"Okay, that's it, the company is still expanding,

You need money for everything, and that's a lot of money! ”

Liu Xiaodong and the two then agreed to the dividend plan, and they made a plan for the company's development next year.

After talking about things at work, all that was left was to eat and drink, and they ate more than one of the two lambs.

After eating and drinking, they went back to their respective homes, Li Zhenhua and Li Yun still went back to the hotel.

"Come home with me for the New Year this year!" The two of them were nestled on the couch, and the TV was playing a TV series, but neither of them was focused on the TV.

Hearing Li Yun ask, he also fell into silence and waited for a while before answering her question.

"I won't go to Haicheng this year, I'll just stay in the blacksmith shop, and at that time, the people who built the house behind are gone, and the house is no longer noisy, so I just go back to live.

And last year in Haicheng, some customs have not been observed, this year is not good, the family hall still has to be worshipped, the second year of junior high school has to go to the grave of grandpa and parents, a lot of things! ”

After Li Zhenhua finished speaking, Li Yun did not force him to go to Haicheng, she also had her own thoughts in her heart.

Approaching the end of the year, the company's affairs are even busier, but all this has little to do with him.

It has no effect on him, and he still maintains the previous rhythm of life!

At the end of the year, Li Yun went home, and after he left, he moved back to the blacksmith shop.

When he was left alone at home, he felt more free, and when the Chinese New Year approached, he didn't plan to continue to go to the company.

This is the right time for him to go into the virtual lab and do his own research.

In the laboratory, an accuracy of 50 nanometers is used to optimize existing chips with the help of the Analytical Eye.

And in his hands, the lithography knife also played a great role, but as the chip circuit diagram was drawn more and more,

He gradually developed a sense of disgust in his heart for this repetitive work, but when he refocused his attention on the lithographic knife in his hand,

He was immediately stunned, as if he had entered a misunderstanding, why did he have to carve it by hand?

What is the difference between a human and an animal? It's people who use tools, but animals don't.

Why didn't he upgrade the lithography machine from 1 micron to 0.05 microns?

A feeling that I was stupid, wasting a lot of time came to my mind. Then he worked on lithography machines.

Halfway through the process in front of him was erased in the laboratory, and the micron-sized lithography machine he had purchased was re-incorporated.

Looking at the original lithography machine re-embodied in front of me, I felt that a lot of time had been wasted.

There are shortcuts that have not been taken, but have chosen the most difficult path.

And just as he was getting deeper and deeper in his understanding of lithography machines and chip manufacturing, he gradually felt his ignorance.

There is a truth, the more knowledge you know, the more you will feel ignorant, because when you don't understand, you will feel that one thing is very simple to do.

But as my knowledge gradually increased, I also understood how difficult it was to do something.

I suddenly felt that I was really lucky to be able to get the chip out before, which was in the virtual laboratory, so that he was able to make it.

If this really comes to reality, let alone rubbing out a chip by hand, just a clean room can stump him.

It was also after having these ideas that he gradually lost confidence in the idea of rubbing chips.

If the chip is rubbed out in reality, it is a huge project, and the first thing to do is to build a clean room that has reached the first level.

There's a lot to do in reality, but with their current size, they don't have that much money to build these things.

Since then, he has completely abandoned the idea of hand-rubbing the chip, because it is simply impossible to achieve it in the current reality.

It's as if I was in the virtual lab before, and everything I did was useless,

But this also made me realize what is the chip industry, and in what he has learned, Kyushu still has a long way to go.

Lying on the bed, reopening his eyes and looking at the dark room, he sighed, rolled over and fell asleep.

said that after Li Yun returned to Haicheng, she faced pressure from her parents, thinking that she came back alone and did not bring Li Zhenhua back.

Ding Yan once thought that the two of them had broken up, but under the subsequent interrogation, she also knew the reason.

Although the two of them are not married yet, in Ding Yan's eyes, the relationship between the two can be said to be a sure thing.

After understanding the reason, he let Li Yun go.

During the Spring Festival, people also have free time, and a large number of people are chasing dramas and Douyin at home.

It was at this time that the video of the Antarctic team, which can be called a movie plot, became popular.

The reason for the fire is also very simple, this time the fire started from the outer network,

A scientific expedition team of the Antarctic team encountered the same situation as the Kyushu Antarctic team when they went out to do scientific research tasks.

