Some of the voices of dissenting voices are opposed! Will the widespread giving of the back now cause the dispersion of weapons? In particular, the equipping of indigenous cadres with pistols was the most controversial: the army was centrally managed, tightly controlled from top to bottom by the Crossing Crowd.

The possibility of dispersed weapons is minimized, and once in the hands of extremely dispersed indigenous cadres, weapons are difficult to manage.

However, the real threat led to the proposal to create a pistol for the use of indigenous people as a standard self-defense weapon.

So the question was given to the first weapon design group, the first team specialized in the design of "modern weapons", and the second design group, which was mainly based on retro streams, was different.

The main combat force of the first weapon group is Li Yilao.

This one who rarely speaks on weekdays.

The man with a round body is a good hand in machining, not only can he be a fitter, but he is also very skilled in other machine tool applications.

This craft contributed to Li Yilao's side business.

He used to secretly make illegal guns.

Replicating a small pistol with a free bolt like the Plex was a piece of cake for him, and according to him, he had made pistols, shotguns and rifles.

To show that he was not bragging, he brought two pieces of his own in his carry-on luggage, a Karloff, a concave and ... Rigid.

Li Yilao donated a complete set of his gun-making tools and a lot of special equipment he had saved to the organization.

There you have this set.

As long as you can find roughly suitable steel, it is not too difficult to build support, and of course it cannot be compared with what comes out of regular factories.

The only problem is that bullets are hard to make, and he is very modest to say that he will only reload.

Li Yilao initially did this business not so much to make money, but as a hobby, a person who loves weapons and has the ability to do things.

But once his interest was supported by profits, his study of jishu became more and more energetic.

The things that were made became more and more daring, from simple imitations of small smashing guns to decent imitations of all kinds of famous pistols.

If there were no bugs, Li Yilao's fate could be imagined.

His wife Li Yuanyuan said: Most of them are forced to participate in the crossing.

The two of them had a very happy time in Lingao, his wife worked as a clerk in the executive committee, and he could finally make guns in the open, and he could make guns in the sun and discuss his works with people in a big way, this kind of happiness was something that Li Yilao had never enjoyed in the past.

But Li didn't find much opportunity to play.

The Traveler's arsenal is quite full, with rifles, pistols, and shotguns, and his homemade firearms are not needed for the time being.

People praised his craftsmanship, but no one wanted to use guns made of substandard local steel.

As for the Mini rifle made for the natives, it was the product of industrial mass production, and he didn't need to make any effort to show Wu Yan and others to prepare a full set of tooling equipment needed to produce Mini rifles in another time and space.

So Li Yilao took up his post at the Machinery Factory) was responsible for the manufacture of ammunition for small arms, mainly for rifle 7 hearts and 5 reloading bullets, which were consumed in large quantities in several battles.

In the past, Li Yilao often reloaded this kind of bullet, and he was very familiar with and specially engaged in a set of small special equipment, including a warhead mold and a special press.

He couldn't make a bullet by a bullet, but fortunately, there was a lot of lead here, so he directly used pure lead to make gunpowder, gunpowder is the most high-grade fine-grained black powder, no matter how hard the chemical department tried, nitrocellulose always stayed at the level of making paint.

But the current situation is not the same as in the past, when it was reloaded with a few, a dozen or at most a hundred.

Even the daily shooting and scraping exercises carried out by the traversers on weekdays in order to maintain the feel of the weapon were at least 2,000 or more bullet casings after the end.

These shells had to be reloaded by him one by one, which was simply hard labor.

With the support of Zhan Wuya, Li Yilao improved the equipment, and put the small equipment that was originally suitable for him to use secretly by himself into an assembly line that could be operated by multiple workers.

In this way, he will have the time and energy to engage in his own business of small arms manufacturing.

He was not involved in the manufacture of the Dehringer pistol, a rudimentary weapon that he did not look down on.

He focused his efforts on copying military slogan-caliber shotguns, which had low requirements for bullets.

No need for metal cartridge casings.

The Navy and special reconnaissance teams are interested in this weapon.

The task of replicating a pistol temporarily interrupted his work on the development of a shotgun.

The weapons design team gathered from their posts in the offices of the machine shop to prepare for this "indigenous special pistol."

Conduct project discussions.

The soul of the first weapon design team is Bai Yu, who is not only an armored officer, but also a dignified weapon design and engineering design.

