The horn is 2 feet 5 inches long, and at the same time has 3 bell colors, and the texture is not flawed, so it is called a cow wearing 1 ox on its head. When choosing a glue, choose a red and dry one. Dry glue, deep and shiny cracks, the texture of the cracks is round and angular. Deer gum is made of deer skin or antlers as raw materials, deer gum is blue and white, horse gum is red and white, cow gum is live red, mouse gum is black, fish gelatin is white and yellowish, and rhino gum is yellow.

Nothing in the adhesive category can be compared with the adhesion of glue. When choosing tendons, the small tendons should be long and long, and the knots at the ends of the tendons should be large and moist, and the beast with such tendons must move quickly, and make a bow with its tendons, and shoot arrows like the swift beasts. The tendons should be beaten well and ripe, the lacquer should be clear, and the silk should be like the color when it is boiled in water.

Get these 6 immaculate bow materials, and then you can make a good bow. When making the bow, the dry wood is analyzed in winter, the corners are treated by boiling in the spring, the tendons are treated in the summer, and the dry, horns and tendons are combined with three kinds of materials such as glue, lacquer and silk in the autumn, and the bow body is fixed in the cold season in winter, and the paint is checked to see if the paint is peeled off when it is frozen in the middle of winter.

In winter, it is easier to make the bow well-made, in the spring it is easy to make the horn flexible, and the tendons will not be disordered in the summer, and then use glue, lacquer, and silk to combine dry, horn and tendon materials in the autumn, which will be strong and tight, and the bow body will be fixed in the winter season, and it will no longer be deformed when the string is opened, and it will be inspected in the middle of winter.

It is a whole year to determine whether the annular lacquer pattern meets the requirements and to install the wind again in the spring of the following year. The analysis of the dry wood must follow the grain of the wood, and the analysis angle should also follow the texture without obliqueness, and the knots on the dry wood must be cut slowly. The knots are not slow, and when the bow is used for a long time, the tendons wrapped around the bow stem will be damaged.

The knots are hard, and the hard thing grinds the tendons on the outside of it, and the reason why the tendons bulge and do not attach to the bow stem is often caused by this, so the horns should be boiled 3 times, and the bow stem should be boiled 2 times. If the lining in the middle of the bow trunk is too thick, the dry wood will be too hard, and if the lining is too thin, it will be too weak, so the bow trunk should be boiled and treated more, and the lining wood should be added appropriately.

The bow should be wrapped around the silk rope instead of one over and over again, and the density of the bundle must be even. The cutting of the bow must be very delicate, and the thickness must be evenly adjusted, and the glue must be even. The cutting of the bow is not delicate and uneven, and the glue is uneven, and when the bow is used for a long time, the horns will be damaged. The glue wears the corners inside, and the reason why the corners break is often due to this reason.

When disposing of horns, the long horns are placed at the bowkuma, and the short horns are placed at the bow. If the angle at the bow is too short, it will be affected by the angle and bend in the opposite direction, which is called a backcurve, so that the bow will be weak, and the arrow will not be able to move quickly. If the kuma horn is too long, it will be like the bow is always tied to the bismuth, which will affect the drawing of the bow and shoot arrows, not the bow will be beneficial. The bow is used in different directions at the junction of the kuma horn and the horn of the bow, so the arrow shot can be fast; Bones are attached to both sides of the bow, so that arrows can be shot quickly. If the kuma horn is too long, it is not beneficial to the bow to draw the bow as if the bow is always tied to bismuth.

The bow should be cooked and not overripe to make the bow with coal, the horn should be cooked and not roasted with coal, the tendons should be stretched as much as possible without breaking the texture and damaging its strength, and the glue should be cooked and the water and fire used are just right, so that the bow made in this way will not be deformed in a dry place and will not be deformed in a wet place.

If there are imbecile craftsmen, they will inevitably make coal when the horns and dry and wet are easy to dry, only to look good on the outside, and the factors of change are hidden, even if they can be good-looking on the outside, the inside will inevitably change, and no matter how good the appearance is, it cannot be a good bow. When making a bow, the bow should be square and high, the kuma horn should be long and the cover angle should be thin, and even if the bow is drawn again and again, the chord can be matched without weakening.

If the bow is lowered, the string will deform if you push it a little harder. If it is deformed, it will inevitably deform the junction of the horn and the kuma. When the horns and kumakaku meet to become deformed, the bow will be wide and weak, and as soon as the string is pulled down, the entire bow body will be deformed.

The bow has 6 materials. Make the bow strong and smooth when it is drawn; To keep the bow body in place and prevent deformation, the distance between the string and the bow arm should be 3 feet when the bow is full; The horns should be able to support the bow stem to increase the strength, and the string should not be bent and not aligned with the string; When the bow is drawn, the bow body is bent like a ring, and the bow body is not deformed when the arrow is released, but is still bent like a ring.

The material is excellent, the craftsmanship is excellent, and the production is timely, which is called Sanjun; The horn corresponds to the stem, and the stem corresponds to the arrow, which is called Sanjun; Measuring the tensile force of the bow is in line with the three equals; The three three are called nine harmony. The bow that meets the standards of nine and the horns and stems are commensurate. 3 parts of tendons, 3 parts of glue, 3 parts of silk, 3 parts of lacquer, the superior craftsmen use more than enough, and the inferior craftsmen use it insufficiently.

To make the bow of the Son of Heaven, the 9 bows together can form a circle; Make the prince's bow, 7 bows together can form a circle; The doctor's bow, 5 bows together can form a circle; As for the bow of the soldier, the three bows together can form a circle. The bow is 6 feet 6 inches long, called the upper system, and is suitable for tall people; The bow is 6 feet 3 inches long, called the medium system, and is suitable for people of medium stature; The bow is 6 feet long, called the lower system, and is suitable for people of low stature.

When making a bow, it is necessary to determine the appearance and temperament of the user. Fat and short, with a relaxed disposition and slow movements, such a man is to make for him swift and powerful, swift and powerful bows with gentle arrows. Resolute and quick, irascible and swift, such a man will make for him a gentle bow, and a gentle bow with a fierce arrow. If a man's disposition is gentle, and his bow is gentle, and his arrows are gentle, the arrows he shoots cannot be swiftly struck, nor can he go deep. If a man's temperament is impatient, and his bow is strong, and his arrows are strong, the arrows he shoots cannot be struck with care.