In fact, in addition to this humble menu, there are many numbers floating in this space.

For example, there is a small line at the top of the menu:

Design room: level1, exp: 0/10

There's even a number to the right of the craftable menu: 2/2.

In the space around him, there are also some numbers suspended in the air, which mark the current boundary and scope of the design room, as if this white space is not exactly the scope of the design room, and the surrounding should be counted as the internal space of the Book of Creation, and the design room is only one of its components.

This is the effect of the Quantitative Eye.

The skill of quantitative eye, what Huang Si can't understand, it can't show at all, and what it shows must be something that Huang Si can also detect by careful observation and research, such as the diameter of the molecule.

Taking the current level and experience points of the design room as an example, through the memory that the Book of Creation threw to Huang Si, he could vaguely feel that the design room could be upgraded, and there might be new menu items in the future.

As for the 2/2 that can be crafted, it obviously means that only these two things can be crafted, and there are no other non-craftable items.

So let's see what we can do?

Huang Si clicked on the automatic manufacturing lathe, and a prompt automatically popped up in the air.

Automatic manufacturing lathes:

It can be manufactured automatically by the design office, which greatly reduces the burden on the creator. It is recommended to give priority to production.

Law Needs: None

Drawing Requirements: None

Material requirements: the power of creativity

It's no wonder that it can be manufactured directly, and the requirements are really simple.

Let's look at something else.

Automatic Drawing Machine:

It can automatically retrieve the illustrated book, automatically read the knowledge system of the creator, calculate the success rate of drawing drawings, automatically draw drawings, and test the validity of drawings.

The following requirements are exactly the same as those of a lathe.

That "recommendation" does make sense, the automatic lathe can be manufactured automatically, reducing the burden, and at first glance it is a good thing for a person who loves to be lazy.

The designer of the Book of Creation has a great appetite for him, and although he doesn't know who it is, Huang Siwei gave him a thumbs up.

Then it was simple, Huang Si pressed his hand on the line "automatic manufacturing lathe", and then a translucent phantom of a lathe appeared in the space around him, and a dialog box appeared near his finger:

Manufactured or Not: OK/Cancel.

The moment Huang Si clicked on the OK button, the diagram of the entire automatic manufacturing lathe automatically unfolded in his mind, and its complexity almost completely deprived him of all thinking ability.

Fortunately, after experiencing the incident of the world core using the world projection to explode consciousness, Huang Si has become accustomed to working under high pressure.

Huang Si looked at the illustration of the lathe displayed in his head, and found that he only needed to use the power of creation to generate each part one by one as shown in the illustration, and some of the connected parts in the middle were also generated according to the diagram. The properties and materials of the parts are explained in detail, and even the functions and principles of each component are explained.

It is worthy of being the first recommended production equipment for novices, and even the illustrations have such a complete guide. Huang Si admired the predecessors of the creator system, so he planned to give it a try first.

The power of creation is derived from his soul, and through physical contact, it is poured into the space inside the book of the Book of Creation, and then enters the design room.

An illusory shadow looms in the design room.

The project was extremely complex, and Huang Si devoted almost 99% of his attention to the lathe, leaving only a little attention to meet his daily needs.

Countless intricate patterns crossed his consciousness, and then the power of creation condensed little by little according to the diagram. The pattern of the lathe is as clear as weaving. In this process, he also wrote down the relevant knowledge of the functions and operation of the various components inside the lathe.

And so the day passed.

Since the help of artificial intelligence, Huang Si has completely exhausted his creative power for the first time. He went to sleep, and when he woke up, his reserves of creative power were almost full again.

After cleaning up and getting up, Huang Si sat in the living room and waited for dinner.

Moxia made breakfast for him, and when he saw that he was not in a good state, he asked worriedly, "Father is not feeling well?" ”

"No, it's fine. If you have to use an analogy, you can think about the feelings of students who have just taken the college entrance examination. ”

Huang Si just consumed too much brain power and soul, and he was a little unbearable.

After breakfast and a moment of relaxation, he threw himself back into the manufacture of lathes.

After all, this thing sounds like a thing that can hang up automatically, and making this is the real sharpening knife and not cutting wood.

Ten days later, Huang Si finally got out of the nightmare of making a lathe. His soul had been working at full capacity almost all the time for the past eleven days, and now he felt only extremely tired.

But there are benefits.

The experience of making lathes has brought him relevant knowledge about machinery and design, in the space of consciousness, the laws of the earth have changed, and now the machine has changed from 21.93% to 22.47%, and even he can vaguely sense that there is a "design" law field nearby, but the estimated value is less than 1%, so even the data cannot be displayed.

This experience of doing equipment manually is not bad, although it is tedious and tiring, but it can learn something.

After the lathe is officially formed, it is a square table with dense patterns on the surface, and if you look closely, you will find that it is not a pattern, but some etched channels, like a circuit board. The edge of the lathe is densely covered with 1*10e8 production interfaces, which can be used for multi-threaded production. The inside of the lathe is the core of automation, which can automatically draw the power of creation and automatically generate items according to the drawings.

After the lathe was built, the experience of the design room became: Level 1:1/10.

The lathe is large and takes up part of the book.

Huang Si probed this thing with his consciousness and found that the function was extremely complex and difficult to explain in a scientific way.

The memory given by the Book of Creation originally mentioned that the composition of the items made in the design room is equivalent to an artifact, but it is generally the lowest level of artifact, and it cannot reach the level of a creation artifact.

Previously, Huang Si poked the "design" button, but found that this interface only gave him a blank piece of paper, on which he could draw drawings with his mind. He tried to draw it.,But because of the stubble.,Accidentally drew a cat-eared Lori.。

It's just that the painting is good-looking.,The key is that he has no artistic cells.,The cat-eared Lori painted doesn't look like Lori at all.,Just like a hairy monster.。

Unconvinced, he painted a few more times, but each time it got worse and worse. People who don't have a talent for drawing are just that.

Huang Si had a calm face, clicked the clear button in the design menu, deleted his graffiti, and forgot this black history.

Wonderful Book House