In fact, with the technological level of Danzhou at this time, as long as the stability of the plastic passes, it can even be launched on the injection molding machine project!

With electricity, the workshop of manufacturing equipment, even if it is manual injection molding, it can achieve the effect of shocking the world, which is inseparable from the two billion francs invested by President Meng in Germany and France!

A large power plant near Danzhou Port has been built, AC power has been widely used by the boss, and the telephone has also come out!

In its original history, the telephone was invented by the American Bell in 1876. Pen, fun, pavilion www. biquge。 info

He used two wires to connect two transmitters and receivers with the same structure and a vibrating diaphragm on the electromagnet, and first realized the communication at both ends. However, the call distance is short and the efficiency is low.

In 1878, the charcoal microphone appeared, which greatly improved the efficiency of the telephone transmitter.

The receiver structure has also been improved. The earliest telephones were magnet telephones, powered by their own batteries and sent call signals by hand-cranked generators.

In 1880, the common telephone set appeared, and the common power exchange was changed to collect electricity, eliminating the need for hand generators and dry batteries.

In 1891, a rotary dial type automatic telephone appeared, which could send out DC dial pulses, control the action of automatic switching, select called users, and automatically complete the exchange function. Thus pushing telephone communication to a new stage.

President Moe played a role in the development of the telephone.

First of all, President Meng knows the direction of the development of the phone, and informs the American scientists of the structure of the phone, these people are all President Meng last time from Europe and the United States to go around and bring back, after that, Xuan Yuewu and several webmasters in Europe also continue to continue to network technology talents from Europe and the United States, this is an era of knowledge explosion, according to the requirements of President Meng, as long as there are good creative scientists, they will provide funds, and they will come to Danzhou!

President Meng's good ideas are very broad, anyway, as long as they are not accepted by foreign governments, he wants them all!

President Meng has no way to make the phone develop to the level of electronic buttons all at once, he doesn't have that level, and current scientists can't achieve this speed of research and development through President Moe's description!

However, this kind of rotary dial telephone, is enough, you know, later generations to the sixties are still using these telephones, and even in the seventies, eighties, a large part of the region, are still using this kind of rotary dial telephone, in the development of the telephone, President Meng suddenly raised the history of a hundred years!

"How long does this stuff last? Will we always be ahead? Princess Katrina Cafu happily called President Moe in the next office.

President Meng smiled: "It will be ahead of the next century!" ”

Princess Katrina Cafe snickered, and the president was exaggerating again, but this thing was really a novelty.

President Meng is not exaggerating, however, he knows that it is not easy to keep this kind of technology secret, and he has no intention of keeping it secret, because it is easy to imitate, however, President Meng does not plan to promote it for the time being!

If President Meng does not promote it to Europe and the United States, at least in five to fifteen years, the telephone may not be popular!

President Moe plans to wait until the development of plastics is mature, along with his wires, switch parts, and electrical auxiliary materials to dump all over the world.

President Meng is to use technology to make his colonial empire rise! Rise above board, don't go crooked! President Meng looked down on the opium invasion of Europeans ten thousand, and if he got rich in this way, he would sooner or later be sanctioned by heaven.

President Meng feels that he is the way of heaven!

A perfect personality needs a perfect humanity, and President Meng wants to make the world clear again between good and evil!

Blueprints can be many!

There is only one final product!

So there can be three kinds of renderings for clients and bosses! Too much is shoddy! Nobody will like it! It doesn't matter how many ideas you have! There must be only three of the best presentations! There has to be one of them that you think is the most perfect! The rest is just a foil!

In this way, the right to speak in product design can be in your hands!

Three uncompromising product design drafts will only leave you in a tangled choice.

How to make sure your blueprint can be realized!

Then you must be aware of all the processing technologies currently on the market!

And the price of these processes must also be understood!

Processing technology and materials are closely related! Each material has its own unique process!

For example, plastics are: injection molding, blow molding! FRP! Double Injection Molding! Slush molding! Blister! Flip the mold! Hand! Hot stamping! uv！

Only with an understanding of the process can we ensure that the blueprint can be realized!

That's what makes sense in industrial design!

"Inspiration and design related to insight and craftsmanship! Come to life! You have to find out! And go to the scene for yourself or take things apart! Research what's going on. President Meng held the phone and spoke generously to tens of thousands of foreign engineers and thousands of Danzhou technicians.

The widespread use of telephones in Danzhou has made President Meng full of confidence, at least, in communication, Danzhou has been ahead of the world.