They also faced the ice shattering, but their snowmobiles didn't play much role.

There were six snowmobiles in total, and only two of them ran out in the end.

The remaining four cars with the four people in the car all died in the South Pole against the shattered ice.

After the only two people ran back to the scientific research station, they reported the matter.

The videos were also submitted as evidence, and one of the staff members also posted them online.

An exchange student in Kyushu, after seeing the video, immediately thought of the video he saw on Kuaijik before,

Two videos, the same situation, but different results, made the guy a little difficult to accept at the time,

Then the two videos were edited together and sent to Kuaidou International, and then the video became popular, and it was moved back to Kyushu from Kuaidou International.

And with the Kyushu Antarctic expedition team, the snowmobile that escaped death has become the focus of people's attention.

But even if people searched it out, they couldn't find which brand this motorcycle was.

In people's curiosity, a large number of people suddenly poured into the official website of the Antarctic station, almost all of whom came to inquire about motorcycles.

But now it's the Spring Festival, it's already a holiday, and no one on the website answers this question.

That's where the matter is put on hold.

Li Zhenhua has a very traditional New Year, and the customs of the New Year remain the same as when his grandfather was still alive.

After the New Year, he began to resume work on the seventh day of the new year, and Li Yun also came back on the eighth day of the new year.

The days that followed returned to its former peace, the house behind the blacksmith was almost built, everything on the outside was already installed, and all that was left was renovation.

The newly established factory is still under construction, and it is estimated that it will take three or four months if it is fully put into use.

After Li Zhenhua put down the obsession of rubbing the chip by hand, he devoted all his energy to the manufacture of the mechanical part of the aircraft.

As for the flight controller, avionics and other things of the model aircraft, now they can only buy ready-made chips on the market to develop them.

Time passed, and all the materials used in the model aircraft were finally made by him, and then the manufacture of the model aircraft engine began.

To say that among the materials, the most difficult is the core combustion chamber to be used, and after a series of overcoming difficulties, these materials have finally been made.

The single-crystal nickel-rhenium-iron alloy in front of him took a lot of effort to get out.

And for this alloy, he also made a controllable magnetic field to arrange the single crystals of this alloy.

The manufacture of the engine, which completely replicates the process in the laboratory, and the experience accumulated in the virtual laboratory before finally came in handy.

The first thing to make is the casing of the engine combustion chamber, the diameter of the engine is reduced to 29 cm, the size of the casing his machining center, can completely manufacture this.

A 40-centimeter-long square single-crystal nickel-rhenium-iron alloy was put into the machining center, and this metal was a new superalloy smelted before.

In the light curtain in front of him, it was shown that the internal stress of the block metal had been almost released.

The little internal stress that was left also made him take the rubber hammer and knock it out with the help of the Eye of Analysis.

After placing the metal in place, as he pressed the start button, the cutting head of the machining center rotated at high speed, and the milling cutter cut a little chip on the metal.

As the head rotates, chips fall off the square piece of metal, and its shape changes as it is cut.

Slowly, as more and more debris is cut off the metal, the metal never returns to its shape.

After a day of manufacturing, the top half of the metal block has been rounded with holes in the machining center.

In two and a half days, a complete combustion chamber casing was taken out of the machining center by him.

And he spent two and a half days in the machining center here, and he kept an eye on the machine.

After taking the machined casing out and setting it aside for later use, we began to manufacture parts such as impellers and discs in the combustion chamber.

The processing of the wheel disc is relatively simple, but the processing of the impeller is a little difficult.

Because the machining center he is using now cannot meet the requirements in terms of accuracy at all, which also makes him only use the machining center to make a preliminary rough blank.

After that, he took out the rough billet, fixed it on the vice, and rubbed it by hand with a file.

A blade and a blade were rubbed out in his hands, and the rubbed blades were also loaded onto the impeller disc by him.

And when it is installed on the wheel, it has begun to notice the dynamic balance of the impeller.

His eyes and hands are not vegetarian either, and his balance can only be regarded as a minor problem.

Turbojet engines are also taking shape little by little with his manufacturing.

Time slipped away quietly in the process of building the engine, and the engine was finally rubbed out by his hands after more than a month of manufacturing.

In the center of the workshop, he was standing next to an iron shelf, and on the shelf was a turbojet engine that had been built.