Chapter 51 Valves of the glaze mill
On the weekend, Liu Zhikang personally led the team for the 5S cleaning and safety inspection, and a group of management personnel followed closely behind to score the health and safety of various departments in the factory.
In the first phase of the plain kiln, a motor leakage was found, a printing machine on the glaze line was covered with a glaze, the transmission motor between the first-line printing machines lacked a protective cover, the transmission motor behind the second-line oven lacked oil, and the filter screen of the dehumidifying fan of the glaze kiln was damaged. Then I went to the second phase with Liu Zhikang.
The glaze grinder of the second phase of the glaze mill is putting glaze on the glaze car under the No. 2 glaze slurry pool, when it is almost full, he goes to close the ball valve, left and right screwing there is no reaction, the glaze slurry is still flowing outward, and the glaze slurry in the glaze car also begins to slowly overflow, and the ground is white. The glaze grinder was in a hurry, and covered his hand directly to the vertical valve hole, he wanted to block the leaking glaze slurry, but the pressure in the pool was what he could withstand, he tore his throat and shouted: "Liu Chao, squad leader Liu, hurry up and help." ”
Liu Chao, who was not far away, was filling out the glaze slurry report, and suddenly heard the sound of crying for help in the glaze slurry pool, and ran over with a lightning flash.
Looking at the glaze grinder who was desperately covering the ball valve and the white glaze slurry flowing all over the ground, Liu Chao's eyes suddenly turned red, only to see him grit his teeth, take off his clothes, and throw them on the handle of the glaze car, and then saw him kick his feet left and right, and shake off the leather shoes on his feet. Then, he ran to the electric cabinet and turned off the stirring motor, grabbed a towel with his left hand, and held the iron ladder with his right hand, and staggered up. There is still a large half of the glaze in the glaze slurry pool more than two meters high, Liu Chao jumped down without thinking about it, he held the column of stirring blades with his left hand, took a deep breath, sank down, and blocked the valve with the towel in his hand.
Coincidentally, Liu Zhikang and his entourage arrived at the glaze mill, saw that the ground was embarrassed, and when they were about to get angry, the glaze grinder walked out of the glaze slurry pool, and there was glaze slurry between their hands and faces. After Liu Zhikang asked about the situation, he knew that the ball valve was broken, and he was about to say something, when a person covered in glaze slurry came down the stairs, if it weren't for the two eyes blinking and blinking, he might think it was a sculpture. The glaze grinder below said to Liu Zhikang that it was Liu Chao, the squad leader, who had just gone to the pool to plug the leak.
After Liu Zhikang heard this, he hurriedly asked the two to rinse with water.
The glaze grinder picked up the water pipe, opened the valve, and rushed the water towards Liu Chao, who closed his eyes and let him rinse it. After a while, a human figure appeared, and Liu Chao, who was naked, was stimulated by the cold water and shivered. Liu Zhikang couldn't bear to look at it anymore and retreated from the glaze mill.
Liu Chao and the ball miller hurriedly ran from the glaze mill to the bathhouse, and along the way, everyone looked at the two like monsters.
Next, Liu Zhikang inspected other places such as glaze lines, and also raised some existing problems, and asked relevant departments to rectify them in time.
Li Yuxin saw Lu Feng following Wang Zhong's buttocks, and the two were very close. Wang Zhong was carrying a spear, but Lu Feng was carrying a tool kit on his back, and entered the roller room one after the other, only hearing the sound of ping-pong, which was extremely unpleasant. Li Yuxin stepped forward, and it turned out to be disassembling a synchronous motor in the back cover box.
"Translator Wang, is this machine broken?" Li Yuxin stepped forward and asked.
"There is a problem with the synchronous motor, and I have already contacted Systm."
"Oh." Li Yuxin stood next to him by the way to see how they disassembled the motor.
Lu Feng looked disdainful, only caring about crackling and hitting with a hammer, while Wang Zhong carefully guarded the motor, afraid that he would accidentally fall down.
The two unloaded the motor and put it on the ground, Wang Zhong felt for a finger-long wire in the trunk, shorted the corresponding power supply, and then locked the rear door with a professional key. picked up the synchronous motor on the ground and walked out of the roller room with Lu Feng. Li Yuxin saw it clearly, memorized them one by one, and followed out of the room.
The glaze drenching device of the glaze line is running normally, that is, the cooling motor is a waste of water, Li Yuxin studied it carefully, and talked to the bigwigs of the equipment department about the ideas in their hearts, so several people decided to use circulating water instead, placed a stainless steel bucket next to it, and used a small air pump to directly introduce the water into the water-cooled motor, and then return the water from the motor outlet to the stainless steel barrel. As soon as the plan was decided, the equipment department began to work on the transformation.
The first phase of the glazing equipment cleaning program is also surprisingly smooth, after a long-term trial, it can maintain 20 days of non-stop cleaning. He Dehong's mouth couldn't close his smile, and this time the bonus was doubled. Since the second phase did not appoint a workshop director, He Dehong held the position of 3 workshops, and in addition to ensuring the normality of the first phase and the waist line workshop, he also had to take care of the work of the second phase. In the past, Li Yuxin was hanging in the waistline workshop, and he was relieved to delegate power, but after Li Yunfei went to the waistline workshop, he was not as self-motivated as Li Yunxin, he was only responsible for the process, and everything else didn't care. He Dehong has to go to the waistline workshop twice a day in the morning and evening, and he is afraid that this group of girls will be held back.