After the expansion of ceramic tiles and toilet basins, the company was able to consume more than half of them, so it was not involved in the situation that the products produced could not be sold.

Garment factories and bra factories must start to expand and build in 86 years, if the original site of the garment factory can not be greatly expanded, then, the factory can be opened to another production of chemical fibers and fabrics in the area, in this way, the procurement of raw materials, there will also be certain advantages.

In 1984, Mulao Lane in downtown Wenzhou was the first open free market in Wenzhou, where the goods produced by the company could be sold, and the goods from there could also be transported to Zhongxin supermarkets all over the country.

Wenzhou is different from other places, this place opened relatively early, and the production of shoes has shown a trend of rising, so to speak, Wenzhou shoes are famous in the country.

That's it! At this time, Wenzhou shoes are not recognized in the market, Wenzhou leather shoes are also called "one-day shoes" and "morning and dusk shoes", the fake and shoddy quality has caused public indignation among consumers across the country, so that many shopping malls have posted a notice of "Wenzhou shoes in this store".

Li Zhongxin's idea is very simple, although Zhongxin Company does not necessarily want to build a factory for the production of leather shoes in Wenzhou, but it can acquire several large-scale shoe production enterprises there, and begin to use Zhongxin quality to make shoes, so that the footwear industry in Wenzhou can establish a sense of integrity and reshape the image of integrity.

Wenzhou's unique geographical advantages and the spirit of hard work of the people during this period will also be helpful for the development of Zhongxin Company in the south in the future.

In a short period of time, Zhongxin's entry into those super-large cities will gradually slow down, after all, the big cities will gradually push factories or other outward in the future, and the other point is that the development of China's large cities in the future, Li Zhongxin does not want to affect too much.

Wenzhou, Xiamen, Shantou, these areas are the key areas for Zhongxin Company to settle in the future, at this time, the housing prices and messy things in these places are quite cheap, can be regarded as the pioneer after the reform and opening up.

In the future, the bras and clothes of the company will be exported, so the shoes should also be put on the agenda, and the export products will be a full set of products, and the brand will be a full set after it is launched, so that there will be a brand advantage.

The second phase of Dong Zhiguo's current small household appliance production plant has been completed, and the small household appliances produced can now be fully supplied to Zhongxin Supermarket.

In terms of construction and commissioning of the third phase of the plant, it is necessary to expand the production plant of major appliances again. It will be determined according to the scientific research results of the Zhongxin scientific research base, if it can be put into production in a short period of time, it is the best thing, if not, the construction should not be stopped.

In the future, the company needs to produce its own large-scale household appliances, not just televisions and washing machines.

Refrigerators have not yet entered thousands of households, refrigerators and other things such as compressors are pitifully rare in China, if necessary, Zhongxin small power plant can consider the production of state-owned self-owned brand compressors.

The compressor is a driven fluid machinery that lifts low-pressure gas into high-pressure gas, and is the heart of the refrigeration system. It sucks low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the motor operation, and discharges the high-temperature and high-pressure refrigerant gas to the exhaust pipe to provide power for the refrigeration cycle, so as to realize the refrigeration cycle of compression→ condensation (exotherm→ic), expansion → evaporation (endothermy).

Compressors are produced on an assembly line basis. In the machining workshop (including casting) to manufacture cylinder blocks, pistons (shafts), valves, connecting rods, crankshafts, end covers and other parts; Assemble the rotor and stator in the motor workshop; Shells, etc., are manufactured in the press shop. Then assemble, weld, clean and dry in the assembly workshop, and finally pass the inspection and package the factory.

The production of this kind of thing is not difficult, the main thing is that the production line of the compressor needs to be purchased from foreign countries.

The faithful company is not short of money now, what about this matter! As an idea from Dong Zhiguo's side, if the third phase of construction is fast enough, then Dong Zhiguo's side will start to prepare for cooperation with some factories, Zhongxin Company produces the most critical compressor in the refrigerator, and other companies produce some supporting things, and then assemble them into refrigerators belonging to the Zhongxin brand.

What about this thing! It was also decided after Li Zhongxin's careful consideration, because Li Zhong knew in his confidence that the living standards of the Chinese people were about to rise, and as long as the cost of the compressor could be greatly reduced, the cost of the common people to buy refrigerators would also be reduced, and the common people would be able to use refrigerators earlier.

What about the electronic instrument factory here in Jiangcheng! Now the benefits have gone downhill, if possible, the company should also buy this electronic instrument factory, in the future the company needs more things in terms of electronic instruments.

The most important thing is that the amount of electronic instruments used in the scientific research base will increase year by year, and it will be time-consuming and laborious to rely solely on procurement from other places, which is not as good as the self-production of Zhongxin Company.

Now the company has undergone earth-shaking changes from before, the employees of the former company are farmers over there in Zhubantun, and now! There are more and more highly educated people and scientists in the company, and the acquisition of this kind of factory, as long as there are experts in the factory to give certain guidance, it can be produced, and it will also become a supporting factory for the scientific research base of Zhongxin.

What about these! Dong Zhiguo is responsible for it, and at the same time as he is responsible for these tasks, the factory in terms of machining! It should also be built as a supporting part of the faithful scientific research base.

In terms of personnel training in machining, you can negotiate with the coal mining machinery factory in Jiangcheng and the motor factory in Jiangcheng, so that they can help train some types of machining work.

The purpose of the operation of this machine processing plant is not only to support and train machining personnel in the Zhongxin scientific research base, but also to lay the foundation for the future supporting facilities of the automobile production base.

If there is no big accident, it will be able to start production in the summer of '86, and this production is just to import parts from France, and then learn to assemble and assemble by people from Jiangcheng, China.

https:

Keep in mind that the first domain name :.com this book. The mobile version of the mobile version of the wonderful book house is :.com