Li Chunfeng calmed himself down and re-sorted out the information about Luo Siming.

Luo Siming returned to China in June this year and founded "Sichuang Investment", which began to operate high-tech venture capital and private equity funds.

Returning to China with him, in addition to his driver Ah Zheng, there were also several financial practitioners.

Li Chunfeng quickly ruled out the women among the practitioners, that is, this mysterious woman was not with Luo Siming from the beginning.

Judging from the fact that they met several times in areas that could not be monitored, it showed that they had a strong sense of anti-reconnaissance, and judging from Luo Siming's performance, this awareness should come from the mysterious woman.

Combined with the fact that in just one month, the mysterious woman has changed her appearance to 13 people, and it is obvious that this woman has almost no intention of showing her true face, and of course one of them may be her true face.

Now Li Chunfeng seems to have no way to catch her for the time being, but with the Tianyan system, Li Chunfeng believes that he will definitely be able to catch her.

"Number four, keep an eye on these 13 people. First, once anyone actively circumvents the public surveillance system. Second, anyone who has contact with Luo Siming. In both cases, report immediately. ”

Li Chunfeng directly gave instructions to the artificial intelligence kamikaze 4 of the Tianyan system.

"Yes, master." Four's voice came.

"In addition, you and No. 1 must cooperate well, you have paid close attention to Luo Siming's every move, and if there is any abnormal situation, notify me in time." Li Chunfeng thought of Luo Siming and explained again.

"Yes, master."

Today's cute incident made Li Chunfeng more eager to advance his WTO entry plan as soon as possible, and the appearance of the mysterious woman made Li Chunfeng feel that he needed to speed up the development of robot flies.

Haidu is its own base camp, and there must not be a blank space that it cannot monitor.

Thinking of some of the acquisition plans that Huang Bingchang is currently promoting, Li Chunfeng began to re-examine and plan his WTO accession plan.

However, all plans are based on the continuous improvement of their own technological level, and many things are difficult to achieve if only some existing technologies are available.

Only the super artificial intelligence currently faced by us cannot be completed because of the vacancy of chips. Strong artificial intelligence allows it to only come to the mind, but it must have a network or electromagnetic field.

Li Chunfeng also set his sights on biotechnology, such as cloning people, but his body had already been cremated, and there was no way to talk about cloning, and from the existing technical information, it seems that the cloning technology has defects at the genetic level.

But biotechnology itself still has to maintain research, at least for parents and relatives such as Meng Meng, it will have an effect.

At present, I may not have a lifespan limit, but my relatives cannot, so we must study the technology of life extension.

Thinking of this, Li Chunfeng opened a thread, allocated 10% of the CPU computing power, and began to digest, absorb and research today's cutting-edge biotechnology.

After putting down this concern, Li Chunfeng saw that a large number of new building materials in the factory area were produced from the super magnetic smelting furnace, which were quickly used by the "wrestlers" in the construction of the factory and in the construction of underground projects.

A day has passed, and the construction of the factory is nearing completion.

The three districts of A, B and E have also completed various constructions, and with the arrival of some equipment, as well as the self-made equipment completed by the factory in Area C, the factory in Area A has initially had production capacity.

This will be the factory for the production of its own drones.

Originally, he had completed the simulation test of the UAV design prototype and could be put into actual production at any time, but he was still not satisfied with the storage capacity of the existing graphene battery, although the products developed by himself have been 5 times larger than the products in some university laboratories.

However, such a battery can only ensure that the drone designed by itself stays in the air for about 12 hours, and can not have too drastic flight actions.

Now seeing the super magnetic smelting furnace producing new building materials, Li Chunfeng has been touched, why do you want to use this good thing to only produce building materials?

Perhaps it can be used to produce better graphene materials, which can greatly provide power storage.

As soon as he thought of it, Li Chunfeng immediately entered the virtual reality world to simulate the supermagnetization of graphene materials.

