"Grown, it's actually about the new magic machine tool...... Whether it is the Magic Research Institute or our Magic Machine Tool R&D Center, we have already had some more mature ideas. However, in terms of specific research and development, we have encountered a very important problem, and this problem is almost impossible to solve......"

Seeing Camby's embarrassed look, Xu Yi didn't think about it, and immediately interjected: "It's a material problem, right?"

Camby was stunned and hurriedly responded: "Yes, it's a material problem." President of the company, your requirements for the new magic machine tool are mainly to improve the various power of the magic machine tool, I understand your idea, is to rely on higher specifications of the magic machine to create a more powerful magic machine. ”

"Yes, if the specifications of the magic machine are too low, we will be limited in what we want to build a large magic machine. So the problem of the magic machine must be solved first. Xu Yi nodded.

Camby smiled bitterly: "But after the various powers of the magic machine tool are improved, the requirements for materials have become much higher. For example, some time ago, when we were developing a new medium-sized magic stamping machine, the machine could only withstand no more than 10,000 stampings at most, and there would be a crack in the strict zhòng and it could not continue to work. ”

"Ten thousand times?" Xu Yi frowned. "That's a little too little, aren't you?

"I have thought about it, for example, covering the outer layer of the magic machine with soft mud to counteract the vibration force and slow down the impact on the machine tool, but the effect is not obvious. Camby sighed. "At the end of the day, in order to achieve the due stamping effect, then the machine itself must withstand the corresponding stamping force, which cannot be avoided. So in the final analysis, the only way to solve the problem of the material itself for casting the magic machine tool is to solve the problem. ”

Xu Yi also smiled bitterly: "No way." There's also nothing I can do about it. Materials research is something that cannot be rushed. There are no shortcuts. ”

Every time I discuss the material with Camby and the others. Xu Yi regretted that when he was on Earth, he didn't learn more about materials science, so that he couldn't use the experience on Earth to promote the development of the Xinfei Chamber of Commerce in this regard.

However, materials science is broad and profound, and even if Xu Yi had this idea at the time, I am afraid that he would not have the time.

Now that he was able to use his knowledge of mechanical engineering to build the New Flying Chamber of Commerce in Bangta City in just over three years, it can't be said that this is wrong.

At the end of the day, the industrial system is incomparably complex, and it is far from being something he can do alone.

"The good thing is that we now have a lot of non-ferrous metals. As long as I do a lot of research, I think I can always make a breakthrough in materials research and find the right alloy to create this kind of magic machine that needs to resist strong impulses. Xu also comforted Camby. "For now, let's do our research in a limited way. ”

"That's all there is to it. Camby nodded, and then became excited again. "But President, the research on the new magic machine is not all bad news. ”

"Oh, so there's still a breakthrough. Is it the problem of the fast movement of the magic lathe that you mentioned last time, or the precise positioning of the magic press that Portrou talked about last time?"

"These are all minor issues, how could I report them to you. Camby shook his head. With a smug face, he said, "Actually, you mentioned it countless times before. Problems with the automatic control of the magic machine tool. ”

Xu Yi was stunned, and then he was surprised: "No, isn't it? Could it be that the self-controlled magic machine tool you have developed? How is this possible!"

"Hehe, just come with me. ”

Xu Yi followed Camby to the actual operation workshop of the Magic Machine Tool R&D Center with an unbelievable face, and saw a brand-new Magic Machine Standing in the middle of the workshop, and the dwarf Portru was holding a one-meter-square steel plate ready to put it in.

"Wait, Potru, let the president see. Camby shouted to Portrou.

Portru glanced up at Xu Yi, stopped what he was doing, and waited for Xu Yi and Camby to come to the side of the magic machine machine, and then used a relatively slow movement to stuff the steel plate into one of the card slots of the magic machine tool.

The plate was just in the card slot, and Potru pressed a button on the Mana machine, then took two steps back, indicating that he was completely out of the way.

Xu Yi saw that the magic machine automatically started, sent the steel plate in the card slot out, and then cut off a semicircular corner by a slice.

After completing this process, the card slot of the magic machine automatically turns the steel plate in a circle, and moves it next to the slice again, and the semicircular corners are also cut off.

After the four corners of this steel plate are all cut, the card groove drives the steel plate to sink again, and then it is divided into two ends and clamped, and then driven by the two iron clamps, it is slightly folded upwards and slightly bent, and then it is re-sent out by the card groove.

Xu Yi glanced at this steel plate that had changed dramatically in surprise, and then looked at this magic machine tool, and his feelings instantly became slightly excited.

That's right, although the action is still very simple and the process that can be completed is relatively simple, but the whole operation of this magic machine is completely automatic without anyone interfering!

This means that in the future, as long as the research is further deepened, there may be an automatic magic machine tool comparable to the CNC machine tool on the earth on the Sainz continent!

