The main reason for the relief was that, as he expected, even after careful debugging by him and his team of engineers, this Chinese-made machine still didn't work.

The main reason for sighing was that he couldn't help but feel a little sorry for his Chinese counterpart.

Look at the conditions of his Chinese counterpart, in order to make a living, he can't even eat enough, not to mention the allocation of some scientific research funds, he built such a machine in such a simple environment where he can almost leak air everywhere.

Although this machine is simple, it can even be said to be ugly, but it is such a machine, but it can complete the simplest 3D printing work, for which he can not help but express his admiration for his Chinese counterpart.

You must know that the working environment in which he and his peers are in and the working environment of their counterparts in this country can be said to be worlds apart, ten times better than here, or even dozens of times better, and they have sufficient scientific research funds, and they never have to worry about not having enough to eat and so on.

However, it took him and his colleagues several years to come up with a thing similar to this machine, although in appearance, it is much more beautiful than this machine, but if you go back to the basics and talk about the simplest functions and principles, they are all about the same.

And what people spend is only a few percent of the scientific research funds they use, or even less than the funds, to make such a machine, and the threshold of 3D printing technology that has been touched, which can't help but make him sigh, the other party's mind and talent.

It's really a big country! If they had as much research funding as we have, and had the same environment as ours. Will we still have food?

When I think of this. Koike Kazumine couldn't help but shudder. It's good that the other party ......

So let them go on like this! Koike didn't plan to remind his peers how they could do better.

A simple experiment with a strong scientific research atmosphere ended in such a situation when both sides had their own ghosts.

In the evening, Xiaochi Yifeng also specially invited Hu Bin and his assistant Yao Chongshan to go out to the best hotel in Hanzhong for a meal, expressing their gratitude for this time.

And by the way, I also sent an invitation to these two unkempt and well-faced colleagues, if they were willing to work in Japan. He is absolutely willing to vouch for them, and will invite them to the company, and will definitely provide them with the best scientific research conditions and equipped with the best helpers.

Because before going back at night, Koike Yifeng thought a lot, although this machine was rudimentary, and today's experiment ended in failure, but this did not negate the scientific research ability of these two people.

Empathy, if it were him, under such scientific research conditions. He pondered for a long time on his own, and he would never be able to do this to them. To be able to complete such a work is to explore the entry threshold of 3D printing technology.

So although today's experiment can be said to be a failure, and the machine developed by these two people also feels very failed, Koike Kazumine still admires these two people very much.

Being able to adhere to their ideals in such an environment and with such insufficient funds to engage in scientific research and produce results is worthy of admiration and respect no matter where they go.

When Hu Bin and Yao Chongshan, who were opposite, heard Xiao Chi Yifeng's invitation, they both showed surprise on their faces, and even showed ecstatic expressions, but in the end, they still used their families as an excuse to say that they would think about it when they went back.

In the end, Koike Yifeng is still very sorry that he couldn't poach these two talents directly, but it's a good thing that they can go back and think about it, after all, many people can't help but consider the impact on their families, hoping that they can quickly change their minds and then throw themselves into the arms of our Great Japanese Empire.

Koike Yifeng personally sent the two people out of the hotel with a little emotion, and then sent them into the taxi, and what he didn't expect was that when the two got into the taxi and looked back at him, their expressions were so complicated.

"Brother Hu, what is this? Maybe this should be the legend, sold by someone, and still helping others count money, right? For the first time, I thought, maybe the Japanese are not as bad as we thought. ”

"No, you should say, the Japanese may not be as smart as we think, hahahaha......"

"Hahahaha......"

The car instantly erupted into a burst of violent laughter, and this loud laughter floated far away with the taxi, far away......

The embarrassed looks of the master and apprentice, as well as their satisfaction with their acting skills, made them spread this topic for a long time, a long time, and when Li Yifan learned about such a situation, he couldn't help but be made to cry and laugh by their funny.

He didn't expect that these two guys not only cheated a check for one million from the Japanese, but also used some bad technology to deceive the Japanese, and the most important thing is that they also got what they wanted most from the Japanese.

The taxi did not send the two of them home directly, but went directly back to the warehouse where they did the laboratory in the afternoon, and when they entered the warehouse, Hu Bin immediately pulled out a few cameras from a few hidden corners, and then touched out a few storage devices.

Finally, they connected these devices to the newly configured computers that Li Yifan gave them, and then used the playback software to start playing.

The master and apprentice were watching and shouting at the same time.

"Tut-tut, look at people's techniques, the screws at the bottom, they actually have a special rubber pad, pad underneath, and then tighten, and then in the rebate two laps, these are real assembly skills, I didn't think about these before, sure enough, after installing this thing, our machine, when running, I don't want to think about it at all......"

"That's it, master, did you see what people were doing when they assembled this bolt? Tut-tut, look, people specially smeared a layer of oil on the bolt, oops, what kind of oil is this? They specially configured it, I think it's the mustache, carefully taken out of his bag, it's just a small bottle, touched it, and quickly put it back! ”

"Yes! Take a look at other people's techniques, as well as this process, we don't admire it, I used to think that such a machine, as long as he is installed, and then tighten the screws, now it seems that it is not the same thing at all! After what people do in Japan, the reason why they can achieve such stability and such precision is that it is not boasted, and the ability of this assembly is indeed extraordinary! Let's try that machine ......."

The two hurriedly turned to the front of the machine again, but this time Hu Bin changed a few nozzles for the machine, and then reset the working program on the computer, and then the machine immediately began to work.

But this time when the machine works, it is completely different from his original time, when the machine moves, it always makes some creaking sounds, and sometimes if the axis is rotated down in a day, let alone eight hours of work, it is five or six hours of work, then they have to take a break, and by the way, they have to check the equipment.

But now this machine, when it is working, it can be said that it feels brand new, there is no movement at all, even if there is some noise, it is very slight, and the noise generated by the previous work is not the same at all.

And this machine, which worked for more than three hours in a row, did not even reflect the old problems as before.

It turns out that their machine, if it works all the time, can work for five to six hours, but generally after three hours, there will be problems such as shaking, increased noise, and low accuracy and stability.

But today's machine, after the assembly and debugging of these Japanese, immediately became different, and it worked for more than three hours in a row, and none of the old problems appeared before.

At this time, the two masters and apprentices were completely impressed by the craftsmanship of these little Japanese.

"Indeed, it is not possible to disobey, I used to design a machine, I just thought that as long as the machine was designed, and then the workers were assembled together according to the assembly process, the screws were tightened, and it was done, as long as everyone used the machine in accordance with the operating rules, it was OK, no problem, and now I know that it is not the case. A machine should not only be designed, but also pay attention to assembly to Ha! This well-assembled machine, and the poorly assembled machine, is far from so bad! ”

Hu Bin looked at the machine in front of him and sighed.

"Yes! In the past, it was said that the quality of Japanese cars was good, and after many people figured out the doorway, they also said that it was actually because of the good assembly process and high means. But we don't know exactly what the process is or what the means are, and the Japanese won't tell you at all. After pressing the means of these Japanese today, I realized that there is a sky outside the sky, and there are people outside the people, so it turned out to be as simple as ordering a rubber pad or smearing a little lubricating oil on the bolts, but why is it such a simple thing, but we can't think of it? ”

The master and apprentice couldn't help but be impressed by the ability of the Japanese, and as soon as they turned their heads, they began to look at the records taken secretly today. (To be continued......)