Li Chunfeng then also carried out the manufacture of a new type of machining center designed by himself, which is based on several machining centers, a comprehensive intelligent machining center developed, and its processing capacity will be five times that of the existing machining center.

With the number of raw materials in the first batch, Li Chunfeng can only produce two, which can be regarded as trial production.

In the future, with this new machining center, coupled with the equipment that has been upgraded and improved by itself and subsequently purchased, once the entire C area factory is fully operational, the production capacity will be very amazing.

And Li Chunfeng only needs to give the next instruction, and he doesn't have to bother to operate the equipment one by one, obviously this is the real Huaxia Zhizhi!

Of course, the premise is that Li Chunfeng wants to prepare chips for various devices that can completely run the "Lux" artificial intelligence.

At present, Li Chunfeng is designing two chips at the same time, one is a high-performance chip based on existing semiconductor technology.

After Li Chunfeng's consciousness was recovered in the computer, he found that the magical space where the consciousness was located, the hard disk was the wall, the CPU was the square center, the memory was the seemingly empty space, and the running program was the star in this empty space.

On the surface, the principle of the computer is a simple world of 0 and 1, but after it is put into operation, the magical space generated is not something that human beings can fully understand now.

It is precisely because Li Chunfeng has seen and mastered it, so now he has designed a new chip architecture after synthesizing the CPU requirements of this magical space.

This architecture is completely different from the existing X86 system and the RISC system, but it is more suitable as the center of the magical space.

Li Chunfeng's new architecture surpasses the existing architecture in terms of computing speed and accuracy, and also has obvious advantages in power consumption, volume, and cost.

This is a high-performance chip that Li Chunfeng can produce with the existing chip production equipment, which is a transitional product, but basically meets the needs of strong artificial intelligence.

The design of another chip is the new advanced technology quantum technology. Li Chunfeng plans to start the design and development of a new optical quantum computer as soon as possible, surpassing the existing state of technology as soon as possible, so as to be able to run his own super artificial intelligence.

In view of the current situation, Li Chunfeng plans to purchase a batch of high-performance servers to meet the needs of the transition period.

After all, it's better to use your own server than to use broilers with fear, and you are afraid that the owner or administrator of the broiler will find out.

So Li Chunfeng placed an order on the Imperial City business platform to purchase, and it is estimated that it will be delivered as soon as tomorrow afternoon, and it will be delivered during the day after tomorrow at the latest.

Li Chunfeng purchased the first batch of 300 high-performance servers, and he will continue to purchase them in the future.

At this time, if someone comes in and sees it, they must be shocked. There is no one here, but it is very lively.

Many hexapod robots come and go, transporting raw materials and parts to designated places, while each machining center produces parts in an orderly manner.

The most amazing thing is the metal 3D printer, after Li Chunfeng's improvement, its printing processing speed has increased many times, and some high-precision complex modeling parts have been quickly printed and manufactured.

Tonight, Li Chunfeng's main task has been preliminarily completed, the factory equipment in Area C has completed its self-upgrade, and a batch of new hexapod robots have been produced, and the manufacturing of two new machining centers will be completed.

As the factory in Zone C entered the final stage of production, Li Chunfeng planned to let the hexapod start the construction of the factory, but found that he had forgotten to buy some building materials.

However, it is still possible to allow them to excavate in Zone D. According to Li Chunfeng's plan, a secret base should be established under the land he bought to store his supercomputer, research center and other supporting facilities.

To this end, in the equipment procurement, Li Chunfeng specially purchased a geological exploration equipment to detect whether the seaside area where the warehouse is located is suitable for the construction of underground buildings.

Li Chunfeng commanded a "wrestler" and used detection equipment to explore the entire warehouse area, and found that the entire geological structure of the underground where the warehouse was located was very stable.

There is even a good rock layer 100 meters underground, which can be used as a bedrock layer for your own underground base, so that the underground base will have a very solid foundation.

Considering that the underground base requires a certain degree of defensiveness, Li Chunfeng will definitely not build an ordinary underground parking lot directly a few meters underground, but intends to build an underground space between 50 meters and 100 meters underground.

In this way, the underground base has a natural 50-meter sand layer, which can effectively defend against the blows of ordinary ground-penetrating bombs, and Li Chunfeng also plans to fill a large amount of reinforced concrete for reinforcement if he has the opportunity, so as to greatly increase the defense level to the extent that it can withstand a small-yield nuclear strike.

