The next day, Bailiyan set off for Yongxing, adjusted the military battalion, arranged the production scheduling of Yongxing City and the resettlement of the Ligong faction, and then discussed in detail with Su Fangyi and Zong Botai about the rebellion.

In view of the developed education in Yongxing City, Bailiyan posted a recruitment notice in the city, and the treatment was half of that of ordinary sergeants in the military battalion, and the best ones were selected when they became adults.

As soon as the notice was posted, more than 2,000 people signed up within three days, and more than 4,000 people finally signed up.

In view of the fact that Yongxing education has not been perfected for a long time and the talent base is weak, among the more than 4,000 people, according to their ability and achievements, only 300 people from the middle and upper reaches will be selected, and those with brothers in the family will be given priority.

The reason why the upper swimmers are selected is that the midstream ones are more enterprising, and the more frustrated their personalities, the more courageous and passionate.

Second, there are few speculators in the middle stream and many pragmatics, and the army wants loyalty, not political opportunists. Those with active brains, in the face of money, are often easy to develop into traitors and traitors.

Third, Yongxing City has been grinding a sword for more than ten years, and the reserve of new talents is thin, especially the promotion of mathematics education in Yongxing City has only been a few years, and a considerable number of more than 4,000 people who have signed up have completed primary mathematics courses.

Resources are as expensive as gold, and talent is even more so, and the technical field needs knowledge-based talents, and better manpower should be invested in the technical, academic and educational fields, and it is undoubtedly a huge waste to send them to the army. Especially for teenagers between the ages of 13 and 15 who are able to continue their studies and further their studies.

In addition, Bai Liyan was even more worried about King Xian's suspicion, a thousand people, Yongxing City accounted for too much, which would inevitably make King Xian suspect that he was secretly cultivating descendant forces. The suspicion of the monarch is often more dangerous than the cruelty of war.

The 300 people were immediately handed over to the military battalion for assault training, and at the same time, the king of Xian added more than 570 people, among the more than 570 people, more than 400 were Yan Xiao, Jiang's relatives, and dependent magnates, and the rest were men who were powerful and powerful in various places.

In this way, the second son of these powerful relatives was brought into the army, one was experience, the other was to be a hostage, and the third was to be a bargaining chip in the hands of King Xian to balance the lords and magnates in various places, and at the same time, it also cultivated the human base of the Jiang family and the children of the salt lord in the new army in the future, which can be described as killing multiple birds with one stone.

The rest of the quota will be recommended by various armies and localities, or recruited, and the quota of 1,000 people will be made up by February.

It is expected good news, on the twenty-sixth day of the first month, it has to be reported that the Changsun army suffered a defeat in the glutinous soup, and the black turban army quickly evacuated after the strong attack, and waited until the main force of the Changsun army divided the troops to return to the glutinous soup, and the Changsun army besieging the high savings was hit head-on again, and the casualties were not small.

Bai Liyan was inspecting the cannon in Xicheng, and when she learned the news, she informed Zong Botai and Zhao Anling of the news:

"Mr. Zhao really expected things like a god, this battle Changsun lost his troops and lost more than 70,000 or 80,000 casualties, I am afraid that it will take at least two or three months to ease his strength."

"The eldest grandson has always been arrogant, and the Shengyan Heavenly King withdrew Gao Chu on his own, and now it seems that he is advancing by retreating, making the eldest grandson army careless, and then making it sluggish with a strong blow."

Zhao Anling added his previous judgment, at this time Zong Botai said:

"Although the eldest grandson was defeated, he did not hurt his muscles and bones, and the time of the three counties of Ganfu, Shangguan and Wanchuan is still extremely urgent.

"Well, what Mr. Zongbo said is extremely true, the eldest grandson country wants to take the land of the three counties, and our army will also take it, the two armies are advancing from north to south, and the competition is time, if you are eager to win, it is really possible to fall into his treacherous scheme, what is Mr. Zongbo's clever plan to help Benhou break this difficult situation?"

"Master Hou can't go quickly, he should take the surrender and rebellion as the top, and the decisive victory by force. I expect that after the eldest grandson recovers the two counties of Gaochu and Shutian, it is very likely that he will invade the Sishui River with the length of his naval army, and capture Qingtian from behind, so as to open up the waterway to Ganfu and Shangguan in the south.

Therefore, the Black Turban Army is prepared, and there will be a fierce battle in the lower reaches of the Sishui River in the future. ”

The eldest grandson and the Xian army advanced north and south, and whoever defeated the frontal enemy first and who occupied more land in the three counties first was generally unfavorable to the Xian country.

Changsun State borders Ganfu, Shangguan, and Wanchuan on the whole line, while Xianguo develops from east to west, and does not border with the three places, and only by taking the three counties all the way can he completely control all the land, of which Wanchuan is the key.

The mountains of Wanchuan County run east-west, or break through from east to west, or break through from west to east, and cannot break through from the south and north, so Wanchuan will either take all or lose all, and there is no possibility of taking only half of it.

Can't take Wanchuan, even if Ganfu and Shangguan take half of it, it is also an enclave, the south will be cut off by Zhiguo, and the north will be cut off by Changsun, in the absence of airplanes and rapid transportation systems, the land enclave, and there is no waterway to connect the enclave, the value is not great.

When talking to the two, Jiang Jie reported from outside:

"Master Hou, Master Cheng from the left gate has arrived."

"Oh, please come in."

"No!"

Due to the small number of people who moved into Yongxing City from the right gate, the time was short, the things learned were not as much as the left gate, and the mathematics and advanced concepts were much different from those of the left gate.

Cheng Jiyuan, who was ordered by Duan Songzhi to share relevant information to help restore balance between the two factions, has been busy in recent months with the selection of sites and the establishment of the school of the Gang Gong faction.

