Nine workshops.

A modest machine with an area of only six square meters, which is miniature for a machining center.

In the week of this machine alone, there were forty tables, eight drawing tables, four metal workbenches, sixteen single sofas, eight couches, and fifty marching beds.

Li Sanpao stood in the middle with his hands crossed over his chest.

Then there are Feng Yuchun, professor of mechanical and electrical engineering of Jingzhao Jiaotong University, Lin Heming, professor of electrooptics of the Western Army, Qiao Lizhi, professor of computer science of Jingzhao Jiaotong University, and Wu Qianye, professor of mechanical theory of engineering university. There is another one, He Qiufeng of Jingzhao Jiaotong University, a professor of materials science, he is not here tonight because he has to go to the school laboratory to verify several sets of data.

A little further out, Zhang Jianguo's apprentice Wang Xiaoxiong, Zhang Jianguo's third junior brother Meng Hao, and Feng Yuchun's doctoral student......

Three circles inside and three circles outside, this place is already full of people.

In front of the workbench, Li Dong, that is, Li Sanpao's second apprentice, is forty years old this year, older than Zhang Jianguo, but he studied with Li Sanpao two years later than Zhang Jianguo.

The eighth-level lathe, a senior technician in the industrial and power plant, is also the treasure of the industrial and power plant.

Zhao Fang has been running forward and backward with a record book, and he is now Li Dong's apprentice.

After completing all the tests and equipment inspections, Li Dong was already sweating profusely.

"Master, I'm okay here."

Li Sanpao turned around: "Professor Wu, Professor Qiao." ”

"Yes." Wu Qianye waved his hand lightly: "Each group starts to record, the seventh test machine." ”

Sitting at their desks, the PhD students began to get nervous, with televisions in front of them that acted as monitors and transmitted all sorts of data to the TV screen. Because there is only one computer, it can be said that it is the world's top household level, and the unit price is nearly thousands of dollars.

The machine moved.

The task was to carve a relief of a horse on a square aluminium ingot at once.

All the processing processes were carefully thought by Li Sanpao, and Professor Qiao's students typed out letter by letter. At present, this machining center is different from Bai Hao's original design, and Professor Lin has been working tirelessly to improve the students on Bai Hao's design drawings.

At the moment, all feed data is four decimal places, which is a few thousandths of a millimeter.

This is the one-armed Lin Heming who led the students to work on the grating ruler.

It's too hard.

The entire workshop of the Ninth Branch Factory is full of panda eyes, even if you go to sleep, no one can lie on the bed with peace of mind, which is why Bai Hao has not seen anyone for a few days, and he is no longer dressed brightly, and he began to wrap cotton coats.

I was so sleepy that I couldn't do it, so I leaned back on the sofa and slept for a while, and when I woke up, I joined the work.

Lu Dacai, who followed Bai Hao in, stared at it for only a minute, then suddenly took a few steps forward, and knelt on the ground, tears gushing out like a spring.

Four-axis, which is a four-axis machining center.

The equipment that Xia Guo wanted to have, but did not have at all. Lu Dacai has visited Wadao, the beautiful country, and the bunker country, but these countries have reached an alliance, and they will not sell this kind of high-end equipment to the Xia country at all, and even if they visit, they will only let them look at it from a distance outside the glass window.

This four-axis, Bai Hao knew that it had been completed.

It's just that Li Sanpao and the four professors want more data and more research materials, in order to study this technology thoroughly, so that the four-axis can become a kind of machining center that can be mass-produced.

Seeing that the relief horse had been completed, when Li Dong stepped forward to measure the error value, Bai Hao walked up to Li Sanpao: "Master Li, there is such a thing." You always listen to me, I suspect that the little widow has cheated us. ”

"Uncle Cai, let's talk about it."

Lu Dacai touched his face, and ran over in a few steps: "Can I take a closer look." ”

"Let's talk about more important things, you helped the industrial and factory inspect the equipment of the little devil, I personally suspect that it is an assembly problem, you have seen it with your own eyes, talk about it."

Li Sanpao turned around and looked at Lu Dacai very seriously.

Lu Dacai adjusted his mood: "I didn't dismantle it, I just observed the machine up close, and I can't say for sure, just one of the problems I found." There are a couple of locations where the early installation can break the bearing insulation, and technically, if the insulation is broken, then the very thin film of the bearing will be broken down by the shaft voltage, and the result after the film breakdown, a lot, you know. ”

Lu Dacai is not good at words, but what he says is the main point.

There are real experts here.

After Wu Qianye's analysis: "Yes, the breakdown of the oil film not only makes the lubrication conditions of the rolling elements bad, but also the electric sparks that may be generated will form electric corrosion on the rolling elements of the bearings, causing the surface of the rolling elements to not only accelerate the wear of the bearings. ”

Lu Dacai continued: "Because we didn't come to Qinzhou to take care of this, and there were no instructions from above, so it was not good for me to check other damaged parts, but I estimated that the losses caused by various bearing problems alone would cost millions of dollars in industrial and electrical engineering." ”

Suddenly, Lu Dacai turned his head sharply to look at this four-axis machining center, he is not good at words, it does not mean that his head is stupid.

In an instant, he understood why Bai Hao had brought him into the workshop.

"With this, we can produce the annular curve reducer ourselves. And it can make hundreds of them a day, and this machine can, and it will definitely be able to. ”

"Of course." Wu Qianye is very aware of the capabilities of this machine, and he also knows that it is impossible for ordinary machine tools to process things, but the four axes can be easily completed, and the program can really be processed hundreds a day. The next thing is the material problem, with He Qiufeng here, he can bear it.

Bai Hao stretched out his hand and put his hand on Lu Dacai's shoulder: "I said Comrade Dacai, tomorrow you will definitely have the opportunity to enter the workshop that has been sealed, and you steal two bearings with reducer functions." No problem. ”

"This."

Seeing that Lu Dacai hesitated, Bai Hao said again: "Steal it out, I'll find someone to answer, you just need to get it to the door of the workshop." ”

Lu Dacai didn't understand: "Why don't you explain to the factory directly, I think the factory should support you." ”

Bai Hao shook his head: "I have to determine if I can do it first, and if I can, I won't come forward." How did they force me to retire Li Ye back then, and how to invite Li Ye back today. Although there was no way in the factory back then, if this breath came out, people would be suffocated. ”

"Yes, okay." Lu Dacai agreed.

Bai Hao straightened up: "Zhao Fang, it's time to employ people." Put the imported equipment in the workshop less than 100 meters away from where Li Qiang works, okay? ”

"Well, I'll go find him." Zhao Fang understands that this is an opportunity.

Although Li Qiang is slippery, he never drops the chain at a critical time, if Li Qiang is cowardly this time, he is embarrassed to ask Bai Hao to leave a place for Li Qiang as a regular worker, of course, this matter cannot be forgotten Lu Qiao.