The old academicians each brought some light paint making materials from the warehouse, and since many of the equipment for making coatings had not yet arrived, they could only make them by hand.

Fortunately, it is not difficult to make it by hand, and if the five academicians work together, they can be made into experiments in a few hours.

Li Xinghe released several holographic drones, and the holographic drones recorded the whole production process, and the dosage of each step and each material was professionally measured to ensure accuracy.

Academician Ding Yaxin is responsible for the production of the varnish part, which is more complicated, the use of resin as the main film-forming substance plus solvent composition of the coating, because the coating and the coating film are transparent, sprayed on the surface of the object, after drying to form a smooth film, can show the original texture of the surface.

Academician Bai and Academician Huang are responsible for the production of the photovoltaic part, although this part is important, but it is not very difficult, and see that in the formula of light energy paint, although there are many materials in the photovoltaic part, the amount of each material is very small, and the production is relatively simple.

Academician Liu, Academician Li is responsible for the production of the circuit conversion part, the single-way one-way circuit temporarily used for testing does not need to be too complicated, the trouble is that multi-channel and multi-directional circuits are needed in the future, and it is very difficult to make without professional tools.

In the process of continuous trial and error, the academicians are also very united.

Seeing that the old academicians were busy, Li Xinghe was not idle, he wanted to make a carrier that could test light energy paint, and the earlier Iron Man model was a good choice, he immediately asked Weisha to design an Iron Man sculpture.

According to the video in the movie, Weisha designed a flexible Iron Man armor, which takes into account a lot of power consumption positions, which is convenient for consuming light energy and collecting and converting electrical energy.

In the Iron Man holographic model, Li Xinghe was inspired by the Statue of Liberty and posed for the Iron Man holographic model with a hand holding a hand-held fan, which was very funny, and he decided to make a model according to this.

Then he walked to Tongda Hardware, and Ladie and others, using the pressing equipment, quickly pressed out the corresponding accessories, at the edge of the two courtyards of Tongda Hardware and Internet Café, facing the beach, fixed assembly of an Iron Man armor image, due to the use of pressing equipment, the accessories are made relatively quickly, and the Iron Man armor is quickly assembled.

This is a one-to-one standing and raising Iron Man, which is quite similar to the action of Lady Liberty holding a torch, but the whole body is stainless steel silver, and it is already vivid when it is not painted, and if it is colored, it is simply the same as the real one.

However, Li Xinghe didn't plan to color, this Iron Man was used for light energy paint experiments, and now he is only waiting for the light energy paint to be painted, and then tested.

Academician Ding Yaxin spent more than two minutes to make a bucket of varnish, in the process of Academician Ding Yaxin found that there are many unreasonable materials in the formula of light paint, but he has not made improvements now, because the first production, first make the original, and then improve according to their own ideas!

Academician Bai and Academician Huang also spent about the same time using photovoltaic silicon materials and various elements to make powder of light energy paint, and the finished product was only a few dozen grams of powder.

As for the circuit conversion part, it is the most difficult part, after all, Tongalu is a small country, many accessories are not complete, it is very difficult to design the circuit converter according to the design drawing on the formula, for this Academician Liu, Academician Li dismantled a lot of waste electrical appliances, only to come up with a simple circuit converter, because there is no power storage part, can only be directly connected to the electrical appliances to directly consume electricity.

Finally, according to Weisha's guidance, Ding Yaxin proportionally varnish and powder blending, there is no professional mixing equipment, the three old academicians can only take turns to hand mix, tired and sweaty, if it is not for the body by Zhenyuan tea conditioning, they really don't have such energy, and after mixing evenly, the light energy paint will be made, there are more than half a 1L paint bucket.

I saw that the light energy paint in the paint bucket showed a clear form, and it did not change its shape at all because of the photovoltaic powder.

After Academician Ding Yaxin saw the finished product, he instantly understood the principle of using those unreasonable materials in the production process, and it can be said that if there are no materials, then the production must not be called light energy paint.

He was satisfied with a test tube with a test tube of light energy paint, looking at the crystal clear finished product, very satisfied, through the test tube, he suddenly found that not far away stunned Qing, this kid usually experiments are above board, today it is obvious that he is timid, either with a chair, or with his body, he feels something greasy.

Ding Yaxin was about to go over to see what the stunned Qing was doing, but at this time, Li Xinghe walked into the laboratory, and Ding Yaxin could only give up looking for the stunned Qing for the time being.

Li Xinghe picked up the paint bucket and looked at the clear light energy paint, it was done, he was very happy, if he did it alone, he wouldn't be able to do it in a few days and nights, and it would be good to have a team.

It's just that he took a look at the simple circuit converter that was made, it was really rough, it was not about technology, it was just the reason for the condition of the tool, and it was better to place an order directly with the electronics factory in Huaxia in the future.

Li Xinghe picked up the paint, picked up the simple circuit converter, installed the simple circuit converter on Iron Man's raised hand, and then connected a small handheld electric fan to it to consume electricity, and then began to paint the light energy paint.

Since Academician Ding Yaxin insisted on painting himself, Li Xinghe let him spray enough.

Academician Ding Yaxin is also very professional, presumably he used to do this often, he connected the electric spray gun, sprayed it very evenly, the skill is very home, and there will be signs of oil leakage if it is not sprayed too heavy.

After waiting for more than ten minutes, after the paint dried, the sun was shining, and the fan had begun to have electric energy input and could be turned.

This is really amazing, a layer of paint can drive the fan, everyone present showed a happy look on their faces, especially a few academicians who made it by hand, the joy of success is indescribable.

However, according to Weisha's suggestion, one layer is too thin, and it is recommended to spray three layers to ensure the maximum use of light energy, so Academician Ding Yaxin sprayed it twice again, and after three times, this Iron Man armor is already as smooth as a mirror.

During this period, before the sun goes down, this handheld fan is spinning faster and faster.

After the sun went down, the hand-held fan still didn't stop, but it was much slower, because the light paint was still absorbing the light energy from the yard headlights to generate electricity.

All the academicians were smiling happily, and they couldn't imagine that they could successfully make light energy paint at one time, giving them a feeling that the sword was not old.

However, everyone has recorded the shortcomings that need to be improved in this experiment, and they are ready to improve it next time.

~