In the thirteenth laboratory, Gu Yili continued to refresh the data of the white armor, and then Gu Yili heard a small sound, and then she stopped the operation of the armor.

It is clear that this is the limit of what the armor can bear, and it is the limit that a driver like Gouly can reach.

There are several pilots like Gu Yili, but their skills are not as good as Gu Yili, although they can also exert the white armor to the limit, but they are not faster than Gu Yili.

The strengthening of the white armor requires a lot of data to complete, and it is not easy for only Gu Yili to complete this job alone, so more people must be involved in this matter.

Stopping the white armor, Gu Yili jumped out of the cockpit, and then saw a group of people with instruments enter the thirteenth laboratory to conduct a detailed examination of the white armor.

After examination, it was found that the hand connection of the white armor was broken, which was not a noteworthy phenomenon for the people in the equipment department.

Because this white armor is spelled out, the materials used are new and old, and the place where the break occurs is also the place where the old material is used.

Assembling an armor from old and new materials is also one of the experiments of the armament department, and in order to be able to test the data of various materials, this experiment is dangerous, but it must also be carried out.

In order to develop an armor, a lot of experimental data is required. It's not that you can make the best armor with the best materials, but the design of the armor involves the combination of many materials.

Although the White Armor is said to be a prototype of the orange core, it is also a prototype with various materials for the development of various armor models.

After Gu Yili came out, she took a bath directly to herself, and there was no ventilation system installed in this prototype white armor, so it was very hot inside! Even if the armor is not completely enclosed with armor plates, this is impermeable.

After taking a shower to refresh himself, he deliberately returned to Laboratory 13, and the staff also had a rough calculation of Bai Kai's various data just now.

"The combination of tungsten gold and white snail gold is really not suitable, in addition to the fracture of the arm, the damage to each joint is also very large.

I suggest that it is better to use Gong blue gold and white snail gold, the ratio is thirty-six and sixty-four! I've calculated this ratio many times, and there shouldn't be any problem. ”

"There is indeed no problem with the combination you said, but the combination of Gong Blue Gold and White Snail Gold is not suitable for energy conduction, or the combination of Spiral Gold and Tungsten Gejin is better!"

As soon as Gu Yili entered, she heard several staff members discussing the design of the armor, but she didn't understand the materials, so she didn't speak, but found a place to sit down and drink milk and rest.

When Gu Yili finished drinking a can of milk, the staff finally saw her, and then pulled Gu Yili over to discuss the issue together.

"General Gu, tell me what kind of material is the best?"

General Gu? This is indeed not wrong, Gu Yili is the first person in armor, and this position is naturally very high.

Although it is said that Gu Yili usually carries out missions with the team, in large battles, Gu Yili is indeed the general who commands the armored team.

Although Gu Yili was not used to the title of general, her heart was very dark when she heard this.

After a little refreshment, Gu Yili said: "When I was driving the white armor just now, I felt that there was no problem with the flexibility of the joints, but once I used force, the joints felt a little loose.

I also saw the crack just now, even if the material is aged, there will not be a crack as long as 30 cm, so I think it is better to use a tougher material to make the joints! ”

There is no way to avoid the aging of materials, and it is impossible to produce armor only the materials that assemble the armor, and there are many spare materials to be manufactured.

When these spare materials are not used, they will have some changes due to long-term non-use, which is called material aging.

Generally, aging materials can not be used at all, because the use of aging materials is very dangerous, and aging materials do not have a long service age, once the situation of vigorous use occurs, the material must be replaced immediately.

The use of aging materials in the experiment of the equipment department is also a helpless move, because there are some materials that cannot be rebuilt at all, so they can only be used to test the resistance of the armor.

These aging materials are also used to evaluate the service life of other armor, because no matter how powerful these armors are, they will be discarded after the end of their useful life.

So it's better to rebuild the armor before it's scrapped, so the aging materials are a measurement tool for the materials that are being used.

In fact, the materials being used are attached to the runes, so this service life may be biased, but there are some materials that have no affinity for runes, so the service life of these materials can be confirmed.

For those who develop armor, the most annoying part of the year is to conduct a security audit of all armor, and that is when they are busiest.

However, these things can also be handed over to the armor divisions for a preliminary review, because a set of test tools with runes will be issued during the review, and with these test tools, even the armor division can conduct the preliminary review on its own.

Generally speaking, there are two processes for a security audit, one preliminary review and one review.

The safety review is to replace these armor with new parts, of course, the new parts are newly manufactured, so there is no need to worry about replacing them with aging parts.

Of course, because the parts need to be newly manufactured, the review time will naturally be relatively long. However, because of the addition of Latty, this time is much shorter than before!

In Ratty's database there is a design drawing of a material processing workshop, and with this material processing workshop, the processing time for various materials will be much shorter!

And the workshop can be fully automated, so you don't have to worry about the long time it takes to make materials. As long as there is a prototype part in it, then the prototype part can be used to manufacture the same part according to the requirements.

Of course, the materials used to make the parts need to be set in advance, otherwise the workshop would not work.

Gu Yili's opinion is very important to the staff, because Gu Yili is the only one who can use all kinds of armor proficiently in the Alliance, and even George does not have this ability.

However, speaking of George, he has a certain talent for flying armor, and among the test results of various armors, George's control of flying armor is the best.

After getting Gu Yili's opinion, the staff began to discuss what kind of material would be used to make parts with better toughness.

But at this time, Ratty sent them a message saying that a batch of very rare materials had been discovered in large quantities, and that it was hoped that the staff of Laboratory 13 would be able to use this batch of materials for armor manufacturing.

This message naturally brought their discussion to an abrupt end, and then Gu Yili turned and left the laboratory. It's not like this has never happened, and the matter of testing the parts made of materials has nothing to do with Gu Yili, so she might as well leave directly and wait for the next equipment department to find her.

And this news is mixed news for the staff, the joy is that they can use those materials found relatively little to make armor, and the worry is that they just want to calculate the best combination of materials and don't know how much time it will take?

Even with Latty calculating, this time will be very long! It takes at least three days to calculate the mix and proportion of all the materials!

Xin Hao's part of the database is stored separately, and it will soon be possible to retrieve various information on the materials collected by the Alliance.

There is also information on special materials in this database, and there are all kinds of materials that will be more powerful when paired with them.

It's just that the so-called new materials have nothing to do with Xie special materials, and these new materials are less than special materials, so the relevant data is also very small.

The calculation of collocation is to calculate the possibility of collocation between these materials through latty, not to actually experiment with these material combinations, and because of this, there is still a gap between this calculation and reality.

Therefore, at this time, it is necessary to conduct physical experiments and use physical objects to verify the calculations. The combination that has been verified is the one that will be used to make the armor later, but it will also be replaced.

First of all, they will make ten armor parts, and then let Gu Yili and them test it to see how it works.

As long as the actual effect is approved by more than half of the people, then the new part can be used.

Once new parts are put into service, the armor naturally needs to be replaced.

How much armor does the Union have? Naturally, the general public does not know, they don't even know the various models of armor, how can they know how many armor units there are?

There are a total of 100,000 units of armor owned by the Alliance, regardless of category, and there are 80,000 units in service, so it can be said that the Alliance still has 20,000 units of armor in a state of idleness.

However, these idle armors have also been carefully maintained, and unlike those parts that are not needed for the time being, these 20,000 armor units must be kept in a state that can be put into immediate use at all times.

There are two types of armor being developed by the Alliance, both of which are the types of armor mentioned earlier, one is the combined armor, which uses multiple different functions through the combination of multiple armors.

The other is armor with accessories, which can be adapted to various terrains and battles by directly assembling various accessories.

Of course, the most difficult thing to wait for me is the armor accessories, because one of the main problems is the placement of the armor accessories.

These armor accessories can't always be hung on the armor! How much energy does that consume? Even the use of the "Sun" may not be able to support such armor for a long time.

And what about using separate space for these armors to house accessories? That's a good idea, but it's not technically possible!

It's not that magic and Taoism can't be done with technology, but the current technology can't do it!

The runes engraved on the armor are to enhance the performance of the armor, and it is precisely because the armor has been magically modified that the combat effectiveness of these armors can meet the current combat needs.

The use of independent space requires the use of rune technology, the runes originally engraved on the armor are very full, and the depiction of each rune is exquisite, where to depict what rune, how big the rune is depicted, these are all carefully calculated, not a setting that can be changed at will.

In other words, it is unrealistic to carve runes that form an independent space on the armor, and the alliance has not yet reached this level of creating an independent space in terms of technology, so this scheme is naturally not enabled.

So someone put forward another plan, this plan is a little more realistic than using independent space summoning accessories, but it consumes more resources, even Ann is hesitant to implement this plan.

This scheme is actually simpler, just make a large base to place accessories and follow the armor, and when the battle is fought, this base will launch accessories for armor replacement, and the replaced armor will also be taken back by the base, so that there is no fear of waste.

It's just that it's not easy to build such a base, and it takes a long time! Even building a base car is much easier than building this base!

However, it is not impossible to build such a base, and since this plan has been proposed, it is necessary to make a sample and try it out.

This is not a big project like Yunshan City, and every step needs to be carefully calculated before manufacturing. This base is about the same size as the Sanwang armor, in addition to the accessories for the armor, there are also people to control it, and it is best to control this base as an armor, but it is just an armor controlled by multiple people.

Because the plan was proposed a long time ago, the armor of this base is also being manufactured intermittently, and it has been completely manufactured by now.

And George was in charge of the testing of the armor of this base, after all, all the things about the armor could not be done by Gu Yili alone.

And it also takes a lot of people to test the armor of this base, but it doesn't need many armored divisions, as long as there is only one person in the armored division, and the rest of the people are enough as long as they can activate the armor of this base.

The accessories of the armor also need a certain distance to be accurately assembled, which is also a matter of no way, if the distance is too far, you need to let the armor manually install these accessories.

——————————————————————

"Is the base armored! It's really a fresh design, I hope it doesn't go back to the furnace like before! —Gouley