreign countries, and there is a production base in Nikon, Thailand.

However, where is only the production of some low-end digital products, and their main high-end products are still produced in China.

In Japan, Nikon and Sharp also have many factories, but they are more wealthy than Sharp, they have factories in Shinjuku District, Tokyo, and they must know that there are factories in the city, which is enough to show Nikon's confidence.

Nikon has confidence, but this is not a good thing for Li Yifan and them, after all, the urban area is densely populated and crowded, which is different from places like Kamezen City.

It would be even more difficult to get something out of this place, after all, the Japanese themselves value Nikon very much.

The most important thing is that he has been infiltrating Nikon for several days, but he still can't figure out whether this lithography machine is now in the factories they set up in Japan.

Nikon is not a small company, and there are many factories in Japan, but a lot of information about these factories is not public, which makes it very difficult for Li Yifan and them to gather intelligence.

Now, on the one hand, he asked Li Annie to send some people who are proficient in Japanese to quietly inquire about Nikon in Japan, and on the other hand, he is also quietly collecting materials about Nikon through Isamu Nobuta and Tatsushi Endo, after all, the National Institute of Materials where the two of them are located, but they also have a close relationship with Nikon, and they used to have a cooperative relationship, and now it is the same, so it should be more convenient to collect some information about Nikon through the two of them!

Li Yifan had already entrusted them last time, and I believe that after the hard work of the past few days, they should have a reply there. (To be continued......)