There are many kinds of troubles, small and miscellaneous are troubles, and large and many are troubles, so Turner is not wrong, because compared to the delicate work of the barrel, the energy compression and conversion module is simpler, but the amount of work is relatively large.

Of course, Stan Lee also knew this, smiled faintly, raised his foot and kicked Turner, and scolded with a smile: "Don't pat the old man's ass, hurry up and get out of here, get out of here as soon as possible, I have other things to do." ”

Turner smiled, stopped talking nonsense, picked up what he needed from the pile of materials on the floor, and got to work.

This time, Turner's materials are much better than when he was in the dark star Bermuda, especially with the storage of the best material such as Tuban metal (star), which makes some materials that are not otherwise compatible with each other successfully fused, and the Tubertan metal (star) itself has the effect of increasing all aspects of the material, which makes the newly generated material more excellent in terms of strength and toughness.

In the case of Turner's Smasher, if he could have such a material, Turner would not even need to use the design of the spiral multi-empty barrel when making the Zuò Smasher, because the Smasher only reaches the highest energy level of 1000 energy, and the firing speed of no more than 5 times per second is concerned, with the pressure bearing capacity of this material, even a single barrel can withstand it.

But this time, the design doesn't work, according to Turner's design, this new sniper rifle, the minimum attack power is - 1800 energy level!

It's not so much a sniper rifle as a small- and medium-powered energy cannon!

Once again, the energy of this power was beyond the range that the material could bear, so Turner still decided to use the design of the spiral multi-empty barrel, but this time the problem was not solved so simply.

Because Turner has carried out too many energy compressions and shunts in the process of previous energy compression and conversion, in order to solve the situation that the energy is unstable after multiple compressions, and the energy after these shunts cannot be merged again, otherwise the energy will be unstable again.

So Turner needed to devise a solution to this problem on the basis of the spiral multi-empty barrel.

So, there was such a scene, Turner once again fully immersed himself, and with two more Buddha statues missing from the sculpture of the Hundred Buddha Banquet, Turner's required materials were smelted.

Then, very quickly, a full 16 empty barrels were born under Turner's hand, followed by an 8 empty barrels, and finally, 4 empty barrels.

Yes, you read that right, the barrel that Turner designed the zuò is not a single barrel, but a barrel with a full 4 muzzles!

As I said before, if the energy is compressed into a strand, it will still be unstable, and Turner has never thought of using any way to recompress this energy into a strand, and positioning the final muzzle 4 is just to make his next design easier to implement, otherwise, even if it is a direct 16 barrel, there is no problem!

After completing the entire barrel of the gun, Turner did not stop, but quickly put into the end, which is also the most delicate in the whole design, and this is the real muzzle of this gun.

Yes, this small module, which is very small and inconspicuous compared to the whole gun, is the final and important part of the whole design that determines the success or failure of this design.

Turner first made a hollow cover with the same material from which the barrel was made, just enough to fasten the small design he had left behind at the tail of the 4-muzzle barrel - this was the final muzzle.

Next, Turner took the remaining metal from the previous use to make the Zuò energy cartridge, polished it to the size he needed, and began to carve it.

That's right, this is also an energy box, but compared to the energy box to be used to give the energy bullet function, this energy box can be regarded as mini, because it needs to be installed in the muzzle position, and such a small part can't be made through a guò mold, and it can only be carefully carved like Turner.

The effect of the super brain is reflected again, Turner every time he carves, how deep he carves, what he carves, it is exactly the same as he expected, I have to say, if you only talk about accuracy, Turner is definitely the best sculptor in the world, because just like now, everything he carves is extremely accurate, which even the best sculptor can't do.

Soon, the part was formed under Turner's hand, and it was a boxy box-like part, with a small hole of the same size cut in each of the four sides of the part.

Then, there are 4 excitation devices smaller than rice grains, which are embedded in the 4 small holes, these excitation devices are the most important part of the whole part, and they are also the most important part of Turner's design, before making those barrels, including the small energy cartridge, Turner only took less than 1 hour, but just to make these 4 excitation devices, Turner used a full 1 and a half hours.

The stress trigger device, which is Turner's name for this small thing that is not as big as a grain of rice, is special in that it does not actively activate the device, but when it is stimulated by a certain kind of stimulus, it will automatically activate.

In the next step, Turner took a few materials and smelted them into another metal, which is the opposite of the metal used to make the energy box, which requires excellent energy conductivity, and at the same time can ensure that the energy does not escape in the process of conduction, but is very well attached to the metal, which belongs to the existing material and does not require too much effort.

The material was quickly smelted, then pressed into wires thinner than a human hair, glued to the four triggers, and connected in a square circle on the outer layer of the miniature energy cartridge

After these are completed, the whole design is more than half completed, and only the last two steps remain: first, a layer of topler plastic is also wrapped around the outside of the miniature energy cartridge to form a complete energy cartridge; Second, embed this energy cartridge into the muzzle lid that was made earlier.

Finally, hang this cover on the barrel of the 4 guns, snap it to the end, and you're done!

On the other hand, Stan Lee had already completed the energy conversion compression module, and had been quietly waiting to watch Turner operate.

Despite Turner's absolute confidence in his brain and hands, he still carefully and completely measured the barrel with a measuring tool, and after confirming that there was absolutely no problem, he finally breathed a sigh of relief, and all the parts were perfectly realized according to his design, and then it was up to the final synthesis effect!