The prototype of the machine factory, in fact, was still the first group of assembly workers who followed Yang Yuanzhao, they assembled almost all the tractors in Baotou, the first few were assembled by Yang Yuanzhao himself, and the back ones were led by Yang Yuanzhao and then handed over to them for assembly.

With the workers from all over the country being brought in, some workers who have experience in machine qì production, simply fitters, keep joining it, at first, just to assemble the tractor, and later, whether it is a cement factory, or a cotton textile factory, these equipment, have used them, it can be said that there is a certain experience, with the spread of the loom project, it is time to make it official.

found Liu Shu, and when he saw Yang Yuanzhao coming, Liu Shu had a bitter gourd face and complained: "It's good for you, just draw a circle casually, I'm going to break my leg, now, what kind of task!" ”

Liu Shu said so in his mouth, but he was not satisfied with the movements in his hands at all, Yang Yuanzhao let him break his leg, but one thing is certain, he did it to the fullest, in just over half a year, his worth has increased by at least a thousand times on the original basis. Now, all the equity, loaded together, if sold, at least more than 8 million, of course, he will not sell his own equity at all, discerning people can see that Baotou is developing rapidly, every minute, every second his equity will be increasing rapidly.

In this sense, in the past, Liu Shu was just a small net worth, wealthy and solid ordinary people, and now, he can almost sit on an equal footing with big landlords and big businessmen, and his status in the Liu family has also been greatly improved.

In a sense, it is the most important aspect of the clan, the branch occupies the most resources and gets the best opportunity for development, while the branch is relatively much worse, only by making more efforts than others, can it attract the attention of the main family, so as to obtain better development opportunities, Liu Shu is like this, the call of the main family, in his opinion, there is not much benefit, and he even ignores it.

Yang Yuanzhao told Liu Shu his thoughts as he was, and Liu Shu listened carefully, and still asked in a bit of a daze: "Machine Qì factory?" Is it a machine qì bureau? ”

Liu Shu knew that there was a machine bureau in Taiyuan, which was built by the governor of Shanxi, and it was a machine tool that could repair some machines, especially guns, and even make some imitation guns, as well as reloading bullets and the like.

"It's not the same, the machine is all-inclusive, and so is the machine factory, but for the time being, there is only one project of looms, of course, tractors are also available, but they are not taken out." Yang Yuanzhao explained seriously.

With the expansion of tractors, the highway from Suiyuan to Baotou has been opened to traffic, and next, it is Suiyuan to Taiyuan, Suiyuan to Zhangjiakou, I heard that the foundation has been laid, Yang Yuanzhao did not put the tractor near the city, near the city, or rely on manpower, for the people of Baotou, the understanding of the tractor is relatively clear, we all know that Baotou here, has a sharp tractor, With this, the iron ox that does not eat or drink, but just uses gasoline, hundreds of acres of land a day, there is no problem at all, if it is fast, even a thousand acres.

This is completely unimagined before, but now it is a real storage zài, cultivated land, is the heaviest and most important work in farm work, without a cultivated land, it is impossible to win the banker, and even the seeds cannot be reached, but to turn over the land, manpower accumulation, consumption is huge, but the tractor does not have zài This problem, from time to time someone comes to ask the price, which also includes Liu Shu's main family, but Yang Yuanzhao has never spit out, the tractor is not only placed in the highway company, is placed in the reclamation company, between the two, can be called, of course, these belong to Yang Yuanzhao's own and do not enter the company's account.

"What do you want me to do?"

"Organize people, make a plan by the way, and ...... for the time being" Yang Yuanzhao hesitated for a moment, and finally nodded and said: "Just leave my account!" ”

Yang Yuanzhao has private accounts in the reclamation company, and almost all of the ghosts sent by the eight major Jin merchants before him have produced millions of silver dollars with the help of an all-in-one machine, some of which are paid as wages, and the other part is used as funds to purchase goods from all over the world. In addition, it is the funds invested by each family, after he took out the machine, some were directly withdrawn by him and put into the all-in-one machine, and some were simply placed on the accounts of the company, and sometimes, Yang Yuanzhao would set up some industries that no one was interested in, and he handed them over to Liu Shu and put them on the accounts, which was more convenient to take the accounts.

The personnel are ready-made, these assembly veterans and fitters are basically gathered together, and now, the tractors that are still being assembled, and some of the designed looms are also assembled by them, most of them are in Yang Yuanzhao's warehouse, and a small number, even in the residence, what they have to do now is to find a factory to settle down

Now, the machine factory, in a sense, is just an assembly workshop, and even, the theme of the entire loom, are all put here for assembly after the all-in-one machine is fully produced, but Yang Yuanzhao will still give a few machine tools, one to practice hands, train some fitters, second, with the machine tool is a lot more convenient, some things that are not suitable for using the all-in-one machine to make the machine, you can use the machine tool to make the machine, the task on the all-in-one machine, now more and more onerous, sometimes, Some simple things, or things that can be solved with a realistic machine, are a little unworthy to be produced with an all-in-one machine.

For machine tools, Yang Yuanzhao does not know much, imported some machine tools from Germany, even if it is old, some outdated machine tools, but let Yang Yuanzhao understand the key to the machine tool, the power of the tool, the existing machine tool, at most to modify some power and transmission structure, so that he is more soft control, the most critical is the tool.

