Ma Qianzhu struck while the iron was hot: "Since everyone agrees with this plan, I suggest that our overall construction start with the second phase of the Bairentan Hydropower Station." This overall jihua is named 'the first five years of jihua'. ”

In the first five-year Jihua system envisioned by Ma Qianzhuo, the Wenlan River system project has the three major functions of shipping, irrigation, and power generation, and the industrial and agricultural system is laid out with the river as the center, which is completely consistent with their original idea, but this plan more specifically proposes the use of the Wenlan River.

In the future, the industrial base will be all located in the lower reaches of Hedong, and if there is any expansion in the future, it will be extended to the Mayuan Peninsula. In order to make use of a series of ports around Mayuan Port and Red Plate Port. In the 20th century, several large-scale industrial investment projects and development zones in Lingao County were also located in this area.

The group has planned two major industrial zones: the steel-chemical industrial zone centered on Bopu Port. Give full play to the advantages of large shipping volume and low price. Anthracite coal from Vietnam, pig iron, wrought iron and bituminous coal from Guangdong, iron ore from Tiandu, timber from Fujian, and salt for chemical industry from the Ma Yuan Peninsula......

The Machinery Industry-Light Industry Zone, centered on Bairencheng, is also arranged in Hedong.

In this way, the traverser has only . Two industrial zones. Industrial zones are few and concentrated, the area they need to be protected by force is smaller, and the shorter the lines to transport electricity, coal, equipment and finished products, the cost of transportation and energy consumption can be minimized.

Steel and chemical products manufactured by Bopu, as well as. All kinds of raw materials transported from the sea can be directly transported to Bairen Industrial Zone for processing and manufacturing through the water transportation channel of Wenlan River, and the finished products can be transported to Bopu for export by water.

The current electricity supply is in the form of 100 thousand waters. After Jihua can produce its own boilers and power generation equipment in the future, the group will set up a thermal power plant in Bopu to use Hongji anthracite coal from sea to generate electricity and directly supply power to the high-energy chemical industry.

The Commission of Industry and Energy of Jihua within the first five years of Jihua. Accomplish the following objectives:

The construction of a complete iron and steel enterprise, including: concentrator, mine. Stone sintering furnace, coke oven, blast furnace, hot blast furnace, iron melting furnace, in addition to the existing small converter, install another converter.

The concentrator has 2 concentrators brought from another time and space. 5 crushers and 2 crushers.

A small special. The special steel mill uses the crucucible method to manufacture various special steels.

A rolling mill with:

There are 2 sets of primary forging machines, 2 sets of hot rolling mills, 2 sets of hot punching machines, 2 sets of cold rolling mills, 2 sets of cold drawing steel pipe machines, 2 sets of cold drawing bar machines, and 2 sets of cold rolling steel pipe machines. It can be easily cold-rolled and hot-rolled steel plates, strips, wire rods and various sections of various commonly used specifications.

By the end of 1634, the iron and steel complex had reached the level of 80 tons of iron per day, 50 tons of crude steel, and 100 tons of special steel per year.

Smelting of non-ferrous metals: 160 tons of blister copper, 120 tons of electrolytic copper, 3 tons of nickel ingots, 10 tons of cobalt, 140 tons of lead, 80 tons of zinc, 12 tons of tin, 20 tons of antimony.

These non-ferrous metals are mainly imported as ores or crude products, and are further refined in the metallurgical sector.

Non-ferrous metals, although not in high demand except for copper and lead, are essential in many key places. Fortunately, these products were already produced on a considerable scale in the Ming Dynasty, and there was no problem in importing a certain number of crude products from the mainland.

The metallurgical industry seems to be a huge system, but its five years are the least difficult. With the existing industrial system, the traverser has been able to provide essential materials such as cement, bricks, and refractories without difficulty. The rolling mills with the most jishu content all use equipment brought from another time and space, and as long as it is installed in place, it can be put into use. As for the blast furnace, there is not much of a jishu problem for the traversal.

"In addition to refractory materials, mineral processing and blast furnace feeding all require some special equipment, and we hope that the machinery department can provide it. I'm going to need your support when the time comes. Ji said silently.

"No problem," Zhan Wuya agreed, "The key is that the steel can ensure that I have seen these equipment, it is not difficult, and some can be made of wood." ”

The goal of the Ministry of Machinery Industry is to complete the self-upgrading system of the machinery industry within the first five years, which can not only meet the production and manufacturing of various special equipment in the industrial system, but also complete self-renewal and upgrading.

But the problems facing the construction of the Ministry of Machine Building Industry are much more complicated. Because of the tonnage of the ship, the mechanical equipment brought by the group is quite limited, and many special equipment is limited to tonnage and space is not brought.

