The engine is connected together with the fixed positions on the special car body through anchor bolts, and now, Qin Zhenhua has directly cut off the fixed positions of these anchor screws!

In the midst of the spark splashing and the piercing cutting sound, Saeed looked at the fixed position of the last anchor screw, which was also cut off, and showed an incomprehensible expression on his face, a little like a rabbit dead and a fox sad?

"You, you cut these off, in case our engine fails to be replaced, and then stuffed back into the original engine, it will not work." Said took a long time before he spat out such a sentence from his mouth.

He took the hand grinding wheel in, and thought that he would polish some special parts, the places where the solder joints were piled up before, etc., where did he think, he actually started directly at the anchor screws of the engine, and he knew that if this was the case, he would not let him do anything.

"If we don't cut this, we can't fit our engine, it's going to get stuck in our engine." Qin Zhenhua introduced: "Besides, do you plan to change back to the original engine?" What about switching back? Isn't it still the same resonance, and there is no way to solve it? ”

Qin Zhenhua asked the other party rhetorically, but Saied couldn't speak, that's right, even if it is put back, it can't be used, it's better to break the kettle like this?

However, there is always a strange feeling in my heart, which is indescribable, but I always feel that something is faintly wrong.

The car is put together through the frame, the front and rear through the frame of the longitudinal beam, is the most important, just like the Mercedes-Benz company, their truck performance is strong, using their unique variable section girder, and now the Scud missile launcher in front of you, naturally also has a girder.

If it is the main beam of the girder, it is not weldable, and the high-temperature welding will reduce the mechanical strength of the girder, after all, the girder is a special high-strength alloy, even if it is to be welded, it is also a special low-temperature welding method, most of the time, it is still riveted.

However, many times, a girder is not enough, and sometimes a secondary girder will be attached to the outside of the girder, or under the girder.

And now, this special Scud missile launcher uses this scheme, the engine bracket is welded to the auxiliary beam, and now it is cut off.

Then, a few people from a machine factory got under the car body, carefully measured the distance from the engine to the rear axle gearbox section with a box ruler, and then determined the position and reinstalled the new engine mounts.

This work was very busy, and everyone spent a whole day on the second day. At the same time, I also took a look at the entire chassis structure.

In fact, there is no need to cut off the original bracket at all, the big guys all know what Qin Zhenhua is doing, and no one is silent.

That's right, this Deutz V12 engine was originally not intended to replace the B2 series of tank engines, so when designing, the position of the anchor screws is different, but, in China, there are already a large number of Deutz engines to replace the previous tank engine scheme, the big guy does not need the original anchor screws at all, directly has a special additional bracket, put it in the original position, it can be perfectly replaced.

Therefore, now everyone pretends to measure the distance, in fact, it is useless, as long as it is relative to the original bracket position, it is enough to deviate from a certain distance.

However, pretending to put on a show just let the other party know that you have spent a lot of effort.

As for why they want to cut off the original one, it is obvious, that is, they want to let them open the bow without turning back, in case they don't want to change it tomorrow? What if the report goes up and the superiors have other opinions?

Now that it's like this, it's cut off directly, they don't want to beg for themselves, and it's impossible.

Said was there, with a rather strange expression on his face, like a little daughter-in-law who had been treated roughly, since they were all cut off, he had no other choice but to hope that these people would succeed.

The next day, the new bracket was welded, and Qin Zhenhua put the brand-new engine rubber pad on the bracket.

The engine is constantly vibrating, and this vibration cannot be transmitted directly to the car body, so this floor pad is needed.

When the engine vibrates too much, there may be many problems, such as the engine itself is running without cylinders, the engine balance flywheel is broken, etc., at this time, it may cost a lot of money.

Of course, there are also simple ones, for example, it may be that this mat is broken, this thing is made of rubber, and it has a certain lifespan.

If you meet a black-hearted repairman, you will never tell that this simple rubber pad is broken, but to disassemble the engine for overhaul, so that the cost of maintenance will go up with a whoosh.

In order to make money, they can do anything.

However, of course, Qin Zhenhua is not doing it to make money, he naturally has his own reasons for doing this, after all, he came to ask for help with an open mind, and wanted a Scud missile launcher, but he refused here, and just asked himself to help repair it.

The big guy doesn't need to pay for repairs, just to see more of the structure of these two missile launchers.

Moreover, they also put on an engine, the life of this engine, that is quite long, after replacing this engine for them, they no longer have to worry about hundreds of hours to change the engine, they can be sincere to help them, now, just to make their determination more thorough.

Only change the foot pads, they are not stupid, they will definitely be able to react, other Scud missile launchers, also concocted in the same way, it is none of their own business, now, change the entire engine, in this process, there is a new bracket, naturally there must be a new rubber pad, this is not obvious, the other party will never think of it, the problem is in this aspect.

As for why the other party didn't put the fault on the rubber pad, this can only be blamed on their accessories are not in place, anything, can be in stock, only this kind of rubber pad can not be stocked.

Rubber products have a shelf life, and no matter how they are properly stored, they will harden and break after a few years.

In World War II, the Germans suffered from the lack of rubber, why didn't they stock up more before the war? Because it's useless, it's reserved, it's not needed, and it will have to be wasted when the time comes.

A small rubber pad has become the reason why they can't eliminate the fault after repeated repairs, and now, I have generously updated them, which can be regarded as helping them solve the problem.

By the end of the evening, the new engine had finally arrived.