Chapter 427: Industrial Machine Tool (2)
Chapter 427: Industrial Machine Tool (2)
"This plant passage, which acts as a factory, is fifty kilometers below the Dyson settlement, and should be ten kilometers below the surface of the endless sea. In order to have sufficient production space, the passage has undergone a specific transformation www.biquge.info pen & fun & pavilion. The passage in front of you is just the heart of the plant.
Here, the industrial machine is unfolded, and then the basic industrial machine is printed out using the atomic reshaping machine according to different production directions. These industrial machines continue to expand deeper into the tunnel, using the smelted alloys to produce more compact industrial lines. These functionally different production lines are then extended in secondary aisles to produce specialized parts, which are then sorted into final products using parts in assembly plants that do not end in one direction.
It takes two hours for the entire machine to be fully rolled out, after which the Atom Remodeling Machine takes a week to reshape most of the primary industrial machines, and the rest of the industrial machines are built by pre-printed machines.
In the next two months, the main weapons production line and energy plant will be manufactured with sufficient resources to produce parts made from industrial machine tools, and then ready for commissioning and production. However, before that, it is possible to build industrial robot production lines, metal smelting plants and other supporting facilities.
Of course, energy factories and metal smelters can also use gold-swallowing vines and biocrystals instead. However, due to the safety and stealth of the operation, I do not recommend planting biocrystals in large quantities. Biocrystals are ultimately similar to silicon-based life, and they will inevitably be unnoticed by the Cone who is unaware of the hidden shadows.
For the materials we use in the Dyson world, it seems that the main ones are energy-conducting crystals and M1T33 alloys, and the secondary parts are replaced by synthetic materials such as engineering plastics and special ceramics. Engineering plastics we can synthesize by manufacturing plastic factories. It has been proven that there are large quantities of fossil fuels such as oil and gas in the depths of the endless sea, which can provide sufficient raw materials for our plastics factories.
The raw materials of special ceramics are also relatively easy to solve, and a large amount of sedimentary sediment is accumulated in the flat shallows of the magma sea, which can be synthesized by adding other raw materials after preliminary screening. There is nothing wrong with the rest, the energy smelting process of the interstellar age has greatly simplified the production process of these materials, simplifying our production process.
M1T33 is a degaussing alloy that is mainly used to make shield generators for electromagnetic shields. It is a foundational alloy that was synthesized by humanoid scientists during the thirty-third cycle of the first epoch of the Galactic Alliance. As long as the composition is trititanium, aluminum, copper 33 and other rare metal materials.
These raw ores are relatively common in the current formation, and there is no problem with the supply of raw materials, and if it goes well, our factory will be able to produce the first batch of weapons and equipment in two months. While Mingcang was busy unlocking the industrial machine tool, he gave a brief introduction to Cheng Mingli and the four of them.
"Very good, but our weapons are simply discounted here, and we have to use a weapon that adapts to the environment of the Dyson world, have you thought about the weapons you want to produce?" Zhu Liheng asked.
"Of course, it's still a particle weapon, since this weapon can be promoted by the Dyson people as a general-purpose weapon, I think it will be effective against the so-called Celestial people. What we need to do is to further strengthen the power of this weapon to achieve the purpose of enhancing the power of the weapon.
At this point I already have an eyebrow. I intend to borrow the particle weapons of the Lexon civilization as a sample for the new weapon. The Lesen civilization is a fourth-level civilization among the 537 member civilizations of the New Galactic Alliance of the Golden Crow Fleet, and this civilization has only recently entered the threshold of a fifth-level civilization with the help of the earthlings.
The Lexon civilization is unique in particle weapons, and the manufacturing drawings of this particle weapon are stored in our industrial machine tools. However, the form of the Lesen is very different from that of humans, they have six arms, no fingers, and only a pair of lobster-like pincers on each arm. Because of this, their weapon looked more like a horn that had been circled several times, and a dozen buttons were lamely attached to the arcs.
Therefore, this particle weapon cannot be used by humans, and must be modified before it can be installed. I've made a preliminary improvement to the style of this particle weapon, designing it in the form of a cold weapon spear, and named it a particle gun. Broadly speaking, this particle weapon is very similar in appearance to Gabar, with the only two differences being the addition of an overclocked concussion head for piercing and a change in the way the weapon is fired.
The particle launcher used by the Particle Gun is similar to Gamma, and is an element with the same period as 3501. I believe that this is easier to find in outer space. The bonanza area that has been identified is on satellite 2, and we can send someone to reconnoiter it if we have time.