Theoretically, these most basic lathes, punches, vises, planers and other so-called "industrial machine tools" or general machine tools can make any product, but the truth is far from so simple.

Since mankind entered the era of industrialization, a clear development route of machine tools is: higher efficiency and lower production costs. The growth of processing efficiency of general-purpose machine tools represented by lathes is very low, and unless there is an infinite increase in workers and equipment, the output cannot go up.

The simplest is the screw, which is commonly used in industrial equipment, and this little thing is called "standard parts" in industry. The so-called standard parts refer to the structure, size, drawing method, marking and other aspects have been completely standardized, and the commonly used parts (parts) produced by professional factories, such as threaded parts, pins, washers and so on. These parts are used in the connection and fastening of various industrial equipment.

This kind of standard parts, historically, were indeed processed by ordinary lathes at the beginning, but the processing efficiency is very low, and workers have to cut many times during processing, and each time they have to carefully set the tool; The manufacturing cost is also not economical - a round bar is clamped on it, and Zuihou cuts out a small bolt, which is a huge waste of material and requires high workers in the machining.

Therefore, in the actual production operation, the standard parts are manufactured with special machine tools, even if the most simple and common hardware such as iron nails are manufactured, modern times are also produced with special machine tools.

The first task of the Ministry of Machinery Industry is not to manufacture their equipment for various industrial departments, but to complete the equipment supporting in its own system and manufacture a number of special machine tools and equipment. A new mold factory, a foundry, a standard parts factory, a bearing chain factory and a tool factory were built.

"You don't know how much this system will boost industry once it's in place. The machinery industry can manufacture different special machine tools according to a variety of different product needs! Combined automatic machine! Wang Luobin said excitedly, "Do you know what big industry is?" With this system, we have a real big industry. ”

"Let's take an analogy," Li Yilao, who has made black guns, explained: "Everyone is very worried about the supply of bullets now, in fact, it is not difficult to make bullets, I went to the machinery factory to use the existing equipment to build and build, but in this way, I can't make dozens of rounds a day, and you will be gone as soon as you pull the trigger." If we make a bullet production line, even though we need to make more than 30 pieces of equipment, we can make thousands of bullets in an hour, and this productivity is frighteningly high. ”

"Can you do K98?" Wei Aiwen asked.

"K98 is a piece of." Xiao Bailang looked disdainful, "AK47 is no problem." ”

"I'm going to want K98, or MP44." Wei Aiwen is not a loyal Harder.

"After the completion of the self-supporting of the machinery industry department, we will shiyan reproduction of general-purpose machine tools, or self-replication." Zhan Wuya said, "After all, there will not be only one machinery factory in the future, and the demand for general equipment will be great." ”

Jiang Ye said: "Now we don't have as many machine tools as a workshop in the factory where I used to work. ”

Ma Qianzhuo agreed: "Now we are operating on Hainan Island, and in the future we will occupy Taiwan Island or land on the mainland. If you want to replenish firearms and ammunition, and if you want to develop the local industry, you can't always make all the equipment in Lingao and then transport it. It is still necessary to set up a few more machining centers. ”

"I don't see it that way." Wen Desi said, "To ensure the stability of our regime through the generations, the core system of the machinery industry cannot be spread, and it must be firmly in the hands of the crossing group." ”

He further explained: "Suppose: if a local old fortune wants to open a textile factory, we can provide the most advanced textile machinery and power equipment in this time and space at a discount, and at the same time provide maintenance services. However, apart from using the equipment, he could neither repair nor copy it. Everything depends on us. ”

In his vision, in the future Shijie, only the Crossing Group will have the ability to manufacture machinery and equipment, and the rich people or countries in this time and space can buy weapons, equipment, ships and vehicles made by the Crossing Group, but once these things lose the maintenance guarantee provided by the Crossing Group, they will be completely scrap metal. In this way, the entire industrial lifeline of Shijie is in the hands of the Crossing Group.

"Isn't this the Cult of the Mechanics in Warhammer 40K?" The associations of Xi Asia are very rich.

"Can't science be a religion?" Wen Deji asked rhetorically, "We have mastered science and industry beyond the level of this time and space, so it is not too much to ask for domination of the earth, right?" ”

"Then there has to be the Grey Knights of Science!"

"You stupid, you might as well set up a Sisters of Science. Sister nun is very good. ”

"Who's going to be the emperor?"

……

"I'll talk about this later," Ma Qianzhuo quickly pulled the topic back, "Let's talk about how much special equipment the Ministry of Machinery Industry can provide for various departments." ”