Chapter 220: Making Toys (2)

Looking at the two books in his hand, one large and one small, his eyes were fixed on them, and he became a little confused.

He was indifferent to this before, but as his mind gradually matured, he became very recognized on this issue.

The reason for this is nothing else, just because in Kyushu, there are things they are real.

And when he was looking at it, the dean next to him said again: "Okay, don't look at it, it's already been sent to you and can be taken back for you, these will be appreciated slowly after you go back."

And for the award you won, you have learned before, this is the highest honor for scientific and technological workers in Kyushu.

So far, there have been a total of 44 scientists in Kyushu who have received this honor, and you are one of them, so you can be proud.

In fact, for the results you have achieved, you deserve this award.

Okay, let's take a closer look at the award ceremony later, oh yes, I forgot to tell you, after the ceremony, I'll take you to the award office to collect your medal and the corresponding bonus! ”

After listening to the dean's words, he also had a sense of honor, you must know that this is the highest honor for scientific workers in the entire Kyushu,

Who has won this award? The list of winners will not be listed one by one, anyway, the first winner is Mr. Yuan.

The honor he has achieved now is a figure who can be placed alongside the old man.

As for the bonus mentioned by the dean, this is not important to him, because he is not short of money.

No matter what, he is also the chairman of the Kyushu Divine Beast, and he may not be ranked in the whole Kyushu in terms of value, but he can still be ranked in the province.

The award ceremony continued, and the big ** presented certificates to the winners one by one on stage.

The awards were presented quickly, and everyone's certificates were immediately awarded, leaving only the final group photo.

And Li Zhenhua, as the only one and only two winners of the highest science and technology award in Kyushu every year, is fortunate to stand on the side of the big leader.

After a huge horizontal photo was taken, the award ceremony was completely over.

When the leader left, the dean took him to the award office to collect the rest of the things that belonged to him.

After learning who he was, the staff received him very warmly and handed him the medal that belonged to him and a check for a bonus of 8 million yuan in person.

When he came out of the synagogue, he had a large book in his hand and a small one in his pocket.

As for the medal, he held it in his hand, and the check was sandwiched in the large book.

Anyway, there are no empty hands, it can be said that he returned with a full load, and he also thought about it, he will not pay the check, anyway, he is not short of the eight million, and when he goes back, he will have the check framed.

Together with the honorary certificates and medals he received, they were all put in the company's honor room, and when the photos were washed out, they were also hung in a place in the company.

When he received the highest science and technology award, this trip to Peking was also a successful end, and he still had a brain of knowledge in his head, which was priceless to him.

returned to the residence, explained a few words to Ning Wei and the others, asked them to pack their things, and they were ready to go back.

And after he explained to a few people, he went to the dean's office to say goodbye.

After handling all the things in Beiping, Li Zhenhua embarked on the way back, this time he did not choose to take a plane, but chose to take a car and Ning Wei six all the way back at high speed.

Out of the capital on the highway, only more than 400 kilometers apart, the distance is not too far, maintain a constant speed of 120 kilometers, about four or five hours to get home.

And after he got in the car, he closed his eyes and immersed himself in the virtual laboratory in his mind, planning the power exoskeleton he would make when he returned.

In the virtual laboratory, he arranged the surrounding environment to look like a library, and in the whole space, whether he understood it or not, he embodied all the books he had come into contact with.

Now the collection of books in it is almost catching up with a medium-sized library.

And he sat at the table, and the white paper in front of him was densely written with his plans after returning to the district.

Just as he was planning his plans to develop a powered exoskeleton, his senses were urging him to get out of the lab as soon as possible.

When he reopened his eyes and looked out the window, he realized that the car had stopped on the highway without knowing when.

And when he looked towards the front of the car, he realized that the traffic jam was extremely serious, but he didn't know what was happening in his position.

At this time, he could only wait in the car, quietly waiting for the road ahead to be cleared.

But after waiting for half an hour, the car in front of him was still blocked, and they didn't know what was going on, which made him a little depressed.

It would be better to choose to take a plane than to know this, and it would be a waste of time to get stuck in traffic on the road.

After waiting for more than ten minutes, the convoy in front of him was finally moving slowly, and looking at the slow-moving team, his mood was better.

When his car slowly moved forward and finally passed the location that caused the traffic jam, it turned out that there had been a car accident.

I saw that the road surface at the scene was sprinkled with fine sand, and the truck blocking the road had been moved to the side, and it was a bus that collided with the big truck.

Just as he wondered what was going on, a news item popped up on his phone that there had been a car accident on the Jingtai Expressway, which detailed what had happened.

A total of three people were killed and six lost limbs. One of the most serious was thrown out of the bus because he was not wearing a seat belt, and the moment he was thrown out of the window.

