In the warehouse where the robot is being repaired, Ling Qi is very busy.

The eight-handed crab-type miner robot that was in the garbage dump just now, and he used a tool to get it to death, and carried it back for dissection.

First, use various tools to remove all its hands and pliers. Arrange them neatly in order. Then remove the housing of the robot hand and the hydraulic steel pliers. Expose its inner structure.

Next, use a wrench to open the shell of the lower semi-elliptical turntable, and remove the bearings connecting the upper and lower turntables with various tools.

Continue to remove the outer shells of the upper and lower semi-elliptical turntables. The inner workings of their machines are exposed.

Ling Qi dismantled it very carefully and carefully, and some of the more complicated places were especially remembered with a pen and a notebook.

Then dismantle the various circuit boards and electronic accessories built into the structure.

Like a cow, dismantle the entire robot.

All the machine parts, accessories, main skeleton, shell, graphene battery and other miscellaneous things add up to more than 1,000 in total, and a large piece is placed on the ground.

I found a large stack of dusty and simple manuals and began to read them, which contained the instruction manual of the eight-handed crab robot, and the principle and structure manual, maintenance manual, software driver manual, and computer system manual.

Ling Qi began to study these instructions diligently.

When he was a soldier, he studied for three months in the military engineering department of the army. I learned the most basic housekeeping skills of the army engineers!

Legend has it that you can get pregnant at a glance!

Its function is that as long as he can see a page of any book, he can use his eyes to make a two-dimensional stop-motion copy of that page, and store it in his mind like a photograph.

This skill requires you to do a lot of two-dimensional modeling exercises with brain power and eyesight. It is very draining of the spatial imagination in the brain.

The training method starts by looking at the pictures! It is recommended to find a relatively simple picture! Look at it for ten minutes, then close your eyes. Restore it in your mind! You can exercise the two-dimensional modeling ability in your brain.

It takes patience and slow practice, at first you look in your eyes, you think you have memorized such a simple picture! Once you close your eyes, you can't remember it, because this kind of skill can only be exercised without stopping.

Exercise until you can memorize complex pictures in a short period of time! As soon as you close your eyes, the picture will appear in your mind. If you can do that, you're already half the battle!

Then slowly replace the pictures with text to exercise, and grasp how to increase the difficulty of learning by yourself. Until you read a page and never forget it, it is success.

The trick to learning this kind of "picture writing wheel" is to pay attention, whether it is looking at pictures or words, not for you to understand and understand its content. You go to see what it's about only distracting you from your mind and memory.

The advantage is that whenever you want to use it, you can call it up in your head to play it back.

The downside is that after a while, as long as you don't use it, your brain will delete all the pictures you remember.

Ling Qi didn't care about anything, desperately flipped through the book, useful and useless, write it down first.

When he has done all of the above, he has become the re-parent of this robot!

It's no exaggeration! If this robot were a child, from the tip of the hair to the toes! Which place, how many hairs are there? He knew it all very well.

Next, the transformation work is carried out, and the internal structure of the machine, the part that needs to be transformed, is placed on the industrial machine tool for processing and transformation.

In my head, I kept combining the idea of transformation with the knowledge in the book!

The tools in your hand clanged! In the structure of the machine, the parts that need to be changed are clearly arranged in the mind.

Skillful operation on industrial machine tools, where machine parts are to be transformed, all kinds of grinding and cutting drills. The place where the welding should be welded is welded, and the place where it should be polished is polished.

After the parts that need to be changed by the robot are processed and transformed, various tools are used to assemble the overall structure of the machine.

The robot's hardware is ready! Only the development, use, driver, and installation of the software are owed!

The AI level of the robot is too low, and the intelligence aspect is not ideal. The circuit board needs to be expanded additionally, so it also needs to be fabricated.

So he found some electronic parts in the shelf full of parts for repairs!

A chip and a computer are integrated and a circuit board.

The chip is integrated with the computer and soldered to the circuit board with a high-frequency electric soldering iron. Then solder the freshly soldered circuit board to the computer motherboard of the robot that has just been disassembled!

Then use a data cable to connect the ports of the desktop computer and the computer motherboard of the robot.

When you're ready for this, sit down in front of your computer and open your computer's programming software.

Fingers are like playing a piano, constantly "snapping and ......" on the old-fashioned mechanical keyboard, writing code, and importing it into the system through software.

Ling Qi kept an eye on it. In addition, a special piece of code was written for the integration of the newly installed computer.

The way this particular piece of code works is very peculiar and archaic.

A long, long time ago, some profiteers who produced electronic products would secretly bury mines in the computer integration of the electrical appliances they produced!

Define the lifetime of its computer integration through code!

As long as the time comes! This computer integration will break automatically! And at this time, the maintenance period is basically over!

Then you are faced with two choices, go for a repair or buy another one.

In the case of maintenance, because the maintenance period has passed, he has to pay money, which is equivalent to helping him support the workers of after-sales service.

Want to buy another one? He'll sell you a new generation of products!

And Ling Qi added this setting to the computer-integrated program in this robot! Integrate this extra extended computer and it will automatically break when it's time to set it!

After all the computer codes had been imported into the control system's programs, Ling Qi put various circuit boards and electronic accessories back on the robot.

The skeleton of this robot and all the parts on the internal structure, power supply, electronic accessories, motherboard, wiring, etc. are all assembled, only the shell is missing.

Ling Qi began to "snap pop" code again, writing a remote control software that can control the eight-handed crab robot.

Use the robot's built-in wireless network settings and computer wireless connection to control the robot through software.

After the software is written, it is directly packaged and packaged. Install it on your computer and complete the driver.

Carry out the final work, testing, debugging and modification work.

Start the robot in the software of the computer, and the computer screen of the "beep ......" robot begins to light up, and the boot is ready.

Start to debug the integration of the robot and the software, and then test whether the newly modified arm of the robot meets the ideal requirements in operation. Then rectify the unsatisfactory areas.

Everything is inspected, and finally the shell of the eight-handed crab robot is installed.

The eight-handed crab transformation robot is done! Ling Qi finally breathed a sigh of relief and looked at the time, it was already 9 o'clock in the evening.

It's really busy, and it's very hard, and it consumes a lot of brain power and a lot of physical strength! Haven't eaten dinner yet.

But fortunately, this labor camp is very humane.

Because people who do maintenance work often forget to eat, it is a common occupational problem! So you can eat three meals a day at any time.

The inmates are all robots, so naturally no one will complain.

Ling Qi used the pager to order dinner, and then ran back to the dormitory non-stop and got the promised sugar packets and oranges! Then he ran back to the warehouse door non-stop to guard the robot that came to deliver the food.

These service robots and patrol robots have front-facing cameras that transmit everything they see back to the prison's surveillance video camera.

Because Anton was tied to the warehouse, Ling Qi didn't want to be discovered. If the matter of binding Anton is discovered, then everything he has paid will be in vain! So be extra careful about it.

After getting the robot's food delivery, Ling Qi, who had just taken a breath, started his work again, and he didn't even care about eating.

Start the robot you just modified and let it do its work.

This eight-handed crab-shaped transformation robot was transformed by Ling Qi into a robot used to transform the same kind.

In the warehouse, it will automatically look for eight-handed crab-shaped miner robots that need to be repaired, disassemble all the robots that need to be repaired, and then carry out fully automated transformation according to the AI program written by Ling Qi.

When Ling Qi transformed it, he gave it the hardware and software needed to transform its kind.

When it disassembles the robot that needs to be repaired, its aI logic program will sense, detect and judge whether the part it dismantled needs to be repaired.

If a simple repair is required, it can repair it on its own. If it comes across a part to replace, it will look for the part to be replaced on the shelf where the repair part is placed.

If it encounters a problem that it can't solve, it will automatically alarm the police and let Ling Qi deal with it.

Ling Qi breathed a deep sigh of relief when he saw his proud robot working according to the AI program he had set.

Although the efficiency is very slow, it also reduces a lot of burden on his shoulders.

Then he took out the treasure bucket hidden in the warehouse and stirred the one-way exhaust valve. Then he secretly hid the bucket again.

He was only relieved just now, and took out another ceramic jar that he found in the garbage dump this afternoon.

After rinsing the ceramic jar and feet in the hot water tank, put all the sugar packets and oranges that you will have for dinner today into the ceramic jar.

The sugar packet is crushed and kneaded, the orange is cut into pieces and shaken, and then it is still different from noon, and it is stirred with your feet! Form a yellow-orange-orange dough.

Pour half a bucket of hot water into the ceramic jar and wash the dough away. Seal the cylinder mouth with a plastic bag, and then wrap the ceramic cylinder with mechanical lubricating oil and paper, several layers inside and outside, and seal it.

Then a one-way exhaust valve with a hose was made and inserted into the ceramic cylinder.

Secretly took advantage of the night to put it in the pit dug in the garbage dump this afternoon, covered it with several layers of quilts that had been embezzled from the dormitory, and hid it.

Turning around and returning to the warehouse, he glanced at Anton, who was still asleep, and remembered a sentence.

I'd rather you be as quiet as you slept than to see the ruthlessness of your wakes up!

Ling Qi's stomach was really hungry, he was already hungry and playing drums, but he couldn't eat the dinner on the table when he looked at it, and this dinner still had its effect.

I had to endure hunger and bury my head in work. Fortunately, when I was a soldier, I often carried out hunger special training tasks, and if I exercised, I was different from others! Otherwise, you won't be able to do it.

The eight-handed crab transformation robot, in fact, the function and function are not perfect enough, it will only disassemble, simple repair, transform and replace parts for the robot that needs to be repaired, and assemble.

It does not process the robot's computer motherboard, and does not automatically solder the chip, computer integration and circuit board together with a high-frequency electric soldering iron, and then solder it to the original robot computer motherboard.

It will not import the code written by Ling Qixin into the system of the robot's computer motherboard.

So Ling Qi's next job is to rebuild a robot that needs to be repaired.

Let it learn to use a high-frequency soldering iron to solder the chip and the computer integrated circuit board together, and at the same time process the robot computer motherboard. Connect the motherboard of the robot computer to the computer with a data cable.

Then, I have to write a very old plug-in for the computer, called a mouse and keyboard emulator!

It works fairly simply! As long as the computer detects that the robot computer motherboard is connected to the computer through the data cable, it will automatically import the code written by Ling Qi into the system of the robot's computer motherboard.

As long as these two problems are solved, all the work pressure of this month can be solved.

At this time, Ling Qi, who was suffering from hunger and exhausted exhaustion, continued to concentrate and concentrate on his work.

As the saying goes, there is no blessing, and there is no one-way disaster! A demon from hell is gradually waking up......

"Please go to QQ to read and support the genuine version, ask for comments, ask for irrigation, ask for collection"