Chapter 138: Assembly Completed (Last Recommendation Before Putting It on the Shelf)

After the day's test, Li Yan did not leave the base, but called the engineers in charge of the cockpit assembly, and everyone continued to discuss a feasible assembly plan.

Although in the drawings, Chen Shen has marked out the various positions of the cockpit and what equipment to be placed, but with so many equipment, instruments and lines, they still have to consider how to lay out, what to install first, and what to install later to achieve the best effect.

In addition, there are some parts that are difficult to install, such as the zoom telescope in the observation window of the head of the red storm!

In the deep sea, glass is very fragile, once there is a small scratch on the surface of the glass, it may become a breakthrough of huge water pressure, which leads to the glass lens from the production to the installation of the whole process can not be in contact with any hard objects, even nails.

Moreover, the fit between the viewing window and the glass needs to be very tight, and the gap between the two should not exceed 0.2 filaments, that is, 0.002 mm.

These basic experiences are all information obtained from the previous Qianlong project, and Li Yan also found the Qianlong project and got more detailed information.

Although in Chen Shen's drawings, the installation requirements do not need to be so high because of the special glass material, Li Yan still habitually does it with the highest standards.

Li Yan and his engineers looked at the first-hand engineering information given by the Qianlong and discussed the installation plan, and a feasible plan gradually took shape.

There are some other parts with high installation difficulty, all of which he has found similar reference cases in China, which provides feasible support for the assembly plan.

Li Yan has lamented more than once that if there were no such cases, it would definitely take a lot of time for them to solve these problems.

After Chen Shen learned the news, he couldn't help but express the same emotion as Li Yan, without the support of different projects in various fields in China, this project really couldn't go so fast.

The Crimson Tempest's launch platform comes from space, part of the assembly process comes from deep submersibles, the vector engine relies on the aviation industry, as well as the processing of armor and mechanical parts......

This is completely a kid who grew up eating 100 family meals!

Of course, these fields have made such a great effort, and the technology of Crimson Storm will also be fed back into these fields in the future.

With the current super-large launch platform foundation, the future launch platform design in the aerospace field can save a lot of effort.

In the future, the deep-sea submersible or submarine can use the sealing technology on the Crimson Tempest, as well as the processing technology of deep-sea pressure-resistant titanium alloy.

Storm series vector engine, if the magic reform is successful, the country may add a vector engine with terrifying thrust......

Not to mention the field of damping and damping, which is a technology that can be used in many fields.

As for the civilian field, the technology on the Crimson Storm will not be opened in a short period of time, one is the need for secrecy, and the other is that the scientific researchers themselves have not yet thoroughly understood the technology, so why talk about transforming the technology into the civilian field?

Chen Shen didn't want to do this kind of tiring work.

But the benefits of these scientific research or defense fields alone are considerable.

The Crimson Storm Arm didn't take much time, one right arm had already been assembled, now it only needed to be disassembled, divided into two parts, the upper arm and the lower arm, and then assembled.

The other right arm is also very fast after having previous assembly experience.

As for the remaining left arm, it was more relaxed.

Originally, the left arm was a plasma cannon, but the plasma cannon had already been built and sent into the mountains, so it was naturally impossible to build another one and install it on the left arm.

So Chen Shen had already modified his left arm on the drawings before.

Although the exterior shape and other sealing designs have not changed, the inside of the small arm has been turned into a fuel tank.

The left arm will be used as the mech's secondary fuel tank in the future, increasing the mech's endurance.

With the addition of this drop tank, it is expected that the Crimson Tempest will be able to operate at full power for about eight hours.

This kind of transformation reduces the difficulty of assembly, and if it is still a plasma cannon, the various high-precision instruments in it are not so easy to assemble.

After installing the left and right arms, all that remains is the cockpit and the two large oil tanks at the back.

The first to be installed were two large oil tanks, and before these two units were installed, the mech's back armor could not be installed, and the three vector engines underneath were now only barely exposed.

Two large tanks, like kettle liners, were hoisted high, and all movable aerial platforms were in use, and technicians stood on them, reporting the status of the hoisting with walkie-talkies.

After the correct positioning, they manipulated the aerial platform to approach, tied the safety rope and began to secure the tank storage tank.

From below, the construction workers look like ants climbing on a giant.

However, the power of these "ants" is shocking, and I don't know how many times they have created one miracle after another.

After the tank was installed, other small parts needed to be installed, and the last thing to install was the red titanium alloy armor on the surface of the tank.

After the armor of the tank was installed, the matter did not end there.

It also requires a large piece of dorsal armor underneath, as well as two triangular shoulder blades on the left and right sides to keep the mech balanced.

However, it only took three days to install these devices, during which Chen Shen was watching from the side, and the speed was amazing.

By the time these two devices were installed, Crimson Tempest was over 90% complete, with only one cockpit missing.

"It's almost over there in the cockpit, let's go check it out." Li Yan waited until the assembly was completed in the warehouse, and said to Chen Shen.

Naturally, we have to take a look.

Chen Shen and Li Yan went to the assembly area together, and now the assembly of the cockpit has begun.

The plan that Li Yan and the others negotiated before was to disperse assembly in the air.

The bottom of the cockpit was mounted to gain a foothold, then the four-sided frame and other devices in the cabin were mounted to the bottom, and finally the most delicate zoom telescope section was installed.

The advantage of this is that it can be assembled and applied at the same time.

At the bottom of the cockpit is a special offsetting piston device that greatly increases the flexibility of the neck connection, allowing the mech to turn its head almost as fast as a human.

Once the massive piston unit and the four-sided frame were installed, many of the internal units were transferred to it via an aerial platform or crane for installation by technicians.

In the assembly area on the ground, there are still a large number of technicians who are assembling the remaining equipment in the cabin according to the assembly plan, and each piece is assembled, it will be immediately sent to the mecha for installation.

The most complicated cockpit was moved to a height of seventy-two meters little by little with this stupid method of ant moving.

The final assembly took place late at night, and the inside of the base was still brightly lit.

Even though Chen Shen and Li Yan were sleepy, they still stood on the overpass at the edge of the wall, staring at the construction situation opposite.

There was barely a sound to be heard at the scene, and everyone held their breath and looked ahead.

The robotic arm carefully docked with the cockpit with the observation window, and under the precise positioning of the instrument, the docking on both sides did not make the slightest mistake and docked together perfectly.

Whoa!

At the moment when the docking was completed, the overpass and the aerial platform were ...... There were bursts of enthusiastic applause at the scene, and the people who were still struggling here held back the joy in their hearts and kept applauding.

Even Li Yan, who has always been steady, couldn't help but hug Chen Shen's shoulders and shook Chen Shen: "It's done!" ”

Chen Shen smiled happily and sighed with emotion.

The fact that the project was completed so quickly was a surprise to even him.

After the successful docking, many technicians pressed their excitement and hurriedly took the machinery and equipment into the cabin to fix the observation window that had just been installed.

It wasn't until they fixed the observation window that the Crimson Storm was truly complete.

Chen Shen walked onto the aerial platform, controlled the movement to the front of the Crimson Storm, and looked at this world's first large mecha, and possibly the last large mecha, and couldn't help but sigh with emotion.

Although it has a huge body, its burly and majestic torso and legs, as well as its slender and powerful three arms, can make people feel deadly, and it must be an agile killer!

"Tomorrow the whole machine will be inspected, and a week later, the first test will be carried out."