Such material ratio experiments, as well as experiments to penetrate ultra-micro magnetic fields, are not short-term, but fortunately, Li Chunfeng is only pursuing a graphene material that can obtain the maximum power storage.

From the microstructure of graphene, it is a network structure composed of carbon atoms. Because of the limiting thinness, i.e., the thickness of only one layer of atoms, the movement of cations is very restrictive.

At the same time, because of its network structure, the electrode material made of graphene also has sufficient holes.

From this point of view, it should also be easier to permeate the ultra-fine magnetic field, and once the supermagnetic graphene film is formed, there will be more energy storage units, which will greatly increase the amount of energy stored.

At present, the fastest charging time of graphene batteries in the world that provide cars for 1000 kilometers is less than 8 minutes, and the battery made of supermagnetic graphene material obtained by Li Chunfeng will only take 3 minutes for batteries of the same specification.

And this supermagnet graphene battery also has a long service life, theoretically after 500,000 times of charging and discharging, the power can still be maintained at 95%, that is, if it is charged ten times a day, it can be used for 150 years.

And the flexibility of the material is very good, you bend tens of thousands of times, this battery capacity is still maintained. The performance of high temperature and low temperature resistance is also very good, as low as minus 60 or 70 degrees, as high as 150 degrees Celsius, even if it is thrown into the fire, it will not explode, it is simply the best durable goods.

In fact, a domestic university also has similar laboratory products, but Li Chunfeng has even completed the simulation test of the mass production equipment and production process.

After all the completion in the virtual reality world, Li Chunfeng was very happy, which means that the power supply of the robot will also be guaranteed for a period of time in the future.

Considering the carbon fiber material originally intended for the drone, I simply researched a new supermagnetic carbon fiber material this time, so that the durability of the drone will be greatly improved, and I can also use this material to develop some prosthetics to bring good news to the disabled.

And the time in the virtual reality world is longer than the real world, you can make full use of it, complete it as soon as possible, and maybe you can have your own drone tomorrow.

With the development process of the two materials, Li Chunfeng was familiar with it this time, quickly found the right path, did not waste time, and soon obtained a new type of supermagnetic carbon fiber.

This supermagnetic carbon fiber not only has all the characteristics of existing carbon fibers, but also has greater flexibility, tensile resistance, greater strength, higher modulus and lower density.

Moreover, it draws on the supermagnet graphene film, and on the surface of this supermagnetic carbon fiber, a new process is used to wrap the supermagnet graphene film in the outermost layer.

The resulting sheet made of carbon fiber was even stronger than today's tank armor, but lighter, which made Li Chunfeng a little overjoyed.

To this end, Li Chunfeng quickly improved a new model of supermagnetic smelting furnace and added this process to it.

In this way, when supermagnetic carbon fiber is produced, it can be processed by this process as long as it is needed, resulting in a supermagnetic graphene carbon fiber, which can directly generate armor plates. For example, it is used for its own robots, such as the key protective parts of drones.

After the two major problems of materials and batteries were successfully solved, Li Chunfeng quickly retreated to reality.

He first began to produce equipment according to the production equipment designed in the virtual reality world, and built a supermagnetic graphene battery production line in Zone A.

Then the second-hand carbon fiber production line that I just bought was comprehensively transformed, the equipment that should be replaced was replaced, and the carbon fiber production line was rebuilt according to the process designed by myself.

At the beginning, Li Chunfeng also wanted to buy a new carbon fiber production line, but the arrival period of the new production line was very long, and Li Chunfeng felt that he would have to wait too long.

Fortunately, I came across a set of second-hand production lines that were discontinued and eliminated on the Internet, and I immediately bought them, so that they arrived today.

Now it has been completely renovated by itself and equipped with new equipment, replacing the unwanted ones. The whole production line is as if it is brand new, and it is also a fully intelligent production line.

The annual output of the entire production line also reaches an astonishing 5,000 tons.