Xu Yi took a breath, suppressed the excitement in his heart, and motioned for Boteru to send the steel plate into the magic machine again.

Portru still did so, and then Xu Yi saw that the steel plate had gone through the same process again and was finally sent out.

Xu Yi put the front and back steel plates together and made a comparison, and was surprised to find that these two steel plates were exactly the same!

He even asked Camby to bring a vernier caliper to measure, and found that the error was no more than 0.1 mm!

Although this is far from those high-precision CNC machine tools on the earth, it is already very amazing for the industrial level on the continent of Sainz.

Xu Yi asked Portrou to repeat the operation several times, and finally compared the processed steel plates, and found that the maximum error of various parameters of these steel plates did not exceed 0.2 mm.

"Great!" Xu Yi couldn't help but shout, and then patted Camby and Portru on the shoulders hard. He excitedly said, "You've done a great job! The productivity of our chamber of commerce will be greatly improved. I don't have to worry about production capacity! Haha, great! I want to commend you on behalf of the Chamber of Commerce! I decided to give you a ......."

"Wait!" Camby suddenly interrupted the excited Xu Yi. "Your Excellency, the biggest contributor to the creation of this automatic magic machine is not us, but Sancheli. If you want to give a reward, you should give it priority. ”

"Sancheli?" Xu Yi was stunned for a moment, and then dug out the person corresponding to this person's name from the depths of his mind. "It turned out to be him, no wonder ......"

Since the last time the magic fountain in the new town square showed a breakthrough in the research of magic programming technology. Sancheli hadn't seen any new research for nearly two years, so much so that Xu had almost forgotten about him.

Unexpectedly, on this automatic magic machine that made Xu Yi very excited and could solve the problem of factory capacity that had plagued him for a long time, Sancheli jumped out without warning.

Xu Yi was stunned for a while, and then asked Camby: "You mean, Sancelli, this automatic magic machine is also involved in the research and development?"

"It's not quite accurate to say that he was involved. To be precise, he was the first to come up with the idea of this automatic magic machine. Camby replied. "If it weren't for him telling us that we could set it up in advance through magic and let the magic machine automatically complete some of the set actions, we wouldn't have thought of this at all. And the most important self-controlled magic array on this magic machine was completed by him. So I think the biggest contributor should be him. ”

"Well, we just changed the structure of the Magic Machine accordingly. It's nothing. It's far worse than the self-controlled magic array he solved. The Magic Research Institute also meant the same thing, and felt that Sancelli should be credited. Portroux also said.

Xu Yi thought about it, but suddenly snorted coldly: "Such an important research and development, why didn't anyone come to inform me in advance? Even today, you are about to successfully develop this automatic magic machine tool, I don't know? Don't you take me as the president in your eyes?"

Seeing Xu Yi's gloomy face, Camby and Portru were both startled, and Camby hurriedly waved his hand vigorously and explained, "Elder, don't get me wrong. It's not that we're deliberately hiding it from you, it's just that Sancheli strongly asks us not to reveal it to you in advance. ”

"Yes, Sancelli said that he had been in the Chamber of Commerce for several years, and he always felt sorry for you. If this automatic magic machine is successfully developed, it can be regarded as a reward for you. But if the development fails, he feels even more shameless to see you, so he doesn't dare to let you know at all. Portrou also explained.

"Hmph, does that mean he has the face to see me now?" Xu Yi still looked unhappy. "Since he didn't dare to take the initiative to see me, then I wouldn't take the initiative to find him. You tell him for me, and when this automatic magic machine is fully developed, I will give special recognition and rewards to all those involved in the research and development. If he doesn't show up then, he won't show up in front of me in the future!"

After dropping this sentence, Xu Yi turned around and left the Magic Machine Tool R&D Center.

However, after walking less than a hundred meters, Xu Yi could no longer hold back the expression on his face and laughed from the bottom of his heart.

Compared with how much money the Chamber of Commerce makes, he will always be more happy to see the breakthroughs made by the Chamber of Commerce in technology research and development.

Among all the technology research and development, he attaches the most importance to the technology research and development of the magic machine tool, which is the most common and most demanded thing in the industrial system.

Prior to this, the development of the automatic magic machine was only an idea in his mind, because he knew how difficult it was to study the pre-programming technology of the magic array, so he had always been patient with Sancheli.

However, now, Sancelli has secretly cooperated with the Magic Research Institute and the Magic Machine Tool R&D Center to successfully develop the automatic Magic Machine Tool!

No matter how simple this automatic magic machine is, compared to those high-precision CNC machine tools on the earth, it represents that the new flying chamber of commerce has finally taken the first step in this research.

As long as we continue to develop in the future, sooner or later we will catch up with the standards on the earth step by step.

Hearing such a big good news, how could Xu Yi not feel extremely happy? (To be continued......