Inside the container, three pieces of equipment of different sizes were revealed.

After Xiao Wu completed the task, when he saw him stretch out his palm, he jumped up from the ground and landed in Sun Cheng's palm.

Smiling slightly, Sun Cheng put it back in his pocket and looked at the three devices in front of him that had been revealed from the container.

The three pieces of equipment in the container were also brought back from another world, and the two pieces of equipment of the same size on the left looked like they were nearly three meters tall and six or seven meters long, and they were two Tinscan extreme ultraviolet lithography (EUVL) production platforms that had been modified by the Decepticon sappers.

This is a 22nm lithography equipment manufactured by ASML, a Dutch semiconductor equipment manufacturer, and it is also the most advanced lithography machine that Sun Cheng can buy in another world.

After the transformation of the Decepticon engineers, it is now able to provide 14 nanometer precision line width and spacing, and the nano-level direct writing efficiency of semiconductors is far improved by nearly 170% compared with the original equipment, which can be called a high-precision semiconductor equipment like a magic weapon in the country.

However, if you compare the two of them with the third device on the right, which is almost a circle larger than them combined, the two Tinscan platforms that the sappers have modified will not be on the table.

"Ring three-dimensional making machine!"

Suddenly spit out these in his mouth, Sun Cheng slowly walked to the device, stretched out his hand and touched the device in front of him, his eyes flashing.

The name of the device is 'Ring Machine', but he prefers to refer to it as a '3D printer'.

Because the equipment in front of Sun Cheng was designed by the sappers of the Decepticons at his request, and the equipment was made to facilitate Sun Cheng's large-scale production of some high-tech products in reality.

Although the 3D printer in front of him is far inferior in performance to the equipment used to make robots in his second base, it is by no means comparable to the so-called 3D printing equipment designed by humans on the earth.

How to say, the gap between the two, just like the concept of straw paper and the finished product, the technical generation difference in it will never be less than two or three generations.

"This is a real treasure......

Touching the finger of the 3D printer in front of him, he involuntarily trembled slightly, and Sun Cheng's face was full of excitement.

These three machines were specially brought by him from another world for his own layout in reality.

Next to it, the two Tinscan platforms, which have been upgraded to the 14nm level, are not the most advanced lithography machines that can be bought in every country even in the real world, and the benefits are huge for his strategy of starting with semiconductor memory.

According to Sun Cheng's understanding, ASML not only banned sales to China in the world of [Transformers].

In his world, this Dutch company has been controlled by well-known semiconductor giants in Europe and the United States such as Intel, Western Digital, and Micron Technology more than ten years ago.

In recent years, ASML has produced the highest specification 14nm lithography machine, which is also not sold to other semiconductor companies other than Intel, Western Digital, and Micron Technology, and there is a clear difference between European, American and Asian companies.

Dozens of semiconductor companies in China can only buy 22-nanometer lithography equipment from ASML at most, and the price is more than 30% more expensive than that of European and American companies.

And the other 3D printer, it is even more useful.

It only needs to input the product design, data and information to be produced in its central processor, and at the same time provide sufficient raw materials, and it has hundreds of robotic arms inside it can automatically manufacture thousands of products from firearms to electronic equipment and even high-precision products, and it is very efficient to manufacture.

According to Sun Cheng's test in another world, under full operation, it can manufacture 36 1T hard disks at the same time in 1,784 seconds, and a hard disk can be manufactured almost every 478 seconds, which is only stronger than Seagate's investment of $700 million in Ohio, USA, which is claimed to be the fastest efficiency of the semi-automatic hard disk production line.

If you replace it with a simpler structure such as a firearm, the efficiency of this 3D printer can be even higher.

Defending the 3D printer, he leaned forward and came to the 3D printer, looking at it intently.

It seemed to have some interest in the device, but quickly withdrew its gaze and quietly guarded Sun Cheng's side.

Sun Cheng didn't care about it, just stood quietly in front of the 3D printer, touching the cold outer wall of the device.

It took a while before he retracted his gaze.

It would be too wasteful to use this artifact in the manufacture of semiconductor memory, such as hard disks and other semiconductor memory, and some of the machines and equipment produced in this world can also be produced.

For this 3D printer, it is the right thing to do to make more sophisticated devices such as robots.

However, before the production line problem is solved in reality, it can at least save him a lot of time by temporarily producing hard drives for [Cybertron Technologies].

“…… It's time for the humans of this world to learn the manufacturing technology of Cybertron! ”

The palm of his hand rubbed reluctantly on the device for a while, and then Sun Cheng slowly withdrew his fingers and made this decision secretly in his heart.

And the [Cybertron Technologies] he founded in the real world is also time to make a move!

……

A few days are fleeting.

After the boss Sun Cheng personally gave instructions, Wang Lu and they were like clockwork, with sufficient financial support, in just a few days, they recruited twenty or thirty technical backbones who had worked in the industry for many years, Cybertron Technology Company, which has no reputation in the industry, finally began to move!

"Ready to upload our products!"

Based on several different versions of the cloud disk client of mobile apps such as computers and mobile phones, after the completion of the report of the Ministry of Computer Industry, it has been tested for more than a month, and the vulnerabilities have been detected continuously and continuously modified, and the client has been identified as having no major problems, and uploaded to many Internet platforms and mobile malls.

What no one knows is that after waiting for the review to pass, a product that is about to cause a huge sensation in the world is about to meet the world.

ps：

Yesterday's two watches broke their promises, and today the whole family is here, and I am very happy.

I've drunk a lot of wine and I'm still dizzy now, but from half past six to now, the two chapters are finally finished, and I'll send them together!

Go to sleep, I wish you all a happy Mid-Autumn Festival.