It was originally intended to be used as a warehouse, but it has not yet been officially put into use, so it is empty, and it is just right to process gas turbines.

The two got into the car and lifted the cloth.

The Super Octopus I underneath is revealed, and it's a cute guy.

It looks like a rectangular piece of metal, with two robotic arms sticking out from either side.

After opening the mask, Stephen lit up the LCD control screen in front of the machine and entered a set of passwords on it.

Then, to the surprise, the machine was activated.

None of them have UMC......

And then this thing, the two mechanical arms stretched down, and it came to the front of the back bucket.

After that, the robotic arm has been sticking out and supporting it on the ground, and the mechanical arm has been supporting the rear bucket of the car, slowly moving its own main body.

The whole process went smoothly, and Yang Yinuan looked stupid.

Is this still the CNC and CNC machining center in his impression?

Isn't this a robot?

But looking at the appearance of this simple device, it is really difficult to associate him with the robot!

In Gaojiabao before, he watched Yang Yuanqing operate a broken octopus machine tool and work.

At that time, the impact of the machine tool with ten robotic arms on him was unimaginable.

You must know that according to Yang Yuanqing, it is just a dilapidated Octopus-UNSS model intelligent machine tool with only five percent of its power left.

But even if it is a severely crippled machine, its production efficiency is incomparable to the top machine tool he has ever seen.

And now this machine tool with only two robotic arms shocked him beyond measure.

This thing is completely out of the category of machine tools, this is completely an autonomous robot, right?

Then what surprised him even more was that the robot actually jumped twice on the floor of the warehouse with two mechanical arms......

Seeing such a mysterious operation, Yang Yinuan was completely blinded.

What is this for? Do you practice high jump?

But Stephen explained with a smile: "It's testing the hardness of the ground, measuring where the ground stress is low." ”

"Then choose the best address for yourself to take action."

As soon as the words fell, the machine stopped jumping, and then pulled a latex mat from the back of the off-road vehicle and padded it under its fuselage.

After completing this series of actions, the machine finally stopped steadily...

Watching this machine tool complete the dump truck, and then automatically position the action, the uncle and nephew are stupid!

This machine tool has completely exceeded their cognition.

Where is this still a machine tool?

It's clearly a robot!

The second uncle looked at this machine tool dumbfounded, thinking that he also went out to work when he was young and made screws in some factories.

He has also seen some so-called industrial robots, but those that are installed in a fixed station and will only repeat some welding actions every day.

Compared to the robot in front of me, those robots are simply garbage.

If this robot is at the level of a college student, then the welding robots he saw on the assembly line before are elementary school students.

No! That is, preschool-level robots.

"Is that okay?"

"That's it...... Can you work on the concrete floor you can find anywhere? ”

The second uncle said that he was very incomprehensible about the location of this robot.

"When I was younger, I worked in a car factory, and I saw them introduce machine tools from Hansko."

"When the machine tool was not in place, just building a factory building would be wasted."

"Holes were dug in the ground, then backfilled with river sand, and finally a thick layer of rubber cushioning was laid on top of them."

"Then level on top of the cushioning layer, and the flatness requirements are very good, plus or minus are not allowed to exceed one micron."

"Because I heard from engineers that even a micron inclination on the ground will affect the machining accuracy of the machine tool!"

"So that kind of factory looks no different from the iron factories in other places, but the cost and man-hours are several times that of ordinary factories."

"Some plant construction alone will cost millions of ......"

Yang Yinuan knew that when the second uncle and the second uncle were in their early teens, they used to work in an automobile factory in the Bazhou Development Zone.

So in this paragraph, he knew that what the second uncle said was true.

Although he had also seen the performance of the octopus machine tool, he saw this machine tool at this time, and it was so large after it was installed.

He didn't have a score in his heart, and he turned his eyes to Stephen.

Stephen smiled.

"You can rest assured about this, our machine tools, the principle of ensuring machining accuracy, is different from ordinary machine tools."

"Ordinary CNC requires a lot of external objective conditions. to ensure the accuracy of machining. ”

"For example, the ultra-clean workshop with a buffer layer, while our machine tools do not have such high requirements for conditions."

"Our machine tool uses a more intelligent super algorithm, and the main and auxiliary axes cooperate with each other during processing."

"We will make the most of the impact force and turn the impact force into the torque required for processing......

"Well, it's hard for you to understand this......"

"Forget it, let's just look at the operation!"

As he spoke, Stephen ignored the stunned uncle and nephew, and unloaded a large amount of material from the back of the car.

Many of these materials have already been processed.

For example, the main shaft of the entire gas turbine and the supporting combustion chamber.

These devices are not big, or rather, they are not as big as Yang Yinuan imagined.

After all, their plant is not very large, and the gas turbines needed for power generation do not need to be too large.

And Stephen also said that this machine is the first product.

It has the meaning of a verification machine, so it doesn't need to be too big.

Make it first, put it in the power plant to experiment, and once the test is successful, it will be made a real enlarged version immediately.

The uncle and nephew listened to it ignorantly, so they didn't ask much.

At this time, Stephen removed a lot of different materials from the back of the car.

"The main materials used in this gas turbine are nickel-based alloys, titanium and steel."

"Especially the blades on the turbofan, the cost is the most expensive, and the production difficulty of this thing is also the highest."

"Because he has to work in a high-temperature and high-pressure environment, the maximum temperature he needs to withstand must reach 1,900 degrees......"

'Hiss......'

Hearing Stephen say this, both uncle and nephew couldn't help but gasp.

At this temperature, the iron will burn you into slag.

"Of course, this is the highest-grade turbojet engine used in aero engines!"

Hearing Stephen's explanation, the uncle and nephew couldn't help but roll their eyes again.

Can you not pant so much when you speak?