Chapter 1060: Formal Manufacture of Nuclear Weapons

Three and a half days later.

The tin wood was housed in the urgently restored Research Room 3, secured in a large glass container.

The container was filled with nutrient solution, and the tin wood floated quietly on the surface of the liquid, rising and falling, growing slowly.

Compared with the previous one, this time the tin wood returned from the state of the tree to the state of the tree, which is slightly different, and the process is slower and more cumbersome.

Ximu's explanation for this was that because he had been hit twice in a row, his core origin power had been seriously affected, in other words, it was very likely that he would not be able to maintain the level of an advanced life like the Immortal Species.

In order to prevent this from happening, he needed to take some time to consolidate the Core Origin before regrowing. In this way, he can make his trunk harder, absorb more energy from the void, and have a greater ability to stabilize energy fluctuations.

To sum up, it is because he was beaten too badly before, and he was "wiped out" twice. This time he learned his lesson and was ready to make a wave of lewd development before doing something else.

As for the purpose of his lewd development, whether it was for a better job or another purpose, it is difficult to determine.

In this regard, Richard didn't bother to guess whether it was true or false, but told Ximu very seriously: There is only one chance for forgiveness, and it has been used up not long ago. So, either concentrate on your work and try to "reduce your sentence" so that you can be free as soon as possible. Either continue to harbor dissenting intentions, and once discovered, then directly and completely destroyed.

After warning Ximu like this, Richard took care of all the finishing chores, and it was rare to have a free time.

He gave himself a half-day off to adjust his physical condition and mental state to the best, and then began the final step of the nuclear weapons research and manufacturing plan - the manufacture of nuclear weapons.

......

Nuclear weapons building, begin!

Four days later, in the early morning, at six o'clock sharp.

"Click, click, click!"

Richard was in front of the lighting system console in the main laboratory, operated a few times, and reached out to press the button. Through the glass window, you can see that the lighting lamps placed on all sides of the Garden of Eden outside are instantly lit up, illuminating the entire Garden of Eden with soft light, as if the sun is rising, representing the beginning of a new day.

Richard looked at it, nodded with satisfaction, and walked out of the main laboratory and towards the machining sector.

......

Machining sector, Laboratory 1.

Richard pushed the door open and walked in, and saw that on the floor of this room, there was an extra silver-white metal table than before.

It's a bit insulting to say it's a metal table, and the device in front of it looks more than a little bigger than an ordinary metal table. The "table top" alone is several square meters in size and extremely strong, and the sixteen "table legs" are thick and powerful, like the legs of an elephant, each of which is enough to withstand the gravity of several tons without deformation, and only in this way can it house all kinds of machine tools, equipment, etc., necessary for the manufacture of nuclear weapons.

In addition, each leg is inlaid with a spirit level – a glass sphere with a scale that contains half of the colored liquid, which is determined by the level of the liquid.

In addition, each table leg is also equipped with a screw jack to ensure that the height and angle of the table top can be adjusted freely.

Richard walked in and glanced at the level of nuclear weapons on the table leg, because it had been adjusted in advance, so at this time it was found that it was completely in line with the standard.

"Whew-"

With a light breath, Richard began to place all the equipment around the metal table for the rest of the fabrication.

......

A few hours later.

A large number of pieces of equipment were arranged around and above the platform, and Richard walked in from outside the room with a large piece of metal and placed it on the platform to begin cutting.

"Squeak Squeak ......"

The long robotic arm, under Richard's control, constantly makes noises and moves its position on the metal block. The spatial iron ring inlaid at the end is like an indestructible blade, cutting off the excess metal parts as quickly as cutting tofu, and storing these excess metal parts into the independent space, leaving no annoying garbage.

Thanks to Richard's skill, the cutting work progressed quickly, and in a few moments, an oval shell was built.

This is the shell of a future nuclear weapon, in other words, the shell of an atomic bomb.

It looks like the entire shell is almost a meter high, and if you measure it accurately, it is ninety-five centimeters, so that it can be easily carried around in the space iron ring.

The width of the shell, in comparison, is a little smaller, only about 60 centimeters.

Richard took out the measurement attack, measured accurately, and determined that it was sixty-two centimeters, which was in line with the design data on the drawing, and nodded his head, showing a satisfied expression, but he controlled his emotions and was not too excited.

The shell of a nuclear weapon is manufactured, which is the first and simplest process of nuclear weapons manufacturing. In a sense, he just warmed up with this process, and there is no big consequence if he fails, and success does not mean much victory.

The next process to be done is what matters.

Moreover, one is more important than the other.

"Click......

Richard stepped away from the counter, stepped aside, picked up the cup, drank the nutrient solution in one gulp, took a few deep breaths, turned and walked out.

......

A few hours later.

Richard appeared in another functional sector of Eden, busy in front of a furnace, and what he was doing was sintering rhenium-tungsten alloy.

Rhenium-tungsten alloy, as the name suggests, is a material made by a mixture of tungsten metal and rhenium metal. Among them, he had already obtained the required metal tungsten, and the rhenium metal, through the line of Rice City, also obtained a sufficient amount.

At this time, he mixed the powder of tungsten metal and rhenium metal into one piece according to strict proportions, then poured it into a mold and pushed it into a furnace to prepare for heating.

The furnace in front of you, unlike a normal furnace, does not rely on burning fuel to generate high temperatures. Instead, it has a built-in metal coil, which is heated by the principle of electromagnetic induction vortex heating after the current is turned on.

In a sense, it's a giant induction cooker.

As a result, the demand for electrical energy for a short period of time is high when the device is used. In normal times, he would have a slight headache and think about how to modify the energy system wiring of the Garden of Eden, so that the rest of the equipment in the use of the electromagnetic furnace would not be affected too much.

However, now in Pompey, there is no need to be so troublesome. Transmit the energy stolen from the belly of the volcano and use it directly.

"Click!"

With a soft sound, Richard pressed the button on the furnace, turned on the circuit, and the inside of the furnace brightened up, and began to heat the rhenium-tungsten alloy powder.

One second, two seconds, three seconds......

The temperature in the furnace rises rapidly, and after a while, the metal powder in the mold emits a harsh white light.

......