Of course, in this era of peace, a nuclear strike is a bit too far.

According to the underground base planning map, Li Chunfeng immediately issued an order to put most of the "Lux" into the excavation work, and among the six mechanical arms of the "Lux", the front part of two mechanical arms was replaced with high-speed rotating knives, and the other four mechanical arms were replaced with digging buckets.

Two robotic arms that rotate the knives instantly crush the ground, followed by a layer of soil, while the four robotic arms behind them wield a bucket to dig up the crushed soil and load it into the back car.

When the wagons are filled with earth and rock, they step aside and dump the dirt and stones out of the wagons, and then return to their original positions to continue construction.

Dozens of "wrestlers" started together, only to see the robotic arm waving like a forest, and several huge holes appeared in Area D in an instant, and gradually developed in depth.

At this time, the two new intelligent machining centers were finally completed, and with the exhaustion of the first batch of raw materials, other equipment was temporarily suspended, and the processing equipment in Area C has entered the standby state one after another, and the factory has gradually become quieter.

Li Chunfeng found that the cleaning robot was removing a lot of metal debris from various pieces of equipment, and then dumped it on the place where the earth and rock were piled up, which was obviously the residue produced by today's machining parts.

Looking at the gradually piled up of earth and rocks and the pile of metal debris next to it, Li Chunfeng suddenly remembered that there was a technology for turning waste into treasure, which seemed to be the technology of making some kind of building bricks.

Li Chunfeng immediately began to search for relevant technical materials, and as he researched, his interest grew, and he immediately built and simulated it in the virtual reality world.

A new type of building material seems to be born, but it is always a little bit closer, and every time it is processed, there is a problem in a certain test.

After countless failures, Li Chunfeng almost gave up, and wanted to fuse ordinary earth, stone and metal chips into a building material, which was obviously whimsical.

Once again, the building materials were molded in the virtual world, and suddenly Li Chunfeng subconsciously wrapped his thoughts and infiltrated them, and then finally rolled them into shapes.

Tests of various strength, hardness, heat insulation, heat preservation and so on were carried out again, and then Li Chunfeng was shocked by the gorgeous data indicators.

What's going on? What did I just do? Is it really a treasure?

The indicators of the new material are simply beyond human imagination, and a building built with this building material, if the foundation of a high-rise building is built, will ignore a magnitude 10 earthquake.

If it is used to build military fortifications, it is estimated that only nuclear bombs can destroy them.

After thinking about it carefully, Li Chunfeng found that it was because his mind penetrated the material when it was about to be formed, and generated a lot of super tiny magnetic fields, thereby changing the properties of the material, so what was his idea?

The explosion of ideas before made Li Chunfeng think that it might be some kind of electromagnetic wave, or it can also be said to be an electromagnetic particle that can propagate through electromagnetic waves.

This propagation is full-band, for example, whether you're 2G, 3G, or 4G, or 5G, even if you're Bluetooth, it can propagate without video segments.

This is why kamikaze 2.0 spreads to a variety of independent network devices.

Now, however, the idea of forming this material has led to a completely new material, one that combines the plasticity of clay with the hardness and strength of metal.

The idea can actually produce an ultra-micro magnetic field, so as to maximize the optimality of the elements, and this super catalyst effect makes Li Chunfeng overjoyed.

What an almighty mind!

After another series of tests, Li Chunfeng happily prepared to produce this material in reality.

Of course, the first thing to do is to retrofit several machines for the production of this building material.

As more and more soil is excavated, it seems that there are a little less metal chips, which should affect the hardness and strength of the new material.

Thinking of this, Li Chunfeng began to transform the production equipment on the one hand, and on the other hand, he further tested the material in the virtual reality world, this time preparing to calculate the best ratio of this material.

In the virtual reality world, Li Chunfeng finally found a relatively balanced ratio after thousands of ratio tests.

Back to reality, it was found that the equipment had been transformed and assembled into a production line mode in Zone D, so Li Chunfeng transmitted the corresponding ingredient ratio to the brain of the final molding equipment, and then issued production instructions.

However, the first batch of materials came out of Li Chunfeng's expectations, and they did not have the kind of strong characteristics in the virtual reality world.

Isn't it possible that the method of mind penetration can only be useful in the virtual reality world, but not in the real world?