If the situation allows, avoid the eyes and ears of the Cone and build a secret mining site on it. In order to increase the power of particle weapons, we may also need Krypton catalysts. When mining, it is important to remember to harvest half of your krypton as well.
In addition, in order to further enhance the power of the particle gun, a mini-fusion reactor with a diameter of five centimeters was added to the middle part of the particle gun. The energy generated by the reactor can be used to excite high-energy laser weapons, as well as strong gamma rays.
Laser weapons and gamma rays are theoretically a type of particle weapon, and it is thought that they should also have a certain lethality against the enemy. This is a spare weapon to prevent combat in times of supply shortages, and should not normally be used.
These are just individual equipment, and we may also need armor specifically designed to protect against particle weapons, particle cannons with strong protection, and other supporting weapons of mass destruction.
On top of that, we'll probably need war vehicles. Since it is not yet known what the terrain on the ground looks like, we are not yet able to design a war vehicle that adapts to the combat terrain.
However, we have to build some spaceships for space warfare, and considering the particularity of the Dyson world, the battleship does not need to be too big, less than two thousand meters. Refer to the style of Dyson's spaceship, make appropriate weapons and armor enhancements, and increase the thrust of the engine by the way, "Ming Cang is definitely a qualified purple-collar engineer, and after having an industrial machine tool, almost everything in the follow-up has been calculated clearly.
"Anything else you'd like to add?" Li Merson asked after a moment of thought.
"Why don't you use energy weapons? Compared to particle weapons, even B-class energy weapons have very obvious advantages. Particle weapons are very dependent on logistical supplies, not to mention the rest, and the consumption of firing charges alone is a lot of money.
Looking at energy weapons, the dependence on logistics is extremely low. Before the battle, each soldier was given fifteen standard energy bars, which was enough for the soldier to fight for three months. These Dyson people's individual equipment does not have the ability to store space, and when the time comes, they may use backward military backpacks or combat auxiliary robots, which is very severe pressure on logistics.
Moreover, Lieutenant Cheng Mingli has proved that the use of force energy weapons in the Dyson world is not affected by the strong magnetic field environment, and we are completely satisfied with the use of energy weapons instead of particle weapons. And we have a very mature production line design for energy weapons, which is very convenient in terms of manufacturing and maintenance" At this time, Linhar, who was standing behind the three people, suddenly asked strangely.
"The reason for this is simple, because so far we haven't found anything in the Dyson world about the Energy Crystal Mine or anything like that. Doesn't it seem too abrupt for an army to suddenly appear using energy weapons? ”
"Uh...... This one...... It's also true" Linhar, who finally inserted the topic, flicked his tail in embarrassment, and even his blue cheeks changed slightly.
"Tick! …… The activation of the resuscitation program begins, and the intelligent program wakes up......" With a slight energy humming sound, the industrial machine finally began to activate. The six sides of the real metal block start in the middle and split outwards to form a regular flat surface that is laid out on the ground.
After a burst of light, the six planes are connected to each other, and there is no longer the slightest gap. Not only that, but with the unfolding plane as the center, the plane began to expand in all directions, until a square alloy platform covering an area of 250 square meters was formed.
Then, probe-like metal probes grow from the platform, with undulating probes of varying colors, even of different sizes and shapes. These probes are the working parts of the atom remodeler. As you work, the reconstructed atomic stream is ejected from the probe and the required machine is printed out from top to bottom.
Underneath the platform, several barrel-like probes slowly begin to extend as the industrial machine levitates, and these probes are where the disintegrating rays of matter are fired. The rays emitted by the probe reduce the object to the base particles, which are absorbed by the mother machine and then transmitted to the atom remodeling machine above the mother machine.
"The interior of the industrial machine uses space expansion technology, which does not look big on the surface, but in fact the main part is hidden in the folding space. This is the first time that the Institute of Mechanical Engineering has tried to use space technology to reduce the size of the equipment, but it has not been very successful so far. Even with his best efforts, the height of the machine has been reduced, and the size has not changed much," Ming Cang kept clicking on the stereoscopic projection, as if checking the unfolding of the mother machine.
"So how tall should this mother machine be?" Cheng Mingli looked at the suspended platform in front of him and asked curiously.
"Depending on the mother machine, it's probably between 50 and 300 meters," Ming Cang replied after careful consideration.
"So is this still called unsuccessful? Now this industrial machine is probably not even five meters high," Cheng Mingli was mad.
"Tick...... Intelligent industrial machine tool Luban III type number 00113 serves you...... "With a burst of streamer rotation, on the metal platform, a figure of artificial intelligence appeared...... (To be continued.) )