The lithography machine project has been officially launched for a few days, and the scientific and technological workers from various units have worked together to make the project a success.

Li Hao looked at the new technology in his hand, and he had been looking for technology in the library for the past few days. Living up to expectations, this technology was finally found.

The two most critical accessories of the lithography machine are the light source for processing chips. One is a grating that guides the optical path.

Now the material of the grating, Director Guo Jianhao, is working hard to manufacture.

After Zhou Yunsheng made a request to the above, the Chinese Academy of Sciences immediately equipped them with a large centrifuge.

It turned out that Li Hao thought that the state wanted to monitor this equipment. As a result, they only added a positioning system to this centrifuge. It is not allowed to move after it is fixed, and it needs to be reported for each move.

Li Hao didn't want to waste his limited energy on the simple technology of finding a light source. However, the Institute of Optics of the Chinese Academy of Sciences is too weak, and the young people sent are all fresh graduates.

There are no technical reserves at all, so we can only start at this stage. At first glance, it is to let them cultivate talents. This director is too chicken thief.

What kind of light source to choose for the lithography machine, Academician He Wanming has no choice, so he can only try them one by one.

Li Hao didn't want to wait so hard, he took the initiative to go to the library to find similar technology to alien civilizations.

The reason why he was in such a hurry was that Zhu Yanbo had told him. Now there is no longer a valuable lithography machine. More than a decade later, quantum technology is also booming. By then it was too late.

Li Hao looked at the technology that had just been translated in his hand, and he smiled confidently. This is a light-wave superposition technique.

Using two light waves of different frequencies, through a certain technical technique, the light waves emitted by them are superimposed. This technology perfectly solves the problem of light source selection in today's lithography machines.

Li Hao can now take the results of this technology research and development on his own. This is all due to the company's current research support system.

He put a lot of effort into setting up a scientific research support system. It is still in its foundational stages, and there is a complete disparity between the resources and the results obtained.

But the reason why Li Hao still continues to invest is that in addition to the level of artificial intelligence in the future. Especially after the breakthrough of quantum technology, this system can play a huge role.

Another important reason is that he took out the technology in the library, which can be said to have been developed with a scientific research support system.

This technology can completely cover him up with technology. It takes tens of thousands of experiments to develop a real technology in the scientific research auxiliary system, and the power consumption alone requires more than 200,000 yuan.

It's all a matter of luck, but it can really create a technology out of thin air. Even if the odds are small, it's enough to cover him.

But Li Hao operated the background through the parrot and made a fake technical implementation path very simple.

After Li Hao prepared this technique, he asked the bodyguard to take him to the laboratory.

The laboratory is located in Chaoyang District, but also in the city center. They arrived shortly after driving.

Li Hao did not disturb the scientific staff of the project, he walked directly into the laboratory.

Ninety-five or nine percent of the staff in the laboratory are recruited by their company. Among them, the researchers responsible for research and development are mainly members of the materials and chemistry laboratory led by Guo Jianhao.

The engineers of the R&D equipment are mainly employees of the electronics company in charge of Sun Kai.

Li Hao directly found Sun Kai, the person in charge of the lithography machine project. He was appointed as the person in charge, mainly because the lithography machine is a complex machine.

Like Guo Jianhao and He Wanming, after they get the materials, they will no longer pay attention to how the lithography machine is manufactured.

Li Hao came to Sun Kai's office and saw him sitting in front of the computer, constantly checking the information.

When Sun Kai saw Li Hao come in, he immediately put down the work in his hand. Said respectfully to Li Hao: "Mr. Li, what is the matter with you coming to the laboratory." ”

Li Hao didn't come up with the technology, but asked Sun Kai: "How is the lithography machine project progressing now?" Are the experts supported by the Chinese Academy of Sciences working well with us? ”

Sun Kai immediately replied: "Now the lithography machine project is moving forward steadily, and no major difficulties have been encountered. We can solve the technical problems we encounter now.

The personnel of the whole project are still in the run-in stage, that is, there is artificial intelligence to assign tasks to everyone. However, the progress of some collaborative work is still very slow, and they need to slowly become familiar with it.

The experts from the Chinese Academy of Sciences who supported us, Heqi, came to learn, and they were very good at learning and fighting.

Those who are engaged in materials in Shanghai have begun to be fascinated by scientific research auxiliary systems, and have been developing new materials in the system, but there is no harvest yet.

Feng Fengfeng is a woman with a very high level, and now she has basically solved the problem of chip transmission of lithography machines.

The most surprising thing for us is Uncle Zhu Ermao from Tianjue, this old expert is not very good in theory, but the experimental operation is really strong.

I asked a lot of engineers with rich theories to assist him, and they used soil methods to match the current scientific and technological theories, and they have come up with a positioning system that is very difficult for lithography machines.

Although this system is very crude, after being optimized by engineers, it should be able to reach the international advanced level. ”

Li Hao couldn't help nodding while listening, and he said approvingly: "You have done a good job in the lithography machine project, which is very good."

How did we get in touch with Professor Wang Rongzhe of Tsinghua University? ”

Sun Kai said helplessly: "Professor Wang's mind is on his carbon-based chip. There are only requirements for our lithography machine project, and most of his requirements are too difficult to achieve.

The main reason is that the requirements for the light source are extremely high, and it is necessary to have a laser with strong penetrating power. It is also softer on the chip, and the processing time must be controlled within seven carbon atom oscillation cycles.

Even Academician He Wanming is helpless about this requirement, which is too demanding. All lasers today do not meet this requirement. ”

Li Hao smiled, and he drew a pattern in the air with both hands. I only saw a virtual light curtain immediately appear in front of him.

It shows a laser emitter, which emits the same laser as the one that Professor Wang Rongzhe needs.

When Sun Kai saw this situation, his eyes widened and he said, "Mr. Li, you have quietly solved the most difficult part of the light source of the lithography machine. ”

Li Hao said with a smile: "This is also a coincidence, I use the scientific research assistant system to calculate, and I see the rainbow outside the window when I am bored." It occurred to me that light is made up of seven colors of light.

I was thinking that since light can fuse with each other, lasers must be able to do it too.

Billions of calculations are performed through a scientific research support system, coupled with my constant experimental correction of data in the laboratory.

Luckily, I was able to develop this special laser that can be stacked on top of each other. ”

Sun Kai looked at this technology, his hands were trembling with excitement, and he said in surprise: "With this technology, we have made breakthroughs in several core technologies of lithography machines."

I am confident that we will be able to complete the lithography machine project before long. ”

Li Hao encouraged him: "Don't be afraid to spend money, overcome all difficulties." Try to develop a high-performance lithography machine, which is our company's competitive machine. ”