"Sonny, get ready, I'm going down and have a look."

"Sir, please don't make such a risky move." Hearing that Lu Yuan planned to go down to check in person, Sonny dissuaded.

"It's fine."

Lu Yuan waved his hand and said in a deep voice: "Since there is such an abnormality in the USB flash drive, I can't help but take a look at it, just be fully prepared." ”

He said it to such an extent that it was obvious that Sonny could not stop it, and Sonny had to give instructions to prepare.

"By the way, did you make what I asked you to do before I left?"

Thinking of something, Lu Yuan asked.

"I've finished the prototype, do you need to take a look?"

"Well, let's take a look first."

If Area A is an area for material storage, mechanical processing, and production, then Area B on the second floor is a comprehensive large-scale area for living, resting, eating, storage, medical treatment, and laboratories.

Area B-211 has 245 separate partitions, which can accommodate nearly 1,500 regular personnel to live, rest, and eat.

Area B-222 is home to a more advanced medical facility in the future, which can automate most surgical procedures and the treatment of many diseases.

Area B-233, a high-level residence, can accommodate 565 people in a high-specification space.

Area B-244, the experimental area, where a variety of biological and pharmaceutical research and development work can be carried out.

Area B-255, a super-large centralized quantum host storage site, has the ability to operate independently from a single power supply for 12 hours in times of crisis.

Area B-265, Mechanical Improvement and Experimental Product Test Site.

Area B-275, equipment storage and weapons storage area.

Area B-285, Biological DNA and Seed Sample Bank.

Each sub-area is equipped with an independent access control system. The heavy steel door provides an airtight seal against chemical, biological, toxic gas and nuclear radiation, so that even if there is a problem in one sub-area, it will not affect the others.

Coming to Area B-265, the robot NS-5, which has been temporarily converted to automatic maintenance and processing, can be seen everywhere. On top of the original humanoid foundation, they are equipped with six Belheath multi-purpose mechanical tentacles in the back, which can transport 36 types of stylus of different sizes, easily pinch the smallest pins, and can pass the fine wire through the pinhole in 100% 0.001 seconds.

The entire undersea underground base in the South Pacific Ocean is indisputably owned by Lu Yuan in principle and in law, and out of future needs and the need for novel toys, he has formulated a lot of "novel toys" for development.

One of them is exoskeleton armor.

In the world of mechanical public enemies, most of the human military uses military robots. But that doesn't mean there are no human uses. In some application scenarios that are not suitable for robots, exoskeletons emerge spontaneously. Especially after more than ten years of development, exoskeleton armor is not only used in outer space scenarios, but also suitable for many complex mixed environments such as engineering development, harsh environments, and exploration tourism.

With this prerequisite, it was impossible for Lu Yuan to ignore the exoskeleton armor.

NS-5 is indeed a very good multi-purpose robot, which can be used in various environments, but it can only be used quietly and not by the outside world, and it is not suitable for taking it outside. The performance of the NS-5 is simply appalling. However, exoskeleton armor is different, as long as the specifications are appropriately reduced. It's much less difficult to accept, and it's not too ostentatious.

How to reduce the specifications is very simple, it is rare to use the exoskeleton armor for industrial use for military use, and it is necessary to modify several aspects.

At present, Lu Yuan has handed over this to Sonny to be in charge, and according to his requirements, there will be three prototypes. For Lu Yuan to make the final decision.

All sub-zones are divided according to level and importance, from the low-level Safe to Hram, Danger, Catastrophe, and finally Perdition.

Area B-265 is classified as Class D, and the security and access control systems are extremely tight, even though it is the owner of the base, Lu Yuan. DNA and iris verification are also required, and with gait analysis and skin texture verification, a passage is required to reach Area B-265.

"Woo ......"

The alloy door opens under the operation of the hydraulic system, exposing the space inside.

This is quite a large space, Lu Yuan took a few steps forward, and the position where he stood was a protruding platform, and below was a large space that was nearly fifty meters wide and more than two hundred meters long.

Although the space is large, it is not empty, on the contrary, it is full of instruments and equipment from another world, and even a few fully automated 3D printers, different from the conventional cumulative manufacturing technology, the 3D printer here adopts a collection of nanorobots, after inputting digital model data, it can quickly process and transform special metal materials and plastic materials with a collection of nanorobots, and its accuracy can reach 10nm level.

With these 3D printers, as long as Lu Yuan obtains the EDI maintenance procedure manual, he can carry out maintenance measures by himself in the future, without worrying about parts failure and scrapping due to failure to maintain after multiple flights.

Of course, the larger use of several 3D printers here is still for the experimental manufacturing and production of various equipment and weapons.

Walking down the stairs next to him, Lu Yuan followed Sonny, one person and one machine came to the bottom, and stopped in the semi-circular display area. Here, three exoskeleton armors that have been produced are quietly placed on top of metal supports, waiting for the arrival and inspection of the new owner.

Different from the power exoskeleton developed in the outside world today, the exoskeleton armor itself is fully enclosed, like an airtight armor, which is quite different from the HybridAssistiveLimb (human auxiliary prosthesis), which is commonly known as the power exoskeleton of the enhanced wearable machine, which is quite large.

The power exoskeleton itself is limited by technical conditions, and DARPA's requirements are only to increase the power of soldiers, so that they can run faster and farther, and can carry more supplies, but there are currently no plans to make the power exoskeleton defensible.

The exoskeleton armor produced here is based on the prototype of a space engineering machine from another world, with a height of 2.5 meters, fully enclosed welding, up to thousands of sensors, equipped with an independent survival system, a variety of multi-purpose integrated aircraft with gas circulation processing, emergency medical treatment, and short-term defense capabilities, codenamed Silvertip-1 (Grizzly Bear).

The second body is much thinner, and it is basically made according to Lu Yuan's size, with a height of 1.85 meters, thinner and fitting armor, and more muscle pressure sensors and electromyography sensors, which are much more flexible in speed and agility than the "Grizzly Bear". However, limited by the size, the exoskeleton armor codenamed Foxhunts-1 (Fox Hunting) naturally has no breathing and circulation device, no emergency medical treatment system, and even the defense ability is not too strong, of course, this is not strong compared to the "Grizzly Bear", with the materials used in the "Fox Hunting", even the close-range rifle set shooting, almost all belong to the ineffective category, only the anti-materiel sniper rifle can break its armor.

The third body, strictly speaking, does not belong to exoskeleton armor, but should be classified as a power exoskeleton, which is the first generation of HAL-1 human auxiliary prosthetics that Lu Yuan asked to develop, but it is still quite different from the power exoskeleton in the outside world.

Based on defense-based thinking, although HAL-1 did not develop a large area of armor to cover the human body, instead used a bulletproof vest made of carbon nanotubes on the chest, and cooperated with an AR monocular device to assist in operation calculations.

Compared to the "Grizzly Bear" and "Fox Hunting", which were taken out with a slight modification of the original aircraft, and already had a mature design, Lu Yuan was not worried, and his attention was more focused on HAL-1, which could be used by the outside world. (To be continued.) )

PS: Ask for a reward, ask for a ticket......