"Two columns, on the workpiece, let's process a sample first, material, 45 steel, cutting speed 100, back eating knife amount 0.1, comprehensive turning, step, cone, chamfer, convex, easy program input, now ready to start!" Qin Zhenhua was full of confidence, and he immediately wanted to produce a set of comprehensive samples to directly test all the results.

The workpiece was put into the fixture, and then, the two doors outside were closed, Qin Zhenhua also patted it gently, and hummed in his mouth: "Air-conditioned room, cleanliness?" Hehe, do you really think we don't understand? ”

After the German got out of the car, he said something outside, Qin Zhenhua actually heard it, and he was annoyed for a while, and these things that happened in a row later were also related to those words, since they were not kind, then he woke them up.

If there is such a factory, of course, it is the best, but if the conditions are not available, there is no need to be so deliberately forced.

It's like a computer room, where it is said to be clean, and you have to wear shoe covers when you enter, but in fact, later, every household has a computer, and the dust in it can accumulate even a few millimeters thick, and it still works.

Not so squeamish.

This lathe, when processing the workpiece, the inside is closed, there is no need to worry about any dust coming in will affect the machining accuracy, that is pure... Fart and take off your pants!

Returning to the control interface, Qin Zhenhua pressed the button, and the inside rotated, and in the buzzing sound, everyone's eyes were attracted by the lathe.

CNC lathe, no need to manually control, as long as the instructions are entered, you can operate according to your own wishes, greatly saving physical strength, this is science!

Qin Zhenhua used to tinker with the dilapidated CNC machine tool, it took a lot of effort, now, the control mechanism of this CNC machine tool is quite dexterous, especially the electronic part, that is, the size of a box, but it is easy to operate, many programs are built-in, this kind of cutting, press the button, the program is integrated, quite convenient.

Detrich gritted his teeth, stepped forward and picked up the vernier caliper, and waited for a while to finish processing, he wanted to check the accuracy in person, this was his last hope, the accuracy of the other party's adjustment was not enough!

The other party must be the first contact, because it is completely in accordance with the instructions, if you do more, skilled, then you don't need the manual, it is already ripe, this is not only the other party's cautious problem, is the reason for the first operation, besides, so cautious, it means that it is the first time to novice.

However, novices don't have such sophistication.

When the machine stopped, Detrich strode up and wanted to measure it by hand, Qin Zhenhua's voice sounded from behind: "Hey, if you measure like this, taking the expansion rate into account, there will be an error of 0.01 mm." ”

Hot expansion and cold contraction, I can't wait, it's a matter of a few minutes.

Qin Zhenhua laughed secretly there, this guy must be in a hurry.

"Brother Zhenhua, let's make it, no problem, right?" Wang Erzhu asked in a whisper on the side, but at this time, Zhao Guodong came up and patted the shoulders of the two: "I believe in Zhenhua, there must be no problem!" This time, Zhenhua is going to be famous again. ”

"Impossible, impossible." By this time, De Trich was already measuring, and as he was doing so, he said with incredulity: "The concentricity is so high, it's the highest level." ”

"The roundness is good, and it's of the highest standard in every way."

"The depth of this groove is completely up to standard, and with this vernier caliper, the error can no longer be measured."

The other party muttered while measuring, and after measuring all the data, he put down the vernier caliper and sighed.

"Well, you win." De Trich said: "The CNC machine you installed and debugged is fully qualified, but even so, I have to tell you that this DMG-60 machine tool, future training, warranty, etc., has nothing to do with our German company." ”

This was already Detrich's last warning.

The worker in front of him perfectly unboxed, installed, and debugged this CNC machine tool, which means that their original ideas are bankrupt, and they will not be able to make money through installation and debugging in the future, and they will not be able to make money in the later training and the like.

This is a lot of money in their plan, and as soon as this head is opened, they can only follow this process if they want to import CNC machine tools in the future, and they will always make money in the future.

But now, with the success of the other side, that hope has gone bankrupt.

If it was an ordinary person, it would be time to retreat, but De Trich didn't, his idea was very long-term, he had already thought of other things, this kind of machine tool in the eastern country, imported more than one, in addition to their factory, other factories also have, and such demonic technicians in front of him are estimated to be rare.

So, what about other factories, will it be the same, invite him over to install and debug? If that's the case, then they won't be able to make money.

So, to curb this trend, you have to be clear, even if you do it? Do other factories dare to risk losing their warranty qualifications to ask you to install them?

Even if there is no problem with your installation and commissioning, we will not admit it, and we will not give you a warranty in the future, this is our attitude.

"That's your business, anyway, this machine is already working, and for us, that's the most important thing." After Qin Zhenhua finished speaking, he looked at Ma Panshan and said: "Director Ma, the installation and commissioning are complete, this international friend has already said that it is completely up to standard, I am hungry, I will go to eat, and in the afternoon, install that one." ”

After speaking, Qin Zhenhua pointed to the big box next to him.

CNC machine tools, is divided into many kinds, although now in foreign countries there are automatic tool change, a machining center to complete a variety of processing processes, but this device in the West is also the most advanced thing, it is impossible to export to the East countries.

Now imported, are ordinary CNC machine tools, so, it needs to be divided into several kinds of operation, such as CNC milling machine, CNC lathe, CNC drilling machine, CNC grinding machine and CNC gear processing machine tools, etc., now, just install and debug only the first one.

Once these equipment are installed and commissioned, all kinds of designs since this period of time can be produced from these advanced CNC machine tools, and the machining accuracy will be improved by a grade.

Ma Panshan's brows furrowed again.