Li Sanpao has worked on machine tools all his life. He knows very well what a good machine tool means to the factory, and the old man has not slept for a few hours at all these days, and spends all his time on this machine.

In the process of reassembling, he can feel that the part is good and what part is bad.

He began to tell Bai Hao one by one about the Quanxia Guoda Factory that he knew and could provide the best quality parts.

While I was talking, I suddenly heard the sound of a machine starting in the room.

Li Sanpao pulled Bai Hao and hurried to the house.

It was indeed activated, Catherine saw Bai Hao and said: "Right now, this four-axis is indeed real, the four-axis technology you really have, but your four-axis is still only rudimentary, I just finished adjusting the control system, and entered one of my works in college, just to try." ”

A complete rectangular piece of aluminum has been hoisted.

Hoisting is a technical job, fixing the aluminum block on the workbench is also a technical job, and completing the initial positioning is a technical job.

Of course, it is much more necessary to write a program for the processing of this aluminum block.

The machine still can't replace the master, because the master will design the process better.

The speed of the rectangular block of aluminum, visible to the naked eye, changes.

Li Sanpao suddenly spoke: "The design of this process is not good, if it is changed to the speed of the No. 7 milling cutter at 0.03 millimeters per second and the 76-degree angle into the cutter, it will be better, and now it seems that there will either be a slight roughness, or another knife will be smoothed." ”

Catherine wondered what the old master had said.

Xia Guohua is a half-tone.

After Bai Hao gave the translation, she replied: "That's right, that's it, so I can only add one more knife." ”

The process is experience.

After all, it is the work of Catherine's college graduation.

Soon, the aluminum block was finished, and no one touched the parts again, only someone stepped forward to hook off the excess aluminum chips and added coolant twice.

Venus.

A beautiful aluminium Venus embedded statue.

That's the beauty of a four-axis machining center.

But, it's a pity. As Catherine said, the machine in front of her is a hard non-coaxial linkage turntable, which is the fake four-axis that Bai Hao said, which can only be carved and embedded, not a complete three-dimensional type.

Feng Yuchun and Wu Qianye didn't dare to add the turntable.

The turntable they designed kept going wrong, and they were afraid that Bai Hao would drop the chain when he was showing, so they only used a rat-tooth hard turntable.

Li Sanpao touched his chin: "This can be complete, I will remove the parts, as long as I align the reticle and reinstall it in turn, and then set the program behind it, it can be done." ”

There's no need for it.

Catherine came just to confirm whether Xia Guo had really mastered the three-axis and four-axis, even if it was an ordinary three-axis and four-axis technique.

Now it is clear that, as far as you can see from this machine, Catherine believes that Xia Guo not only has a complete three-axis, but also a prototype of the four-axis.

Poor, just the control system.

I believe that at least half a year, at most a year, Xia Guo can have a turntable four-axis machine tool. Because the control system is the most difficult to block, as long as there is a senior engineer of Xia descent who returns to Xia from the beautiful country, he does not need to bring any information, just what he has in his head.

Although Li Sanpao doesn't know how to program, he understands craftsmanship.

He can set the process flow, and a professional person will be responsible for writing the feeding process for the second half of the Venus.

This is a bit different from real programming.

Standing aside and watching, he felt that he was twenty years younger, and he estimated that he could learn this thing.

Li Sanpao said: "This is like talking, let's say, how fast to enter the knife, at what angle, and how much." Change the tool again, and then ...... It's not hard. However, it seems a bit difficult to control these talking things, and I can't understand them. ”

Catherine's attention was the notebook piled on the iron-clad table.

Although she is not proficient in Xia Chinese, she remembers that someone mentioned just now that the ninetieth time is enough to prove that the four-axis machining center has been tested nearly a hundred times after it has been assembled.

Looking at the pile of parts next to her, she could feel that it was a constant attempt to find new mechanical structures.

It can be seen that Xia Guo's four-axis is really not far from mass production.

Catherine casually glanced through the record book, although she was not proficient in Xia Chinese, she knew a little.

The time was written on the corner of the first notebook, in the morning of the day before.

Seeing this, Catherine asked Bai Hao: "Didn't they rest, at least for a day and a night?" ”

"It doesn't matter."

Bai Hao did not answer this question.

He knows even more that when the first four-axis was assembled, everyone worked hard.

Bai Hao asked Catherine again: "Now that you see my four axes, then call your home, and then send a fax, and then I will take you to the hot springs, and then talk about the details?" ”

Catherine nodded: "Okay, our Haas company has promised your order in advance, and you can prepare the contract." I believe that those equivalent to the ordinary machine tools of our beautiful country fifteen years ago, you can finish. However, you have to understand that our Haas company is credibility, so the parts should be used ours, and what is the proportion of use, I need to arrange someone to come and evaluate. ”

"No problem."

Bai Hao breathed a long sigh of relief, he knew that Haas Company had a large number of overseas orders, and in his memory, just because of this strike, he lost more than 50 million liquidated damages for not delivering goods to Ah Sanguo in time.

The total value of a mere 1,000 ordinary manual machine tools is unlikely to pay a penalty of 50 million US dollars.

So, how big will the total order be.

It seems that this piece of fat is enough for me to take a bite. Can you bite it again, take a step at a time.

Bai Hao, who was in a relaxed mood, took out a cigarette, but was slapped off by Li Sanpao: "Smoking is not allowed in this house, I heard that it is necessary to maintain the state of the machine, and also to maintain the temperature and humidity. ”

"Yes, yes." Bai Hao didn't even dare to pick up the cigarette.

However, Li Dong's new apprentice Zhao Fang ran over to pick up the cigarettes, and even the fallen tobacco on the ground was picked up one by one.

Bai Hao gave Guo Fengxian a thumbs up with his hands behind his back when he walked out with Catherine, and Guo Fengxian looked at it and smiled.

Li Qingyue walked over and asked, "What do you mean?" ”

Guo Fengxian watched Bai Hao accompany Catherine away from a distance, and then turned to Li Qingyue and said:

"It's done, let's get ready to negotiate. For an order of 1,000 ordinary machine tools, I don't mind using all Haas parts, after all, this is our first order. However, Bai Hao's opinion is not wrong, it is more beneficial to the future development to use our qualified parts made in Xia as much as possible. ”

It's done.

It's a happy event.