Operate the submarine into the cave that was previously opened on the bottom of the sea, and then remotely control the robot 1 across the beach to the road, make a taxi call and tell the taxi company the location, and after a while a taxi arrives on the road. Pen "Fun" Pavilion www.biquge.info

"Sir! Where to go? The taxi driver asked, rolling down the window and sticking his head out.

"Go to XX Town, XX Road, No. XXX!" Zhang Tao said while operating Robot No. 1 and getting into the car.

When the taxi arrived in town, it turned a few streets and drove to a residential area on the outskirts of the town, stopped in front of the courtyard of a villa, and Zhang Tao got out of the car after operating Robot No. 1 to pay the driver and a little tip.

The yard has not been here for a year, and there is some dust on the ground, and there is some dust on the ground after opening the door, and there are no footprints found in the house, it seems that the town is very safe and secure, and there are no thieves to patronize.

Remotely controlled Robot No. 1 to clean the house, closed the curtains, and controlled Robot No. 1 to take out the charger from his bag, lay down next to a bed near the socket, and rushed to the power, even if no one could enter the villa, Zhang Tao would not be careless, and be careful to make the Wannian ship.

The next morning, after breakfast, Zhang Tao walked in the yard for a while, came to the computer room of the factory and remotely controlled the robot No. 1, unplugged the charger and put it in his bag, and then came to the yard to find a broom to clean the yard.

After cleaning the yard, I looked at the time at eight o'clock in the morning, and remotely controlled Robot One, picked up the mobile phone and called Jack.

"Mr. William!" Jack said in surprise after the phone was connected.

"Hmmm! It's me! I'm in Scotland now, are you in the factory? Zhang Tao said with a smile, and the voice was remotely transmitted to the robot's mobile phone half a second slower than normal speaking, but it also matched the mysterious impression maintained by Mr. William.

"Oh! I'm in Africa right now, there's a tribe that needs a batch of bazookas, it's a big order I'm talking to the chief, I'm going back in two days, if you're in a hurry I can go back to Scotland now. Jack said.

"No, you don't! You can go back normally, I have something for you!" Zhang Tao said.

"Good! Mr! We'll see you in two days! Jack said.

While Robot One waited in the villa for two days, it prepared the materials needed to make the star core converter, and the metal materials needed to make missiles at the No. 1 Island Base also began to be preliminarily smelted.

Two days later, in the morning, Zhang Tao remotely controlled the robot No. 1 and drove to the military factory, the car was bought when he bought the villa, and he usually put it in the garage of the villa, and after driving to the door of the military factory, Zhang Tao saw Jack and several people standing at the door and looking at the car.

"Sir!" Jack greeted him, opened the car door and said.

"Jack!" Zhang Tao said with a smile, operating Robot No. 1 with a smiling expression.

"Boss...."Several company executives around Jack greeted with smiles.

"Hmm!" Zhang Tao said as the controller robot smiled slightly, nodded his head, and walked towards the courtyard of the military factory.

After arriving at the building of the military factory, Zhang Tao asked the others to disperse, and Jack and Robot One went to the president's office.

"Jack, this is the Patriot missile's supporting facilities manufacturing disc! You gather the engineers to study it, and we'll have one more valuable thing in the future."

"Sir, this....!" Jack stammered in surprise when he heard this.

"That's right, this is the companion of the Patriot missile, and it's the latest Type III. As for the missiles being produced elsewhere, wait until they are sold and sell them together! Zhang Tao said with a smile.

"Oh! Oh, my God! This is the American Patriot-3 missile! One is worth $3 million, which is equivalent to more than 3,000 bazookas! Jack said in surprise, with little stars in his eyes.

Zhang Tao didn't speak, so that Jack could ease his mood, and after a while, Jack exhaled and his expression returned to naturalness.

"I'm sorry, sir! I lost my temper! Jack said embarrassedly.

"It's okay! You may be even more surprised in the future, and you may also be in the business of nuclear missiles in the future! Zhang Tao said.

"Sir, you must be from a big family! Such advanced weapons can be obtained! Sorry, sir! I didn't ask what you meant! Jack said.

"It's okay! You'll find out who I am! Well done! Your future is vast! Zhang Tao said as he operated Robot One and gently patted Jack on the shoulder.

"Sir! Rest assured! I'm going to do a good job! Jack said excitedly.

After chatting for a while, Zhang Tao operated Robot No. 1 and stood up and prepared to leave, "Sir! Are you leaving? Jack said with some reluctance.

"Yes!" Zhang Tao said.

After finishing speaking, Zhang Tao operated Robot No. 1 and walked towards the door, and Jack quickly stood up and sent Robot No. 1.

After Zhang Tao operated Robot No. 1 and drove a car back to the villa, he closed the door and entered the house to overhaul all parts of Robot No. 1 in the bathroom, and then charged it to a full battery, and then took a taxi to a location near the landing beach with the remote control of Robot No. 1 at night, and then operated Robot No. 1 after paying the car and tips, and then operated Robot No. 1 until the car was far away and walked towards the beach, and at the same time remotely controlled the submarine in the submarine cave and floated up, releasing a small submarine and driving towards the shore.

After the small submarine returned to the submarine cave, it operated the robot No. 1 to get out and walk to a corner of the submarine to fix it, and then operated the robot in the submarine to refuel the diesel engine in the stone door, and after leaving some diesel fuel in the storage room of the cave, the submarine was remotely controlled out of the submarine cave and drove towards the route from which it came.

After operating the submarine and returning to the No. 1 island base, Zhang Tao began to make the star core energy converter, first constructed the drawings in the computer software, a round container was drawn, there was a small rectangular gap in the middle position, and the case of the ball was drawn with several T-shaped grooves, and the ball was designed for the installation position of the star core.

Zhang Tao drew a large square that can contain a circle as the shell of the star core energy converter, after the drawing was completed, he came to the laboratory, and now put some insulating materials into a modified miniature forging furnace, input the shape of the drawing into its computer and press the switch, and after ten minutes, the square model cast in the forging furnace cooled.

Pour some insulating, wear-resistant, and corrosion-resistant materials into a new miniature forging furnace, and press the switch after entering the size to be processed in its computer, and the materials in the forging furnace will melt after a while, and then form a central square surface spherical shape under the movement of the manipulator.

After waiting for an hour, the ball was cold, Zhang Tao picked up the square star core glued with viscous material and put it in, looked at the size and took out the star core, and then put the ball on a miniature five-axis linkage machine tool, cut the surface of the ball according to the drawing, and then polished the T-shaped groove.

Next, the material used to process the balls is poured into a new micro forging furnace, and several special cylinders are forged, and after these cylinders are cooled, several cylinders are hollowed out with a micro five-axis linkage machine.

Holding a cylinder into a T-shaped groove and sliding a few times, it fits very well and the gap is not large, in line with the effect of the design, Zhang Tao poured the substitute of the star core associated material into the hollow space of the cylinder, and then sealed it with a viscous material hollow.

After putting the star core into the middle of the ball, spread a piece of paper on the top of the ball, and the paper was immediately floated by the anti-gravity force of the star core, and a cylinder was put into the T-shaped groove and rotated, and the paper above the ball bulged up with the rotation of the cylinder, and it was successful!

After inserting a cylinder on the left side of the sphere, this star core energy converter is more than half done, and the rest of the outer packaging is much simpler. Input the dimensions of the finished star core energy converter into the computer and save it, and if you want to make it big or small in the future, you can reduce and enlarge the size accordingly.