Although Li Yilao has rich experience in making guns, he has very little experience in how to design weapons and make them suitable for mass production, and he has always been a handicraft workshop-style system: After receiving the assignment, several members of the design team pondered the weapon requirements issued by the Planning Institute: This kind of weapon must be cheap enough, consume less materials, be convenient to produce and manufacture, and can form a large-scale production capacity in a short time.

In terms of ammunition for pistols, it is best to find ammunition that cannot be copied or substituted by indigenous people, so as not to be used by hostile elements after the pistol is lost.

The pistol should be easy to use, safe and reliable, the performance does not have to be very high, and the effective range can be 10,000 meters......

To meet these requirements, only the revolver Li Yilao said after looking at it, "Even the barrel with ammunition is the same as the Mini rifle." ”

"Single-handed, forget it, hit one shot and pretend once, either for murder or suicide."

Bai Yu has always been disgusted by such a simple and ugly weapon.

The first group felt the same way.

Revolvers have low requirements for materials, use hammers to fire, and do not need springs and firing pins that are very demanding on materials and production jishu.

The ammunition feeding method is simple and reliable, and it can provide a certain amount of continuous firepower.

"Which one do we imitate? Webley or Smith 6 Wesson?.

Li Yilao knows most of the pistol line drawings and structural drawings on shijie, and if there are materials, they can basically imitate a ** without leaving ten, of course, the performance cannot be the same.

"If you want to say that the performance is better than the Webley revolver."

"It's still Smith 6 Wesson, Wang Ruixiang likes this pistol very much, although he has never seen a pistol in another time and space, even if it is a dog.

But he still fell in love with this rather romantic weapon.

Among the self-defense pistols purchased by the Traveler through the North American compartment are many of the "... Revolvers, mostly with inch-changing barrels.

Wang Ruixiang got one, and with the imitation of the American policeman's revolver holster and bullet belt he got from the military store, it hung on his ass all the time.

"Webley's revolver reloads quickly."

Li Yilao said.

The Webley revolver lowers the grip to reload by pushing forward the rear left lug pin of the revolver.

Then the sleeve seat and barrel were closed and ready for firing.

When the cartridge case is removed, the gun is turned on again, and a star-shaped shell retractor automatically clears the cartridge case from the runner.

This is a faster and more advanced device than swing-out runners and is more suitable for the use of quick loaders.

"I'm afraid that the material can't be done, Bai Yu said.

The structure of this gun is complex and the weight is on the high side, so the material strength requirements are high. ”

Besides, we don't have any metal shells available, and its advantages can't be reflected." ”

Wang Ruixiang insisted on it.

"I think it's still too complicated.

The instructions given to us by the Planning Institute for making guns were to simplify again and again. ”

Bai Yu said, "Eliminate all unnecessary parts, minimize the process and processing requirements", Smith 6 Wesson had to make a western version of the revolver if he wanted to simplify. ”

In the end, the decision was made to use the western version of the revolver, which could not be placed with a revolver, and had to manually turn the chamber.

Turn one round at a time.

The loading speed is slower, but the device of the runner swinging out is omitted, and the tolerance requirements for production assembly can be further reduced.

Originally, it was to further reduce the difficulty of production.

Unified production standards.

Wang Ruixiang proposed that the revolver use the same diameter seamless steel tube as the Mini rifle, so that they could use the same size seamless steel tube without separate material preparation.

It is even possible to use scrap from the cutting of the production of the Mini rifle.

However, Bai Yu believes that this improvement is not worth the cost: the adoption diameter is too large.

It will inevitably result in too much ammunition being loaded, resulting in excess power.

The revolver does not have any anti-recoil parts, as small as the reentry mechanism, so the recoil is entirely borne by the shooter himself, so it cannot fire ammunition with a large charge.

The result of too much recoil is that it is difficult for the shooter to master the gun when shooting, which affects accuracy.

Moreover, the unique structure of the revolver allows gunpowder gas to leak from the gaps in the revolver.

If the bullet is too large, it is necessary to have more gunpowder to be loaded, and too much gunpowder gas and incomplete combustion may injure the shooter.

When gunpowder is fired more, the more gas expands, and the requirements for the manufacturing materials and processing level of the barrel and chamber are also high.

If small-caliber ammunition is used, the barrel material requirements can be greatly reduced, as well as the structural and technological requirements.

One of the problems of Zuihou is that bullets, whether metal bullets or paper shell bullets, are too large in size and weight, and the size of the pistol will also increase, and in order to reduce the size, it is necessary to reduce the magazine capacity. ”

In my opinion, the current Ni rifles are too large in caliber and too powerful.

However, this is a fait accompli, and it will not be changed for a while. ”

(Visit H】