Most of the preparatory work has been done, and it is enough to install the micron camera. Vitakid mounted the micron cameras on the top of the two jellyfish umbrellas and stepped onto the deck.

"Patriarch, you can get started." Weta Base walked over to the battleship fence and threw two "jellyfish" probes into the sea.

The group returned to the battleship workshop, Vitakid sat in the position of the main control console, and skillfully began to control the "jellyfish", and on the large screen in the workshop, the "jellyfish" appeared in the water.

Just like last time, the "jellyfish" dives to a depth of 1250 at the bottom of the sea, and the real face of the underwater structure appears in the picture.

This time, Vitakid directly manipulated the Jellyfish to approach the underwater structure.

This time, the "jellyfish" is equipped with a micron camera, and the image of the seabed is completely high-definition, and the lines on the pillars and steps of the seabed building are more clearly visible.

The two "jellyfish" circled around the underwater building, took photos, image information and data information from different angles, and transmitted them to the main control station in time.

Based on the transferred photos and data, the computer begins to perform scale restoration and real-time data modeling.

"Kidd, this wave of operations is okay." Black Wolf praised that these "jellyfish" work underwater, not only sending back clear images and photos, but also directly through the data for timely 3D modeling.

"During this time, I'm definitely not idle, how can I not come up with some dry goods?" Vitakid raised his eyebrows and continued to operate the "Jellyfish" for underwater operations.

The large screen in the workshop is two, and the three-dimensional underwater building data model on the other side has begun to be built.

The top of the entire underwater building, about the same size as a basketball court, connects the entrance from the bottom to the top, a total of 100 steps, every 20 steps on the left and right sides of the column carved with patterns and symbols.

Judging from this picture of real-time 3D data modeling, the exterior of the underwater structure looks like the Taj Mahal of the Three Kingdoms.

After filming the perimeter of the underwater structure, Vitakid controlled the two "jellyfish" to continue to approach the underwater structure.

Last time, Vitakid only got a little closer to the pillar and immediately let the "jellyfish" dive, but this time Vitakidd did not repeat the mistake of the past, and the onlookers held their breath and waited for the two "jellyfish" to find a chance to enter the underwater structure.

"The temperature is nineteen and eight, and there is not much change from before, I hope I can have good luck and find a place to go in......"

Vitakid whispered as he operated the "jellyfish" from the bottom of the building to find the entrance.

Under the operation of Vitakid, the two "jellyfish" slowly came to the position of the door of the building, and it can be clearly seen from the large screen that the circular door is engraved with animal and plant patterns.

In the center of the door there are two knockers, and Vitakid zooms in on the image to look for gaps.

Through the slight change in temperature on the "jellyfish" sensor, the two "jellyfish" lived up to their expectations and finally found a passage into the underwater building on the left side of the door.

"It's been so many years, and it's the first time I've seen such a well-preserved undersea building, and it's so troublesome to find a gap......

"Friends, are you ready? Soon, you will see the inside of the underwater building, and I hope it will not be frightening......"

Read the URL: m.