"Don't worry at all, I'm here to watch, as soon as this thing's claws are down, I'll immediately go up and make up for it."

"As a beast, this thing is standing on two feet and covering its eyes with its claws This action is not easy, in this situation, there is no way to recover from physical fitness, and maybe even it will continue to consume physical energy."

"So you don't have to worry about that."

When Huang Hua opened his mouth to speak, my frowning brows gradually relaxed, Huang Hua was right, in such a posture, at least for a structure like a beast, it was an extremely physically demanding action.

In this way, it will be difficult for Xi to recover his physical strength, and the delay time can be extended indefinitely, so that the search time for the mechanism here should be enough.

I slowly retreated, I can definitely trust Huang Hua's level and ability, basically there is no need to worry too much.

I slowly walked to the location of the coffin before the corpse with the stone crown, and the stone coffin had become fragmented under the strong force of the fire, and the few remaining burial goods in the coffin that had not had time to be taken out were also crushed and deformed.

My brow furrowed, and it was in this position that the corpse with the stone crown sat up.

This was probably the last time I saw the corpse, after which everyone was pushed out of the grave by the corpse flow.

However, on the way back, we did not find any traces of the stone crown or any fragments, and there is a ninety percent chance that this corpse was not chased out at all.

The corpse is not small, and there is no trace here, where did such a corpse go?

At this moment, my eyes suddenly flashed, and I vaguely seemed to see something under the fragments of the coffin.

I slowly stretched out my hand, the fragments of this coffin were not small, about the size of half a person, and the weight was not light.

Laboriously moving the stone away, my pupils suddenly shrank.

Underneath this stone is a small square passage.

Wrong.....

This is not a passage, and the structure of the mechanism can be seen underneath the hole, and traces of the mechanism can be seen at the edge of the hole.

This place is supposed to provide a passage between the linkage mechanism and the coffin.

However, this should not be the only passage, just this passage has no way to accommodate the previous corpses and so many burial goods.

Combined with the previous disappearance of these bodies and burial goods, there should be a larger passage in the vicinity.

I slowly scanned the coffin along where it was supposed to be, probably not expecting such a heavy coffin to disappear, so the mechanism below was very rough.

Combined with the structure of the passage where the mechanism is placed, it took me less than a moment to find the location of the mechanism.

Although there is no way to completely discern the specific structure inside, as well as the function of the components of each mechanism, the general direction of operation and the connection position can still be distinguished.

Click....

The moment my hand pressed into the mechanism, I could immediately hear the small sound of the mechanism activating.

The entire ground that had been under the coffin suddenly turned over.

At this time, I can clearly see the operation of the whole mechanism, and when the stone slab on the ground is flipped, I can faintly see the steps below through the gap created by the flip.

This means that the purpose of this mechanism is not only to turn things up underneath, but also to control the exit.

The stone staircase that had just flashed clearly indicated the existence of a passage underneath.

It's just that at this time, the bottom plate was completely turned over, and the re-added passage mouth was tightly blocked.

Just what should be done next?

The speed at which the slate flips is not slow, and it is almost impossible to jump down by flipping it.

Although the sound of this mechanism is low when it is activated, you can clearly feel that the mechanism is full of power and mechanical feeling, and it is impossible to think that something is stuck in the exit.

I took a slight turn around the neighborhood.

"If the mechanism in the mouth of the mechanism is linked to the mechanism that connects the mouth of the channel, then when this thing is flipped, is it okay to destroy it with something?"

I put the knife back down, muttering to myself and drawing a bronze dagger.

When it comes to destructive power, the extremely sharp bronze dagger in his hand is naturally superior.

There is still a lot of heat surging in my body, and the remaining strength in my body should be sufficient, and in such a situation, it should be possible to destroy the structure of this mechanism.

My bronze dagger is an unusually sharp and tough object, and combined with the strength in my hand, it is not difficult to get the mechanism stuck in a sturdy way.

However, this takes a very good amount of time, and the time it takes for the mechanism to activate and reach it through a person is about one second, and the end is about two seconds.

In other words, the interval is only one second.

If the timing is not accurate, it is difficult to guarantee that one person will pass through when the entrance door rotates to a stop.

It's a conundrum, and just thinking about it can be stressful.

I looked back and forth between the two places, and slowly walked over.

Fortunately, the position where the mechanism is activated is not too far away from these two points, that is, less than half a meter, if the position of the activation mechanism is far away, this timing is not so easy to control.

I gently pressed the mechanism, and the moment the mechanism was activated, I could indeed see that the mechanism in the linkage channel that I had discovered for the first time was in operation.

Without the slightest hesitation, I immediately plunged the dagger in my hand into the passage of the mechanism.

Click.....

The position I chose was where a turning gear was located, which should occupy some sort of critical transmission.

The moment the dagger was plunged, it was immediately stuck in the gap between the gears.

The dagger went sideways, and the movement between the two gears stopped instantly.

I gripped the dagger tightly with one hand, and with the other I took a hammer and chisel from my backpack.

After making sure that the dagger card was strong, I thought early and the hammer slowly moved to one of the teeth of the gear.

This one gear is about eight teeth, and on the surface it looks like it should be made of some kind of special stone.

The bronze dagger is a vital weapon for me at the moment, and I must not give it up like this.

According to my calculations, first break every tooth of the gear with a chisel nail.

(https:)

Please remember that the first domain name of this book is:. Mobile version reading URL: