It turns out that the second workshop of Feiyu Technology is a nearly unmanned production workshop, which has a total of 12 large-scale high-end CNC machining centers, 28 medium-sized high-end CNC machining centers, and some other supporting equipment.

This workshop is responsible for the processing of parts and components that require the highest precision in Feiyu Technology products.

But this morning, when a process was carried out, one of the large CNC machining center software was abnormal, and then there was a chain reaction, and all 40 high-end CNC machining centers in the entire workshop were paralyzed.

Since this workshop is responsible for producing the parts needed for the Mars project, and the security personnel have reported to the above, Ning Shuangshuang will come here.

Ning Yuze led the two all the way to the second workshop, outside the workshop, Du Qiu saw armed police soldiers standing guard, which showed that there was a heavy security here.

Tang Guo's Mars plan will complete the three major exploration tasks of orbiting, landing, and patrolling in order to achieve a single launch.

This is something that no country has done, like the most accomplished country in Mars exploration, these three major tasks are achieved separately.

Therefore, for the equipment used for Mars exploration, the precision requirements of the components are extremely high.

At this time, the second workshop that undertook the task of parts processing actually had a situation, and Ning Yuze was very anxious in his heart.

The three of them changed into dust clothing and entered the second workshop.

The CNC machining center in the whole workshop is neatly arranged according to the parts production process, and at this moment in the middle of the workshop, about five or six people are discussing around a CNC machining center.

"Dr. Ye, do you think there is a problem with the motor driver?"

"I can't make up my mind yet, and the current performance seems to be like this, but it's better to deal with the failure of the magazine shift first."

"Teacher, does the production line control program need to be checked?"

"That's not necessary, now it's mainly a problem with this machine tool, and other machine tools will automatically stop because of a problem with this machine tool and the process is disordered."

……

Among these people, one of them saw Ning Yuze and the three of them, and hurriedly greeted them.

"Chairman, are you here? I invited Dr. Ye Haibin from the Machine Tool Research Institute, who is an expert in the field of CNC software in China, and came back from studying in the United States, and is familiar with Hasi's equipment......"

"Chief Engineer Tang, have you found the cause of the problem?" Ning Yuze asked.

Hearing the two talking, several others stopped.

One of the middle-aged men of medium stature walked over and said, "Chairman Ning, hello, I'm Ye Haibin. ”

"Dr. Ye, I've worked hard, I don't know if the cause of the fault has been identified?"

Ye Haibin frowned and said: "It hasn't been fully confirmed, we are investigating one by one, and the preliminary confirmation may be that there may be a problem with the motor driver, but because of the shutdown halfway, there is also a problem with the displacement of the tool magazine, which needs to be eliminated first." ”

At this moment, another short middle-aged man came over and said with some doubts: "I don't think the conclusion should be so fast, at least the servo motor is in good condition now, and it doesn't look like there is a problem with the drive......"

"Vice President Zhao, we invited Dr. Ye to help diagnose the cause of the failure, and it is best to give a certain amount of trust, and we can't just look at it because of disagreement."

Chief Engineer Tang had already interrupted Vice President Zhao's words with a look of displeasure.

Looking at this scene, Du Qiu suddenly understood that Vice President Zhao and Chief Engineer Tang were only afraid that the relationship was not very harmonious, otherwise they would not be able to argue on such an occasion.

Ning Yuze said: "In this way, you guys will think about it carefully." Xiao Du, you go up and have a look. ”

He waved at Du Qiu, startling everyone else.

Who is this young man? The chairman actually asked him to go up and check the fault.

Ye Haibin's face was a little unpleasant, he looked at Chief Engineer Tang, and saw that Chief Engineer Tang shook his head at him, so he didn't speak.

Du Qiu didn't care about this, he walked to the CNC machining center in a few steps, first circled around the equipment, and then checked the fault code reported by the equipment on the console.

With that long list of fault information, the scalp of ordinary people will be numb when they see it.

But in Du Qiu's eyes, he seemed to see something inside.

About ten minutes later, Du Qiu left the equipment and went to other equipment.

Seeing this, the student assistant brought by Ye Haibin couldn't help but sneer, "This equipment is faulty, what did he go to see what other equipment was doing?" Does this person understand? ”

"Xiao Wang, don't talk nonsense!" Ye Haibin pretended to scold.

Chief Engineer Tang approached Ning Yuze and asked, "Chairman, is this ......?"

"Oh, he's the one I hired, a rising star in the field of CNC software."

Chief Engineer Tang was stunned, when is there any rising star in the field of CNC software?

Vice President Zhao followed at this time, leaned next to Du Qiu and asked, "You check other equipment, do you suspect that there is a problem with the process control program of the production line?" ”

Du Qiu smiled and said, "I'm not sure yet, I'll know until I've seen it all." ”

Then the topic changed: "Oh, Vice President Zhao, are all your equipment products of Harth Company?" If something goes wrong, why don't you ask someone from Harth to repair it? They have a branch in Magic. ”

Vice President Zhao smiled wryly and said: "The parts processed here are all confidential tasks, if you let the people of Mi Guo repair the equipment, wouldn't it be a leak?" ”

"In the past two years, some aviation and military enterprises have changed the software of central data, why haven't you changed it?"

"We have high precision requirements, and there will be a lot of problems with their software."

After Vice President Liu finished speaking, he asked: "The chairman invited you to come, are you sure to fix our fault?" ”

Du Qiu was noncommittal, looked at all the machining centers in the workshop in a row, and then asked: "Before the failure, was there anyone in the workshop?" ”

"Oh, this is an unmanned processing workshop, but there are two engineers on duty, they were not in the workshop at the time, and when they saw the equipment alarm light on, they stopped the entire production line in time."

"So which company did the layout of this production line? And which one is used for the whole line of automatic control system? ”

"The layout of the production line is done by ourselves, and the whole line of automatic control system is controlled by Huhai Precision."

"Huhai Precision Control? The one that was acquired by the United States Company the year before last? ”

Vice President Zhao's face was gloomy and he said: "Yes, in the past, there were three domestic automation software companies to choose from.

In the past two years, the founder and chairman of the company in the imperial capital have left, the company has been acquired, and the magic capital has not escaped being acquired by foreign capital, and the founder of the company in Hangzhou has just come out of prison, although there are products, we don't dare to use them. ”

After Du Qiu finished the inspection, he clapped his hands and said, "Are you afraid that the chairman will be arrested again, the company will collapse, and there will be no follow-up service?"

However, with the software of Huhai Precision Control, you can't ask someone to deal with the situation, it's not the same. ”

Vice President Zhao's eyes lit up and asked, "Did you find out that the fault was a problem with the automatic control system of the production line?" ”

"Eight or nine is not far from ten."

The two walked back to the faulty equipment, and Ning Yuze asked, "How is it?" Have you found out why? ”

"It should be a problem with the automatic control system of the production line, and this problem is not simple."

Dr. Ye Haibin showed disdain on his face and said: "Young man, it is obvious that there is a problem in the processing of the equipment, why are you to blame the production line control system?"

Haas equipment handles the processing process independently, and after the processing is completed, the finished product transfer process is the scope of the production line control system. ”

After criticizing Du Qiu, he turned to Ning Yuze and said, "Chairman Ning, I'm sure it's the fault of the equipment itself, please allow me to fix it." ”

Seeing Ning Yuze's gaze looking at him, Du Qiu said indifferently: "Okay, then please ask Dr. Ye to come first." ”