No matter how far away you are, you don't have to run a dead horse, eight hundred miles are urgent, hum, I can make my words clear in a second.

The development of communications, embodied in national defense, also means that in order to prevent the Huai Army's sneak attack, the Danzhou Army does not need to put more than one regiment of troops, each pillbox uses telephones, the Danzhou Army Headquarters uses telephones, President Meng's office, bedrooms, Danzhou Army's military fortresses, arsenals, arsenals, and telephones everywhere, as long as one battalion, it is enough to withstand the effect of a regiment in the past.

It can also greatly improve efficiency, how much cost can be saved?

If there is anything simple, you can make it clear on the phone, save time and effort by using the phone, and improve the efficiency of your work.

The use of the telephone can save physical exertion and have more vitality to visit prospective customers; Because I don't have to walk from house to house, I have plenty of time to eat and dress up, and I have the style of an invitee.

Telephone conversations can eliminate the fear of rejection; How to speak and how to deal with rejection has been spelled out, not only can you talk with confidence; And you can end up at any time according to your own wishes.

Hehe, Danzhou's office has entered the most efficient era because of the telephone, Danzhou's military and commercial prosperity, and because of the telephone, it has entered the information age in advance, and President Meng's next target is radio!

President Meng spent two billion francs, although the cost performance is very low, but for the take-off of Danzhou's large industry, it is crucial, otherwise, if you want to find a thing to take apart, there is not, although many of the equipment is very old, but the principle is like this, on the basis of the real development, than the design out of thin air is definitely much faster.

Take President Meng as an example, a lot of equipment, after President Meng saw it, he was able to immediately find the shortcomings of this equipment, and he could improve it, but President Meng is not even at the level of entry, that is, it is slightly better than ordinary high school students.

If there is no physical object as a reference, it is impossible for President Meng to independently produce a generator and an instrument!

President Moe's introductory course in the technical university is CAD drawing, why learn CAD?

Because CAD is the bridge of communication between the company!

Not everyone will be three-dimensional!

Or a lot of the files that others send you are just CAD!

If you don't know CAD, you are blind in the R&D department of the enterprise!

There's a lot of information you can't understand and express!

Of course, the absence of computers does not mean that there are no drawing standards, in fact, at the end of the next century, there is the popularization of computers, and before that, it did not affect the take-off of the industry!

The best way to express details is in 3D. Therefore, the hand-drawn work only undertakes the idea of a general outline.

And this idea is often already in your head. Your hand-drawn drawings just deepen your vision.

You can't stay in the hand-drawn stage for a long time.

Such a short time required to create the contours of three ideas.

It takes a long time to build.

Otherwise, scratching the scalp will not help.

And the common sense of product design should be clear. The time for hand-drawn designs will not take more than one working day.

Industrial design is a hodgepodge!

When you dig open a successful product and find out, there are countless question marks in your mind, why did he design it this way?

Why did he design it that way?

When one question after another is revealed.

You one day take apart a product and know the designer's design intent.

You've already embarked on the Yangguan road of product design.

It's much better to study other people's designs than to study hard.

When you encounter a problem, looking for information with a purpose can make you remember it unforgettable.

President Meng also personally participated in the compilation of "Industrial Design Basics", combined with the characteristics of modern industrial design education, comprehensively and systematically introduced the basic ideas and thinking points of industrial design in the process of modeling design, as well as the factors closely related to modeling design, such as material processing technology, color and surface treatment, modeling semantics, modeling structure and function, and form aesthetics.

Originally, Klinsmann & Co. already had a number of mature enterprises, most of which moved to Danzhou, and the first batch of production was these Danzhou original ecological enterprises, which should be said to be enterprises brought from Tianjin.

Among them, the more typical ones are the daily chemical factory and the factory, Nong Jinsun's factory has combined the characteristics of traditional Chinese medicine and Western medicine, and continues to recruit the world's pharmaceutical talents at the same time, but also founded a medical university in Danzhou!

Of course, it is said that the medical university is not even up to the level of secondary school in later generations, but President Meng is doing education at this time, just to provide a direction for the industry, to move first, take one step at a time, if there is no university, how to come to the laboratory?

Without an excellent working environment, how can we attract more talents to join?

The overall level of education will not be able to come up for a while, and it will take ten to twenty years, but President Meng did not wait passively!

President Meng's investment in industry is 1,000 percent, Danzhou is losing a lot of money every month, not that President Meng is not interested in making money, he has no choice, at this stage is not waiting for the stage of getting results, but a thorough investment stage. (To be continued.) )