Looking at the brothers of the Glory of Kings E-sports Club gearing up and boiling with enthusiasm, He Boge was very emotional!

Cao Wangrong said to He Boge: "Since you want to do it, then I will do it with you!" ”

Hoberg said: "That's right, in the last century, when the three people of the elephant country were still accepting British colonial rule, some people won the Nobel Prize in optics. We have a huge Xuanwu country, can't we build a high-end lithography machine for a few days, and we have to accept the exploitation of those small countries? ”

Cao Wangrong said: "If you spend money, it would be good to be respected, but even the provincial government of Luyan Island jumped up and and peed on our heads." ”

Wei Taiqiang said: "Chai Shuangwen of this Green Salt Island, when she became a high-ranking official, she didn't know that the sky was high and the earth was thick, licking her American godfather's ass all day long, and also banned the export of chips to my great Xuanwu country." Let's do this domestic trade, is her American godfather in charge? ”

Cao Wangrong said: "Chai Shuangwen's family started by selling fake insurance policies, her grandfather was a traitor of the Japanese country, and her father licked the ass of the Japanese people, and in her generation, he actually upgraded and licked the ass of the Americans." ”

He Berg slapped the table and said, "The people of our Xuanwu Kingdom have the hardest bones. ”

Wei Taiqiang said: "The foreign brands of lithography machines are mainly three major brands: Triple A Company in the Netherlands, Nidong Bear Company and Kurosawa Neng Company in the Japanese Kingdom. Zhuang Feier, the largest chip manufacturer in the United States, once bought Nidong Bear products. ”

Chen Biaozi said: "A high-end lithography machine, worth 70 million US dollars, if we get this project, we will send it." ”

Wei Taiqiang said: "It's done, let's do it, our King Glory E-sports Club just needs to pick this industrial flower of modern optics." ”

Cao Wangrong said: "Wei Taiqiang, did you kid eat too much and hold on?" High-end projection lithography machine can be divided into step projection and scanning projection lithography machine two kinds, the resolution is usually between more than ten nanometers to a few microns, high-end lithography machine is known as the world's most sophisticated instrument, just by what we can build? ”

He Boge said: "Wei Taiqiang is right, if we make us, we will make the most high-end things, don't be afraid!" Cao Wangrong is right, if we want to make such a high-end thing, we must also be cautious, we will first make low-end products, and at the same time engage in high-end research and development. As long as I have a breath, I can't watch the United States and the Japanese country, as well as those guys who lick the butts of foreigners and recognize foreigners as godfathers, smug and pee on the heads of the people of Xuanwu Kingdom. ”

We quickly completed the registration of Xuanwu Lithography Machine Development Co., Ltd., began to invest, and prepared to start research work.

When Song Jianguo heard about this, he immediately came over to persuade He Boge, and he said, "Are you crazy? Investing in such an industry may not be fruitful for ten or twenty years. ”

Hoberg said, "Someone has to do these things!" ”

Wei Taiqiang said: "This is Hoberg's dream, and it is also the dream of our Xuanwu people to become a strong country for a century. ”

Song Jianguo said: "It is meaningless for you to do this silently, we must bring in social forces." ”

With the help of Song Jianguo, Wei Taiqiang and He Berg won the support of the media.

Orchestrated by the media, they become the dream story of a young man who challenges a giant.

But as soon as they really entered the industrial practice, He Boge and the others realized that it was not an accident that Xuanwu could not produce such high-precision things, first of all, the industry was not matched, and the domestic market in this area was too narrow.

Hoberg hired a group of skilled workers, and a group of researchers. As a result, they found that according to the research and industrial level of the Xuanwu Kingdom, they could only build the lowest-end lithography machine at most. It is the kind of lithography machine with contact exposure, and the mask of this lithography machine is in direct contact with the photoresist layer.

The graphics it exposes are at a resolution comparable to those on the mask, and the device is simple.

Hoberger invited Lin Fanwen, an expert in the field of lithography machines who came back from the Massachusetts Institute of Technology in the United States, who had worked in the Netherlands, and he told Hoberg: "Contact lithography machines, according to the different ways of applying force, are divided into: soft contact, hard contact and vacuum contact. Soft contact is the substrate adsorbed through the tray, which is similar to the substrate placement method of a homogenizer, where the mask is placed on top of the substrate. This is the simplest, and Hoberg can make it in a factory that he invests in. ”

However, Lin Fanwen, an expert in the field of lithography machines, told him: "This photoresist contaminates the mask, which will lead to the wear and tear of the mask, once the mask is damaged, the life of the mask on the lithography machine is up, and this machine can only be used 5 to 25 times." Producing products with this kind of stuff is prone to accumulating defects. ”

"This is the industrial level of the seventies of the last century, and now the major developed countries have been eliminated by the proximity exposure method, but the domestic lithography machines in our Xuanwu country are all contact exposure, and the development institutions of domestic lithography machines cannot provide the productization of non-contact exposure with higher process requirements," said Hoberg. ”

Lin Fanwen said: "Indeed, the contact lithography machine also has hard contact, which is to push the substrate through the air pressure of nitrogen to make it contact with the mask. There is also vacuum contact, which is pumped between the mask and the substrate to make it fit better. In actual production, the vacuum of product accuracy is greater than that of hard, and the hardness is greater than that of soft. The tighter the contact, the higher the resolution, and of course the tighter the contact, the greater the damage to the mask and the material. ”

Hoberg said, "You mean, there is no solution to this thing for the time being? ”

Lin Fanwen said: "We can only produce some simple copycat DVD players, or prepare for the promotion of the mobile phone market, I estimate that there is also a copycat trend." ”

Hoberg said: "Copycat? ”

Lin Fanwen said: "Shanzhai is also a way to live, but we have to survive first." ”

Hoberg said: "You go to produce DVD players, but don't make copycats, I would rather do less advertising, but also produce high-quality products, we make less money, but also to ensure that the quality is not bad!" ”

Lin Fan said: "Okay, then I'll do what you want." ”

Hoberg said: "The shape of the DVD player must be fashionable, and if it is a mobile phone, the materials used outside must be good!" You need to have a sense of style so that you can attract customers. It's really not good, we produce sockets first, it's not high-tech, but at least it's not a copycat. ”

At this time, Song Jianguo found He Boge, Wei Taiqiang and others, and he said to He Boge: "The 20 million funds raised in advance are almost burned!" ”

He Boge nodded, and Song Jianguo said: "I have long advised you to make lithography machines and chips, and that is not to be done now, wait until you have a billion billions, and then do this, otherwise you will die before you can do it." I have a good project on hand that you can work on together, absolutely short. ”

Hoberg said: "What kind of project is so evil? ”