Machine tool tool is the most important, even if it is the same in later generations, there is no best tool, the accuracy of the machine tool, and can not be guaranteed, Yang Yuanzhao's hands, there is a set of tools completed by the powder smelting technology in later generations, even if it is an ordinary tool, it is not a machine tool tool at all, but it can be in the integrated machine, draw the shape, and install it on these machine tools. ，

Yang Yuanzhao is an engineer who does engine projects, is a graduate of the Department of Mechanical Engineering of Tsinghua University, as a graduate of the department, for the field of mechanical manufacturing, there are a lot of elective courses and compulsory courses, he knows very well that this set of powder smelting props, this is probably the best thing to bring in the future.

Modern machine tools, there are several development directions, from ordinary tools, slowly improve its hardness, to cemented carbide steel, cemented carbide steel can process most of the metal, on the breadth of his processing, has been similar to modern machine tools, this is the initial development of machine tools.

At present, among the second-hand machine tools, are the application of such tools, even the cutter in the hardness, has not reached the limit, in the all-in-one test, the hardness has not reached the limit, there is a period of development in the future, when the high hardness steel reaches a certain degree dù, the lathe will change from hardness to speed, in the hardness approximate, or slightly smaller, the speed becomes the key, the speed of the machine tool turning, the time used to process the workpiece, has become an important aspect of restricting the machine tool tool, At this time, the speed of high-speed steel is generally several times more than that of ordinary cemented carbide steel, in this case, the speed of the workpiece processed by the machine tool will be doubled.

In the third stage, it is the alloy tool of powder refining, the alloy tool of powder smelting, not only takes into account the characteristics of superhardness, but also the speed is much stronger than ordinary high-speed steel, generally ten times, or even more than ten times, the future development of machine tools, with each passing day, a certain range of dù above, from a few meters per minute, to hundreds of meters, thousands of meters, or even 10,000 meters, are not a problem.

The powder refining steel in Yang Yuanzhao's hands is not the top, it is at least several times stronger than ordinary high-speed steel, so much more, the efficiency of this machine tool is much higher than that of the machine tool of this era.

For example, at the beginning, a part may need to be forged first, and then, with a machine tool, simple repair, it will be formed, so that the machine tool is used for relatively less time, and a certain amount of time is reduced.

But later, with the emergence of high-speed turning tools, the speed is getting faster and faster, the control is more and more accurate, and many parts and equipment in later generations are using machine tools to process on a CNC machine tool, the larger the metal, reduce the surface stress, and improve the structure, are easier to handle, which is also the fundamental reason why the parts and components are getting better and better.

In this era, CNC machine tools have been developed, unless Yang Yuanzhao is crazy, when the electronic control is not hit to a certain degree, CNC machine tools are a joke, but they are simple, have a certain program, and are used to process special machine tools, but they can be designed, for example, when processing a screw, he needs the tool to go down in a spiral shape, as long as the amount of movement of the tool is accurate, you can make a special machine tool that fixes several kinds of screws.

Professional machine tools, in this era, is still a norm, similar to later generations, universal machine tools, fitters can be based on machine tools, make any materials needed for the machine, or a few,

Such a special machine tool, the use is narrow, can only do one, or several products of the same category, but this special machine tool, to reduce the demand for senior fitters, machine processing workers, in a certain way, to cultivate specialized talents, very important, for the current situation of Baotou, very useful.

After completing the design of the textile machine, Yang Yuanzhao designed hundreds of professional machine tools according to the focus and key of each part, and then relied on the all-in-one machine one by one to produce these machine tools.

After completing so many special machine tools, Yang Yuanzhao and in accordance with the standards of German imported machine tools, recalled the machine tools of later generations, produced 12 universal machine tools, in terms of the experience of future generations, professional machine tools, is not suitable for training fitters, only universal machine tools, can play the real role of fitters, Baotou at present, do not need universal fitters, but in the future Baotou developed, built an industrial base, universal fitters, must also be trained.

Yang Yuanzhao, who has experience in later generations, knows very well that a fitter, a fitter who specializes in machine qì, has a great role, just like what is said in the factory, the sixth level is a hurdle, the seventh level can sit in a factory, become the leader among the workers, to the 8th level, are the same national treasures, can be freehand processing than CNC machine tools, higher precision parts, such fitters, sometimes, can change the performance of a piece of equipment, or even a large war weapon, under the process of not being able to mass production, To complete the study of a certain machine, the eighth-level fitter is indispensable.

Yang Yuanzhao will not make the mistakes of later generations, and overthrew the ranks of industrial workers who have spent decades and cultivated with great difficulty, and tens of millions of industrial workers, after the pains, have embarked on the road of restructuring and layoffs.

Later, after deepening the reform and re-picking up industrial production and industrialization, the previous worker system no longer exists, the national treasure like the eighth-level fitters, or, in the loneliness and survival, waste this life, or, in the unfamiliar, even unfamiliar positions, waste their talents, but on the other hand, the lack of high-level workers, so that the accuracy of the machine tool, can no longer get a little bit of improvement.

If he wants to build a heavy industry base, he must start training workers from now on, so that the workers can really go to the factory, from the production of professional machine parts, to universal machine tools, to universal workers.

After understanding Yang Yuanzhao's thoughts, Liu Shu began to plan the location of the factory, in the current industrial zone, there is not much ready-made land, and the factory covers an area that is not too large, three or four acres of land is fine, just leaning on the side of the textile factory, Liu Shu drew a piece of land of about 12 acres, as the location of the factory. RS