When Cheng Jiyuan came to the door, he was very polite:

"Yongxing Hou is busy with business, and the old man is bothered."

"Master Zuomen said seriously, it is the duty of our courtiers to share worries for my king and solve problems for the people, and this marquis will never dare to relax. Master, please take a seat. ”

Asking Cheng Jiyuan to sit down, Bai Liyan asked again:

"The master is here today, but there is something important?"

"That's right, my left door has completed the design of the iron gyrator, and the old man has brought the drawings, which are based on many requirements put forward by Yongxing Hou, and there are many improvements in the drawings, and I want to ask Yongxing Hou to take a look at it."

"Oh, yes, that's great!"

Cheng Jiyuan pulled out a stack of drawings from his leather pocket, one of which was the final assembly drawing, and the rest were parts drawings.

After the mechanical drawing method was taught to the Gonggong School, the drawing of the Gonggong School became more and more sophisticated, and the preliminary formulation of mechanical standards and tolerance tables further clarified the concept of accuracy and shape, so that the drawings did not become jerky and difficult to understand due to distortion and exaggerated expressions.

The rotary car designed by the Ligong faction, in fact, is the lathe, the overall performance and requirements are not high, subject to the power, processing conditions and design experience, the first design and manufacturing is still based on the accumulation of experience and attempts, the lathe model is not very large, only half of the stroke of the standard 6140, and the batch will not be too much, so as to accumulate experience for the future redevelopment and improvement of work technology

The structure of the machine tool is mainly simple, easy to manufacture and produce, especially to adapt to the current fitter processing, so as to reduce the workload as much as possible, and at the same time restricted by the concept and technology accumulation, there is no design gearbox, only one spindle, two pairs of gears and a trapezoidal groove pulley.

The emergence of pulleys is very important, which solves the problem of flexible connection and shape between external mechanical power and internal transmission mechanical power.

The direct power source and the mechanical hardware of the interactive rigid connection, can not ensure that the power source and the axial power of the machinery are located in a vertical direction, while the rigid power connection, will increase the damage rate of metal parts, let the spindle produce serious even, outrageous radial runout, resulting in the roundness of the processed parts deteriorate, and the pulley solves the problem of flexible power transmission very well.

Of course, the technical starting point can not be too high, the manufacturing of pulleys is still mainly based on casting molding, supplemented by fitter processing in the later stage, first solve the problem, and so on, once the lathe comes out, and then solve the good or bad. The belt is woven with a blend of hemp and cotton, folded into strips and cast with liquid rubber for ease of use.

At the same time, due to the limitation of processing capacity, the three-grip chuck will be held by machinery instead of the threaded three-grip.

Set up a knife holder, because there is no thread, can not be pressed with screws to the tool holder, the preliminary design is hanged with an iron hoop, so in order to facilitate fixation, there is only one knife position. The tool holder is meshed with a rack and pinion, and the manual hand crank provides the cutting power of the outer edge.

The lathe is pulled by water or animal power, so there is a flywheel connection between the machine tool and the power, and the flywheel transmits power to a pair of large 45-degree bevel gears up and down to provide power for the machine tool. Since the gearbox is not designed, the speed regulation depends on the speed of water and animal power.

Of course, it is also possible to change the bevel gear and gear data to achieve the purpose of changing the transmission ratio. But for the time being, it is more economical and convenient to adjust the animal power or water gate. And affected by the output torque of animal force, whether it is the spindle speed or the cutting depth of the tool, it is impossible to be too high.

The drawings are very simple, there is no complex transmission structure and calculation content, but subject to the current equipment and production capacity, in addition to the bed can be used pig iron preset structure, most of the accessories can still only be cast in molds, manual freehand with files, chisels, grinding processing, to go to the blank allowance, so that it meets the design requirements.

But as soon as the first lathe rolls off the production line, it means that all rotary parts can be machined on a lathe and then quickly iteratively expanded. Of course, the tool material also needs to keep up.

After roughly reading the drawings, there was no problem, and Bai Liyan folded the drawings and returned them to Cheng Jiyuan:

"There is no problem with this picture, Master Cheng can rest assured that he can make it, but whenever he needs it, he can ask Zhao Ju Taishou, and Zhao Taishou will definitely help."

With Yongxinghou's words, the old man was relieved. In addition, this is the diamond that Hou Ye handed over to the old man four months ago, and the old man has ordered someone to polish it, and I don't know if it can meet the requirements of Yongxing Hou. ”

Cheng Jiyuan took out a money bag from his arms and poured it on the table to reveal dozens of different diamonds, Bailiyan took out one and looked at it carefully, and was very satisfied:

"Yes, the master of the Ligong School is really ingenious, no wonder there is a saying that the world's famous weapons are out of the Gonggong, and when I see it today, it really deserves its reputation."

"Hehaha......" Cheng Jiyuan twisted his white beard and laughed, very happy: "To be praised by the Marquis of Yongxing, it is not in vain for me to send a lot of hard work." This diamond is a strange hard thing in the world, polishing such a thumb, less than two months, more than half a year, it is really not easy. ”

"What Master Cheng said is extremely true, this diamond is indeed the hardest thing in the world, I think Master Cheng must use diamond to grind diamond, right?"

"Well, exactly. Gold and iron are not as strong as it, so they can only be tilted with diamonds. If the old man's guess is right, Yongxing Hou wants to use this to sharpen iron. ”

"Yes, cutting any steel from this material is like clay, and it is very fast. By the way, there is diamond powder in the polished diamond, has Master Cheng ever asked people to put it away? ”

"Yongxing Hou rest assured, the old man is in a glass bottle and there is an old man's residence, which can be used at any time."