There, he did see some abandoned vehicles, but as for the machine tools, he really didn't see them......

As for the 707 schools, the location pointed out by Yang Yuanqing in this city should really be in the area of the Sixteen Cities of Yanyun among the local population.

However, the specific location still needs to be verified on the spot.

After all, the 707 Institute was also thousands of years ago, and after so many years, the geographical features and geological structures may also undergo some changes.

It seems that if there is a chance in the future, I still have to go over there to see wow.

But for now, it seems that it is more practical to explore the tiger's den again.

Wait until next time you have time, there are other things to be busy this time.

Yang Yinuan looked at the machine tool in front of him, felt very hot, and asked Yang Yuanqing a lot of questions about this machine tool.

Previously, when he was in Bluestar, he had also seen a lot of machining centers.

Even when I was an intern, I operated a lot of Hans and Wa Guo machine tools in the factory.

For example, Hans's Trumpf, Henglun, Yaskawa, and Fanuc are all very good to use.

However, those machine tools are used for cutting and boring workpieces.

And the octopus in front of me is not the same as those machine tools, this machine has a very flexible robotic arm.

His robotic arm has a very high anthropomorphic effect, for example, there are several robotic arms inside, which actually have a structure similar to the five fingers of a human being.

This shows that this kind of machine tool is more flexible when working, and the most important thing is that it has a super high artificial intelligence operating system.

This is evident from the fact that he can disassemble a rusty engine in a matter of minutes.

You must know that the rusty old engine, even if it is brought back to the current Blue Star, it is impossible to complete such a non-destructive dismantling directly with machinery.

It requires skilled workers, specialized tools, and a long time to complete.

If it is simply dismantled by the machine, it is impossible to complete the current machine tool technology of Bluestar.

Unless it is a profiteering demolition, all kinds of drill bits, chainsaws, and grinding wheels are used for you, so that the dismantling can also be completed, but in the end, it can only be a pile of scrap metal.

The machine tool in front of you can flexibly choose to change the tool according to the situation of the machine tool, automatically switch the working mode, and finally complete the non-damage disassembly.

This only shows one situation, this machine has a super intelligent control system!!

In the next process of understanding this machine tool, Yang Yuanqing's answer really verified Yang Yinuan's guess.

Indeed, the intelligent control system of this machine tool is an artificial intelligence operating system specially developed by Falken Xingren.

Although it is only a very rudimentary generation system, this is enough shocking for Yang Yinuan.

Because with this system, you can not only use the machine to disassemble the machine, but also use it to process the machine.

In this way, there are more scenarios in which this machine can be used.

The most important thing is that with the addition of this system, it also makes precision machining easier.

Take the various machine tools currently used on Bluestar, whether you are a five-axis CNC or a seven-axis CNC machine.

The first thing to face is the material problem, such as the bench of the machine tool.

It seems very simple, an iron lump with no technical content, but there is a lot of attention in it.

A long time ago, this kind of steel for the production of such a bench had to be thrown into nature for decades.

Let the iron tuo withstand all kinds of wind and rain in nature, and some will even be thrown into the sea, so that the steel is squeezed by the seawater.

One purpose of this is to eliminate the stress inside the steel.

Because if the internal stress of your steel is too high, then your fixture will clamp the workpiece while machining.

Other tools cut and grind the workpiece at high speed, exerting a force on the workpiece.

And this force is transmitted to the bench through the fixture, and the bench is very important as the stability system of the machine tool.

If the internal stress of your bench is too high, then a reaction force is applied to the fixture, which is fed back to the workpiece.

Then when your cutter head is grinding and cutting, it may cause errors due to this reaction force.

If the error is large, it will even lead to the failure of the entire workpiece.

The bench that relieves the stress will transmit the force exerted by the cutter head on the workpiece directly to the ground without generating reaction force.

In this way, the accuracy of processing can be guaranteed, and many high-end factories ensure that the ground does not produce reaction forces.

Even when the factory is being built, a deep pit is dug under the processing workshop, filled with river sand, and finally filled with a layer of rubber cushioning layer.

For example, don't touch my factory in Yanguo, that's what I did.

Therefore, the error of the engine processing is only 2 μm......

Note that this is the total error of the whole engine assembly, and you must know that each workpiece is machined with errors.

However, after hundreds or thousands of parts are assembled together, the accuracy of the entire engine can be guaranteed to be within 2 μm, which can reflect how awesome the finishing is.

And we're not close to that......

Of course, this is also the main reason why people's machine tools are expensive and we have not been able to learn them.

Because first of all, in terms of materials, we are a little worse than others.

Especially now, various metallurgical technologies have advanced by leaps and bounds compared with before.

For example, with the emergence of various cold and hot cycles and reverse quenching smelting methods, people's materials are becoming more and more popular.

And in this regard, we are not half a star behind others.

This is also the main reason why our finishing has not been able to catch up.

And now with this octopus machine tool in front of him, in Yang Yinuan's view, it is really developed!

The precision machining problem that has been plaguing Yanguo Industry in the past can be said to be solved.

If such a technology is brought back to the Yanguo on the Blue Star, it will bring a subversive breakthrough to the entire industry.

For example, this octopus machine tool uses ordinary high-strength steel for its bench.

This is mainly done to ensure that the bench is strong and will not be deformed during processing.

As for the internal stress, it is completely offset by the super artificial intelligence system of this machine.

Because during machining, his fixture will constantly adjust the angle of the workpiece with the reaction force fed back by the bench.

The angle of the machining cutter head will be constantly adjusted, so that the reaction force fed back by the bench will be added to the positive afterburner of the cutter head.

It is applied to the workpiece to be machined, which not only ensures the accuracy of machining, but also makes the machining easier.