Gustav began the exercises.

This enchantment is illustrated in a relatively easy way to understand, like drawing in the air with a pen, requiring each stroke to be placed precisely in a given position. Before coming to this plane, Gustav would never have believed that such a thing could be achieved, but after training in mental strength, he found that it was not impossible. It just takes time to perfect and memorize that behavior pattern, but once you get acquainted with it, the coordination of the whole body will be magical.

Gustav conducted a physical drill for the first time, and the last time he operated it, he was still holding a drill airbrush, which was still a little different in feel compared to a real light spray gun.

The power of the light is set, and the reflow principle is used to limit the distance that the light can emit. With a constant power, this corrosion gun works very steadily.

Gustav secured his one-handed shield to the spiral instrument on the console and held the gun firmly.

Thin corrosive rays are ejected, and in the field of view of the special eyepieces, this corrosive light takes on a pale purple color.

According to Gustav's own understanding, if you want to use the etching technique of 'neo-modernism', the first step is to find the base. For example, if he is going to etch the first eight layers of the 'Evil Protection' model tonight, then he must start with the first layer and lay the foundation first.

Etching a single-layer model is not difficult, as Gustav has done many times in his previous projects. Starting from the top left corner of a defined area, Gustav knew that once he started, he had to finish one layer in one sitting, with no pauses or gaps in between. The biggest difference between enchanting and etching arcane models on equipment and using spell slot memory spells in spirits is here: etching in spirits, arcane models are strictly geometrical, straight and evenly wide. When etching is done on equipment, the change in angle at the corner and the pause in the light transition will cause a single point to be thickened, which will actually affect the final result. Only by operating without hesitation and with great skill can this operating error be minimized.

Keeping his breath and his arms calm, he dropped the first stroke without hesitation.

The image of the first layer of 'Evil Protection' in his memory came to mind clearly, and according to the arc of the shield, Gustav began the process of operation. The spray gun in his hand maintained its accuracy very accurately, and the corrosion ray of the spray gun hit the source energy layer, and with the effect of the corrosion ray, that area formed a forbidden nature.

With the actions of the spray guns, the area of the forbidden area began to expand and expand.

The remnants of corroded light will be colored purple by the special eyepiece, and the entire single layer of the model will be clearly visible on the equipment area. The whole operation was silent, but the tension in it made the enchanters who tried high-density etching for the first time feel nervous.

The first layer of substrate is undoubtedly completed, which is the most basic operation, but the difficulty of 'new modernism' does not lie in the confirmation of the first layer. It's about how to carry out the etching of the second layer and the subsequent layers on the basis of this substrate after extending a little thickness upwards.

Gustav breathed softly, calmly turned off the gun and set it aside.

At the same time, he removed the eyepieces. Now, it's time to switch to a different frequency.

In accordance with the operating instructions, he put the eyepiece and the gun back in their place, and then Gustav picked up another set of equipment.

This time, the spray gun ray appeared in the eyepiece field of view in the color of turquoise, and the reason why the invisible light of different frequency bands was used was, of course, to distinguish it from the previous lilac and facilitate the subsequent vertical overlap.

"For the first time, the substrate was designed at a distance of four tenths of a centimeter from the surface of the shield...... The second etching, with an upward boost of about 0.2 millimeters in thickness. Gustav controlled the gun in mid-air, first using his wrist to make sure he had a precise grasp of the distance, and then aimed the gun at the upper left starting point of the limited area again. "Be careful not to let the two intersect. ”

There is a connection serial port between the plane of the first layer model and the second layer model, and these serial ports must form a straight line in space so as to ensure the smooth flow of source energy throughout the model. The general practice is to first determine the docking external docking of the serial port, and then extend and expand it externally. However, in the realm of enchantment, it is the overall fluidity that must be considered, and the principle of reducing errors trumps everything. For this reason, the docking of the serial port must be 'after the depiction is completed, a good response relationship must be automatically formed', and there is no such thing as determining the serial port first.

For enchanters, they had to deal with the dual requirement of maintaining the thickness of the boost and the accuracy of the single layer.

But for Gustav, he simplified the operational requirements.

"If the etching of each layer is error-free, and if the image of each layer conforms to the principle that it is perpendicular to the normal vector of the current face, then I don't need to do much work. To perfect and complete every etch of myself perfectly, I have to maintain this self-confidence. ”

Yes, if the single-layer etching is perfect, I don't need to go through the so-called 'node' review, because the perfect image itself fits perfectly.

It's a simple logic, but it requires strong execution.

............

"Lucia, what do you think of this group of newcomers?" Although Lento Marcus was 'despised' by his daughter, as the owner of the shop, he still had to come here to make a round when it was time to appear.

"The people on the No. 1 operating table etched very quickly, but unfortunately their personalities were a little unsinkable, and they didn't think about the geometric relationship clearly before spraying, which led to distortion in many places. The speed of the person on the No. 2 console is appropriate, but the perpendicular principle of the hand is not well maintained when using the spray gun, and the spray line produces a transition etch at the corner, which in turn increases the area, affecting the overall performance of the enchantment. Number Three's grasp of the thickness after the boost is not in place, perhaps because of some nervousness, so that the thickness between the first and second layers is uneven, which will lead to an imbalance in the overall structure of the arcane model......"

Lento coughed dryly.

"They're all newcomers, you don't have to be so strict, you should find more of them, that's a prerequisite for becoming a shopkeeper......" Lento seized an opportunity to introduce his experience to his daughter with some solemnity.

"Shine point?" Lucia glanced at Lento, "A workshop owner who dumps everything on his daughter and goes out all day and doesn't know what to do, is really confident that he can do this kind of thing in front of me?"

"That's not a ...... It's not 'I don't know what to do,' I'm trying to get business for Marcus' business, you know, business is all about human interaction. Lento turned his head awkwardly, and as if he had noticed something, he decided to change the subject: "What about that Gustav? ”

Lucia was silent for a moment.

"I don't know how to describe him, he's like an infallible inhuman creature, and maybe I should have started by letting him try the 'semi-etched' standard of neo-modernist techniques. Or, let him just start the 'full etching' exercise......"

Lento was stunned, he had the impression that Lucia rarely gave such a high evaluation.