At this time, Hou Xianglin didn't pay attention to the situation around him, although he listened to the complaints of the onlookers, he just smiled faintly, he knew that this was an obvious fact, and he couldn't tell everyone that doing these jobs was not tiring at all, it must be tiring.

So he just buried his head in his own hands and read the introduction of the manuscript:

"Everyone, please listen to me and tell me, uh, this orbital kiln is half smaller than usual, only fifty meters in diameter, and in the old world, this kind of kiln was usually two hundred meters in diameter, so the production of red bricks per day is relatively small, but in the early days...... It should be enough for our needs to engage in construction, and these are relatively simple equipment with relatively simple technology, which is clear at a glance and is not difficult to master, and these are relatively general equipment, so it is not difficult to master.

I will now conclude that although the output of the annular track kiln is average, with a daily output of about 4,000 red bricks and about 2,000 tiles, it is indeed easier and more labor-saving than ordinary brick kilns.

In addition, there are three die-casting machines supporting equipment, which are electric, and the mold is complete, which means that we can make full use of all kinds of cement waste, slag and coal gangue to produce various hollow bricks, and of course, we can also produce cement bricks, which is much easier than the brick kiln, and the disadvantage is that the one-time output is not large and it is quite power-consuming.

Fortunately, the rail kiln has a complete set of independent power system, including three 85,000-watt Stirling external combustion generators and auxiliary electric motors, and the fuel of the external combustion engine is mainly pulverized coal, so it is also equipped with three small pulverized coal engines.

However, the rest of the operating system is still electric, and it needs to be given electricity.

In addition, these three pulverized coal machines are of great use to us, the wind blades are pressurized into the kiln for suspension combustion, and the thermal efficiency is greatly improved, whether it is used for cement calcination or rail kiln brick burning!

Here, I sincerely admire this design and supporting scheme, and give Anna 10,000 likes! And this equipment can make use of all kinds of raw coal on the island, including lignite and even stone coal......"

Then Cao Limei added next to her:

"There are a lot of low-grade coal resources on the island, and these coals have been crushed through a series of crushing processes to turn them into very fine powders, which can also be used as fuel, and if mixed with heavy oil, they can also be used as high-quality fuel for Nicole and Pride."

Hou Xianglin nodded and said:

"That's right, there is also these equipment not only I can use here, I believe that Mr. Zhao's coal and coke chemical industry also needs this kind of equipment, such as a little improvement, plus a few ready-made accessories to become a coal grinding powder sprayer...... Uh, it seems to be too professional, do you still want to hear it? ”

"Listen, speak."

The crowd replied expressionlessly.

"Well, in fact, the whole annular orbital power kiln system is a very good thing, and I have to give Anna a thumbs up again, so I strongly recommend here, it is best to give priority to copying this equipment in the future......"

"Brother Hou, we don't know why if you like it or not, but as long as you have the approval of Foreman Hou!"

Obviously, the onlookers were obviously a little interested in this, and someone in the crowd asked, do you have any other equipment for your building materials project?

"Yes, Anna also gave some asbestos tiles and other products, and Xiao Cao told me that according to the geological map that Anna gave us, there is low-grade alumina-containing clay at the eastern end of this archipelago, which can be used to make more advanced refractory materials. These asbestos products are probably the foundation for us to make refractory materials, right?

In terms of raw material production for the kilns, Anna gave us three jaw and three cone crushers for crushing stones, as well as materials for assembling three micro kilns for general sintering, casting and annealing processes, which are our equipment for making refractory bricks. Of course, Anna provided bulk materials, which we needed to build ourselves, DIY...... Hehe, I'm sorry for the confusion I introduced? ”

"It sounds a bit messy, but it should be good to see what you said so lively!"

"Yes, although I didn't understand anything, but seeing Mr. Zhao, they still nodded frequently, so it's okay, please continue, please continue, please continue to ......"

Seeing that everyone was not bored of listening, Brother Hou was very excited, so he took out a piece of paper and raised it and said:

"Guys, I have a real traversal weapon here!"

Hou Xianglin paused when he said this, looked up at everyone, and found that everyone was looking at him blankly, without any reaction, so he said:

"Guess what, what is this?"

Hou Xianglin smiled and shook the paper in his hand loudly.

"I don't want to guess, I don't have the mood to ......guess when I think of working as a coolie under Brother Hou after crossing over."

"And digging clay ......"

"Don't let us guess, guess it's glass!"

At this time, Hou Xianglin, who realized it later, realized that what he just said was too self-conscious, too focused on his professional content, and did not take into account everyone's emotions, so he quickly restrained his expression, put on a sincere, serious and solemn face and said to everyone:

"This ...... How so...... A miniature glass workshop to be exact. ”

"Sure enough, it's ......"

"Hey, you know it's!"

"Holy! Brother Hou, don't you say that I almost forgot! This is a real weapon for crossing! ”

"I'm afraid it's a rotten weapon, if you write it into a novel, readers won't read it immediately......"

"yes, the time travel novel uses rotten stalks."

"Not really, right? Our miniature glass workshop is different! ”

Hou Xianglin responded to everyone's complaints in a timely manner.

"What's the difference?"

"It is a real modern technology, and once it is put into production, it can be invincible all over the world! To hell with the monopoly of the Europeans! ”

Hou Xianglin said loudly.

"Oh? Is there such a cow? ”

"Well, although I still have to do coolies, I have to say, this project is the focus!"

"Can you produce flat glass?"

"Can you make a glass mirror?"

"Can you make glass cups?"

"If we can make glassware of the same quality as the supermarket supplies, we might make a fortune!"

So the onlookers finally couldn't help but ask questions, and the overall atmosphere tended to be warm.

"Of course you can give birth, but I don't think Uncle Anna is a little too cautious? The process is fairly simple and a bit backward......"

Hou Xianglin looked at Anna, who was standing in the distance and chatting with Nicole, and said.

"Why?"

"What do you mean?"

"How backward?"

Hou Xianglin saw that Mr. Zhao also came over, and quickly showed him the list, Mr. Zhao frowned and looked at it a few times, and said to everyone:

"Not to mention that the flat glass production equipment we have is miniature, this process is indeed relatively backward! Because it is neither a real lattice process nor a float process, but a simplified flat draw glass production plant! ”

"Or a simplified version of ......"

Hou Xianglin added, but Mr. Zhao looked at the list again and said:

"Of course, there are also highlights, such as the fact that the two miniature furnaces look good and produce a high calorific value."

"But obviously the output is very average, Mr. Zhao, look at the size of this melting furnace, I estimate that it can melt up to one to two tons a day, right?"

Hou Xianglin pointed to the list and discussed with Mr. Zhao, there were several science and engineering men around them, and at this time, Mr. Zhao nodded and said while flipping through the stack of materials in his hand:

"Well, from the melt to the discharge, but also to remove impurities, it is estimated that the real melting of qualified glass liquid can have six achievements are good, when it comes to flat glass, here...... Well...... The maximum size of the product is 30 to 60 cm square flat glass, and no matter how large it is, the equipment has to be modified, or completely changed to float process......"