The special alloy was quickly transported to the side of the machine tool he bought from the mall to Luoluo, although the processing hardness of this equipment reached 101 when it was bought, and the same as these special metals that had just been smelted, but it was also very difficult to process, but now all the knives of this equipment have been replaced with the original remaining knives of this factory, because this alloy is the worst among all the super strong and super hard special metals in this factory. It turns out that there are more than a dozen formulas of special alloys left in this factory that exceed the hardness of diamonds, and the highest No. 1 alloy even reaches a hardness of 150 shamelessly, but this metal is used as a cutting tool for machine tools and equipment in the factory. And the production of this alloy is very complicated www.biquge.info and even after it is produced, it cannot be processed. Not to mention others, but other alloys are not so perverted, the highest is about 112, but other metals they can't use for the time being, even if this machine tool bought in Luoluo they civilized replacement with the original factory These knives can only process materials with about 105 hardness, and then the machine tool will not be able to stand it, so the special alloy with more than 105 hardness is temporarily unusable.

Before, because the old man did not carefully check the original information in the factory, they did not know how many metal formulas were in the factory, and the storage place of these formulas was very confidential. It is all stored in several places, so it is normal for the old man not to know, and later Zhu Lei's parents told him on the phone.

Although the tool of this machine tool can process the metal below 105 after the replacement of four points compared with the original, but when processing more than 101 metal, the loss of the machine tool is very large, and it will not take much time to be completely scrapped, but fortunately, Zhu Lei They do not expect this machine tool to run for a long time, as long as they can stick to Zhu Lei, their own mother machine in the factory is made thank God.

When the workers transported these smelted special metals to the side of the machine tool, Zhu Lei and they also came to the side of the machine tool, but this time the processing of special metals is the old man Zhang himself into battle, for the processing of these special metals of the old man they are not at ease to hand over to others to operate, and all the metal processed out of these metals are important parts of the mother machine, the precision required is very high, maybe only one of the hundreds of parts can be used, but fortunately, the other useless ones can also be remelted.

And this machine tool is non-CNC, more in line with the old man's taste, so that they can play their craftsman strength, if it is CNC, then they have no way, can only rely on luck to produce, but manual is the processing is relatively slow, sometimes a few days to be able to process a part, but the pass rate is relatively high, after all, non-CNC machine tools are very test of the worker's technology, And the things produced by a first-class worker will even exceed those produced by high-precision CNC machine tools, and the old man they are the first-class of the first-class, so they are absolutely sure of these, so he rushed to say that he wanted to re-copy the original mother machine in half a year, this is not that he said big words, but Mr. Zhang They really have this strength.

The old man carefully operated the machine tool to process this part, these parts have been cast into the blank of the parts in the previous metallurgical process, but even if it has been cast into the blank, it takes a lot of time to process it into real parts, the sharp turning tool operated by the old man on the high-speed machine tool is on the special alloy, and the squeak of the circle cuts down the wires, so that these black blanks reveal the true color of these alloys, these alloys are not the same silver-gray as ordinary steel, Instead, there is a little bit of golden light in the silver-gray color, which makes these metals very beautiful, so these alloys are also called gold essences.

These gold essences are not the special metals used by the old man to build the sword last time, the last metal is a very brittle but very wear-resistant metal, it is the No. 3 metal in the factory, and most of it is used in the bearings of machine tools and other equipment.

After all, the raw materials of these metals are not cheap, because the price of raw materials for these alloys is very high, and the storage capacity in Daming is not very much, so he wanted to purchase these raw materials in the mall before, but now it is the first time to start construction in order not to cause others to buy some at a very high price, but he will definitely buy it in the mall in the future, because there are too few of these things in reality, And he will use a lot of these raw materials in the future, and in reality, human beings have not stepped out of their home planet, and the storage of these things on the earth is indeed very small. In order to save material, this waste material must also be recycled.

Looking at the old man's meticulous processing of this part, Zhu Lei knew that this part could not be processed all at once, after all, this is not assembly line processing, and the process is processed separately, so it will be much simpler, and all the processes of this part will be completed by the old man himself, and the structure of some parts of this part is very complex, and these places can only be processed little by little by the old man's feeling. Whenever the old man will stop the machine and test the processing place with the precision instrument on the machine tool, and then turn on the machine to reprocess, or process the following process, the old man's processing will not be completed until the afternoon when he is about to get off work, and the old man in the middle has not rested except for going to the toilet and drinking a little water. The processing industry of this part went more smoothly than expected, and the first one did it to the extent expected, and it has fully reached the standard on the drawings.

When Mr. Zhang wanted to continue to pick up the next part and prepare for processing, Zhu Lei stopped him: "Grandpa will get off work soon, and you have been processing for a whole afternoon today, so continue tomorrow!" ”

After all, now that the old man is so old, and he has been concentrating on processing for such an afternoon, if there is any accident, then Zhu Lei's loss is not something that a little money can make up for, and the recovery of the factory will also be greatly delayed, and it may even affect the replication of the mother machine, so he must not be allowed to continue today.

"Xiao Lei! Now there is still a while before the end of work, I want to process a little more, plus if it goes well at night, you can process another part, and the parts of the processing shop can be copied out a day earlier. The old man said.

"Grandpa Zhang, your body is still important, and we have been waiting for so long, and we don't care about the past two days, so your body is still important, I don't want to hear that grandpa your body is tired when the mother machine is built, so grandpa, you have to pay attention to your body, I am still waiting for you to develop this factory into the largest military factory in China?" Seeing that Zhang Lao looked unwilling and wanted to continue working, Zhu Lei immediately pulled him to the outside of the workshop.