In Luo Jia's magical brain like a hard disk, the blueprints of the robot are ready-made and can be used directly.

The main difficulty lies in the compatibility of parts, after all, the parts used in the design of extraterrestrial civilizations and the parts that Luo Jia can buy from the earth, regardless of shape and power, there must be a huge difference.

The key is to learn the design ideas of extraterrestrial civilizations, and the height of thought will determine the height of the product.

In this regard, Luo Jia undoubtedly occupies a huge advantage, even if all the roboticists in the world are combined, they are far less than the folders in Luo Jia's head.

As for the parts, it's all tears.

The most important components of the robot are the harmonic geared motor and the RV geared motor.

Harmonic motors have low power and are used to drive small devices such as eyes and knuckles.

RV motors have powerful horsepower to drive large equipment such as robot walking.

At present, the main player of these two types of motors in the world is a company from Neon Country.

There is a spinea company in Germany, and the quality of the RV motors produced is good, but the sales have been so-so, and the complete competition is not as good as the neon peers.

Neon Nation Teiren, Hamanaco, Sumitomo and several other giant companies have almost completely monopolized the reducer market.

There are more than 200 domestic reducer manufacturers, and the more powerful companies include, Green, Laifu, Benrun, Han's, Xintuo, Kangzhen, Qinchuan, Shuanghuan, Hengfengtai, Zhongda and so on.

But what is desperate is that these domestic manufacturers are all imitating the design of the neon company, heat, noise, service life, and in these important technical indicators, they are far behind the giants of the neon country.

So Luo Jia has no choice at all, harmonic deceleration can only use Harmony, RV deceleration can only use Teijin, as for other parts, there is basically no domestic one.

I have to say that in the high-precision machinery industry, my country has a long way to go, and the accuracy of Teijin reducer can even be achieved at the micron level, and the strength is quite terrifying.

When Luo Jia was ready to invest in the robot industry, he spent a lot of time doing pre-research, and most of the blueprint had been completed.

He now spent another night finalizing the plan, and then asked Li Moran to take himself to the local high-precision processing factory in Wuxi.

As a mechanical and electrical industry base city, Wuxi has a lot of factories in this area, but most of them do not meet Luo Jia's requirements, in order to ensure quality, Luo Jia's requirements are very demanding.

Eventually, they found a company called Taidong Precision.

The owner of the factory is an uncle in his fifties, named Pang Yunhai, a mechanical engineer from a state-owned enterprise, who went to the sea to do business 20 years ago, specializing in precision parts processing.

Pang Yunhai excitedly led Luo Jia and Li Moran to the two huge five-axis CNC machining centers, "You must have never seen this, right?" DMG CTX2000, and DMG CTX 4000, a huge German product, complete the knife magazine, almost 18 million. ”

"In this place of Uxi, I want to say that I am ranked second, no one dares to say that I am ranked first, no matter how complex the parts you want, I can get them for you, but the price is not cheap, after all, I use high-end German goods."

Luo Jia shrugged his shoulders, "The accuracy of DMG's CNC machining center is top-notch, but their largest shareholder is Neon Guosen Seiki, and the technical aspect has always been in cooperation with Neon State." ”

Pang Yunhai didn't expect that Luo Jia, a guy who looks young and was born in computer science, still understands machinery?

DMG's major shareholder is indeed Neon Country, Pang Yunhai has not less boasted to others that his machine tools are pure German goods, only Luo Jia knows that these two machine tools are actually a mixture of Germany and Neon Country.

Luo Jia continued, "Although I don't have any feelings for neon country, in the field of high-precision CNC machine tools, Germany has actually lagged behind neon, and even Swiss-made non-standard machine tools are more accurate than German goods." ”

"The American man-made F22 uses neon SNK five-axis dragon boring and milling, and Boeing's main supplier is Yamazaki Mazak, the world's highest precision machine in the field of ultra-precision machining, which is JTEKT, which is specially used to make lenses, and the accuracy is eight times higher than that of the three major military artifacts."

"In addition, there are also Amada, Otsu, Makino, Komatsu, Aida, Mitsubishi, Sodick, Citizen, Fujikoshi, Fuji, Toshiba, Brothers, Tsugami, Tatsuzawa, Tosu, Okamoto, Miyano, Hosco, Speed Skills, Nakamura Ru, Mitsui Seiki, Toyokazu, Matsuura, Takamatsu, Fanuc, Ikegai, and a series of other giants in the field of machine tools."

"Such a strong lineup, not only can not be compared with our country, even the Germans should be amazed, it is also a late-developing country in East Asia, and the neon country is really too far ahead of us in the field of machinery, I don't know how many years it will take to catch up."

What Luo Jia said was very objective, and it was completely based on feelings.

Blind arrogance is stupid, when you want to enter an industry, you must first have a clear understanding of the current status quo of the industry, know where the gap is, and then try your best to shorten the gap.

Luo Jia didn't have much time to do a lot of research in this area.

After listening to Luo Jia's words, Pang Yunhai was very emotional, most people of his age are very patriotic, and the large list of unattainable giant companies made Pang Yunhai a little desperate.

"Don't be too pessimistic, the road has to go step by step, Neon Country is very strong in the field of machinery, but China's development in the IT field is not bad, we are now paying with mobile phones, and Neon Country is still using cash." Luo Jia said.

The old man and the young had a very good chat, of course Luo Jia would not tell Pang Yunhai that he wanted to build a robot, but only said that he would produce a robotic arm.

Pang Yunhai patted his chest and promised to mill the best parts for Luo Jia, and find the most experienced engineer in the factory to handle Luo Jia's order.

Walking out of the gate of Taidong Precision, Li Moran felt that Luo Jia had taught him another lesson.

The ghost only knows how much industry research Luo Jia has done behind his back, and he is now more confident, it seems that Luo Jia chose to enter the robot industry at this time, and he is fully prepared.

Luo Jia's learning speed is too fast, and Li Moran is also secretly determined to go back to make up for the course of machinery, in front of this terrifying boss, as long as he doesn't study for a day, he will fall behind.

After going back, Luo Jia passed the order drawings to Pang Yunhai, the humanoid robot was too dazzling to make too much, Luo Jia planned to build a hundred sets first.

But the parts can't be prepared according to one hundred sets, and some of them must be set aside for backup, so Luo Jia ordered one hundred and twenty sets.

There is still a lot of work to be prepared, the reducer needs to be ordered from Teichi and Hamanaco's dealers, and Luo Jia is also preparing a high-power wireless charging system to solve the problem of robot energy consumption.

With the help of Li Moran, Hong Tao, and other colleagues in the company, Luo Jia spent two days to complete the procedures and procurement, and then asked Li Moran and his colleagues to return to Shanghai to prepare for the establishment of a mechanical department.

This time, it is up to the two deans, Sha Zhan and Gu Pengdong, to come forward and ask Fudan or Jiaotong University for some top talents in the mechanical department.

Hong Tao stayed in the factory with two colleagues from the administration department to receive purchase orders, and at the same time find someone to overhaul the equipment in the factory, ready to start work at any time.

After arranging these, Luo Jia took the high-speed train home directly from Wuxi, ready to have a good talk with Comrade Luo Ning and let him manage the factory.