Chapter 112 Fabrication of Ground Source Heat Pumps

The new storage space brought about by the upgrade of the storage room did not increase much, but only expanded the pantry by five square meters.

However, this is still much more spacious than the original ten square meters of space for both food and materials, at least Chen Xin does not have to face the materials all over the ground and has nowhere to stay.

Especially the extra shelves on the wall, after putting the steel bars and some small parts on the floor, the floor of the storage room can be said to be much cleaner, except for cement, there is nothing to put on the ground.

In this way, a lot of space is freed up.

At least Chen Xin could drag the two air conditioners piled up next to the workbench into the material storage room, instead of piling them up there to get in the way.

After dragging the two air conditioners into the storage room, Chen Xin returned to the workbench and opened the system interface again.

In addition to manufacturing various equipment and processing various parts with the help of the system, the workbench produced by the system can also be used to disassemble various things.

Of course, this is a function of the workbench itself, but with the power of the system, Chen Xin can make the dismantling work easier and recycle resources more efficiently.

For example, when he is sitting in front of his workbench now, he can see the two air conditioners that have been stuffed into the storage room on the system interface, and show that they are dismantling and recyclable.

Obviously, under the power of the system, Chen Xin can already sit in front of the workbench and directly disassemble the things in the storage room.

Looking at the air conditioner unit displayed as detachable, Chen Xin only hesitated slightly, then ordered the disassembly and disassembled one of them into parts.

The parts do not appear on the workbench, but remain in the storage room.

However, Chen Xin, who had finished dismantling, was still very curious and came to the storage room again, wanting to see what was left of the air conditioner after the system was disassembled.

At this time, in the storage room, there was one less air conditioner that was originally stacked by Chen Xin against the wall, and there were many more disassembled parts in the originally vacant position on the shelf next to it.

Chen Xin walked to the shelf and picked up the disassembled parts, and identified the compressor, which was one of the most important parts of the air conditioner.

This is also a necessary part for Chen Xin to manufacture ground source heat pump equipment, although there is a system to help Chen Xin to build a ground source heat pump, but these parts can not be made because of the insufficient grade of the workbench.

Faced with this kind of setting, which seems to be that some parts in the game cannot be made, and can only be obtained by collecting them in the wild or doing tasks, Chen Xin is not surprised.

In the case of ready-made parts, through the transformation of pipelines and the splicing of parts, it is not difficult to build a usable ground source heat pump equipment, and even as long as there is no problem with the parts, even without the help of the system, Chen Xin can assemble the ground source heat pump equipment.

However, with only those tools on the current workbench, it is impossible to build your own compressor.

Although the compressor used in the air conditioner looks like two long canisters connected together, one large and one small, the structure inside is quite complicated.

Before Chen Xin became a full-time writer and started writing online novels, he also did other jobs, and he was also exposed to mechanical manufacturing because of his work.

He clearly knows that the manufacture of a compressor cannot be done by a manual workshop, and even if the compressor is disassembled and handed over to him, he may not be able to put all the parts back in their original condition.

In other words, even if it can be installed back, Chen Xin is not sure whether this compressor can still be used.

Because the compressor is in a high-pressure state when it is working, in this case, even if there is only a trace of leakage or the assembly is not in place, it may turn the compressor into a bomb, causing serious consequences.

Therefore, the manufacturing and processing of this kind of thing requires real industrial-level processing and manufacturing capabilities, not garage workshops.

Chen Xin didn't really care about this situation, his demand for this kind of equipment parts was not high, and the materials that the SWAT team could provide were enough to meet his needs.

And with the system, if he can't get it, Chen Xin can also continuously upgrade the workbench and workshop, so that it can finally produce the parts and equipment he needs.

Chen Xin, who had no intention of working, looked at the disassembled parts, and somehow became interested, and returned to the workbench, intending to manufacture the first ground source heat pump.

Ground source heat pump equipment does not have system drawings to refer to like the firearm drawings on the workbench of the weapons cabinet, and it can be operated fool-proofing with the powerful functions of the system.

The ground source heat pump equipment without drawings and references needs to be assembled by Chen Xin himself little by little, and all the system can provide is some assistance.

Just like Chen Xin's previous oxygen concentrator, the system can help him process materials and improve the accuracy and quality of parts, but it cannot replace him directly processing materials into parts.

However, this is not difficult for Chen Xin, although the structure of the ground source heat pump system is somewhat complicated, but there are relevant structural flow charts and general circuit diagrams on Chen Xin's notebook, and Chen Xin is still able to assemble the entire equipment according to the drawings.

It's just that although it can be installed, the things assembled by Chen Xin are still rough.

And there is one thing that Chen Xin did not think of before, that is, the refrigerant used in the data he saw is usually water, unlike the chemical refrigerant used in household air conditioners.

Water is the medium with the highest latent heat of evaporation in nature, and the heat carried from liquid to gaseous state is also the largest, but for small household air conditioners, it is not suitable to use water as a cooling circulation medium.

The refrigerants used in household air conditioners are chemical media that are small in size, fast in effect, and can be vaporized and condensed at room temperature.

As for the use of water as the cooling circulation medium of air conditioning is not unavailable, large central air conditioning or similar to ground source heat pumps such as the need to cool the circulation medium to carry more heat, the advantages of water are reflected.

This is actually like the difference between a small truck and a large truck, the small truck pulls less, but it is fast and flexible, and it is suitable for small-scale use; The large truck pulls more, but the volume is large and the speed is slow, which is suitable for large-scale use.

However, now Chen Xin did not consider directly replacing the residual cooling medium in these equipment with water, but assembled the equipment first.

After all, this is only the external unit of the household central air conditioner, and the cooling circulation medium used in it is still a chemical medium, which leads to its circulation pipe is actually very small, and the evaporator and condenser are also designed for the chemical medium, not suitable for water.

If it weren't for the system, Chen Xin wouldn't have been able to do it even if he wanted to, but with the system, it wouldn't be too troublesome to modify the cooling circulating medium.