His entire arm was worn away from the friction between the bus and the ground.

Seeing this, he couldn't help but feel that this life is really too difficult, and life is also very fragile, and if he is not careful, he will encounter natural and man-made disasters.

As soon as he passed the scene of the crash, his speed increased, and he also secured himself firmly to his seat belt under the influence of the news just now.

In the afternoon, the team returned to his company, but after the accident he never quit in this mood and remained immersed in it.

I came home in a daze, washed up briefly, and sat quietly on the sofa, thinking about the previous events.

He always felt like he could do something, especially when he saw the broken limbs and broken arms described in the car accident.

He couldn't get to the point when he thought about it, but just as he closed his eyes on the couch again, not about to think about it any longer, the kinetic exoskeleton he'd been working on recently came to mind.

I saw that he was still very decadent and sitting on the sofa with his eyes closed, and he stood up from the sofa suddenly, his eyes were still wide.

"Yes, my next step is not to develop a power exoskeleton armor, as long as this thing can be made, I can develop a prosthetic, or high-tech prosthetic, on the basis of it."

He finally figured out why he felt that he could do something about it, that he could completely modify the exoskeleton armor he was about to develop into a prosthetic.

Thinking about it like this, the more I think about it, the more I feel that there is a head, and now the power exoskeleton is not just a toy that he wants to make for himself.

He identified the greatest value of the project, which is to assist the disabled to regain the lost limb mobility, of course, the main target group is the people who have lost their upper limbs.

The more I thought about it, the more I thought about it, but it didn't take long to come back to my senses and leave these thoughts behind.

Don't think about it so much, now it's better to think about how to get the powered exoskeleton out, as for the research and development of prosthetics,

The technology in this promotion direction is the last research and development that needs to be carried out! ’

While he was still thinking about this, the door was pushed open, and he opened his eyes from the sofa to see Li Yun standing in the doorway.

Seeing Li Yun come back, he didn't continue to think about his plan, and then stood up on the sofa and walked towards the beauty.

The two didn't eat at home that night, waiting for Li Yun to change into clothes, the two went to the county seat for dinner, and watched a movie after the meal.

That night was another dark war, and he had accumulated more than two months of homework and handed it over.

When Li Yun checked all his homework, the two hugged each other and fell asleep, but he didn't choose to fall asleep directly.

He went into the virtual laboratory to start the research and development of the power exoskeleton, and his body entered a deep sleep, which can be said to be both sleep and work.

Still in the form of a library-like space, he sat at a desk and designed the Powered Exoskeleton from scratch.

Power exoskeleton, to put it bluntly, still belongs to human wearable equipment, and smart watches, VR eyes belong to the same type, but to say that it is the same thing, it is not so appropriate.

This equipment achieves several goals, increasing strength, increasing speed, improving bouncing ability, and giving people a power to rely on.

In the previous understanding, this dynamic exoskeleton is not no one is studying, and many research institutions in the world are conducting research in this direction.

Their main application direction of this equipment is to determine the aspect of war, so that soldiers can wear this equipment, so that soldiers can obtain more powerful individual combat capabilities, so this equipment is also called individual exoskeleton.

However, his first purpose was not a military direction, his original intention at the beginning was only to enable himself to gain more power in the assembly of large equipment.

As for the application in the military direction, it is completely possible to improve it after the development is successful, which does not mean that it cannot be used in the military at all.

The first thing to do is the design of the mechanical part, and he is still very good at this aspect.

In terms of mechanics, the first thing he has to solve is the transmission system, which direction should be chosen for development.

The two most reliable solutions are one to use a hydraulic system and the other to use a pneumatic system.

If you don't understand it then, in fact, the principle is the same as that of the excavator, but the mechanical arm of the excavator is reduced and improved into a robotic arm that can be worn by the human body.

The power source on the excavator is changed from a diesel engine to a small electric motor distributed throughout the exoskeleton system.

He has never made up his mind about the two reverses of the power take-off system, and hydraulic pressure and pneumatic pressure have their own advantages.

The advantages of the hydraulic system: stable transmission, large drive rigidity, high response speed, and ability to achieve stepless variable speed transmission;

But the shortcomings are also obvious to all, that is, it is easy to cause oil leakage, affect its performance, it is more sensitive to pollution, the purity of hydraulic oil is higher, and the temperature also has a great impact on the hydraulic system.

Compared with the hydraulic system, the pneumatic system is faster in action, the cost of control components is lower, and the structure is simpler.

The disadvantage is that the movement is extremely unstable, the driving rigidity is insufficient, and the precision control is not as good as the hydraulic system.

Listing the advantages and disadvantages of these two systems one by one, compared with each other, he still chose the hydraulic system as the main transmission system.

The main reason is the rigidity of the drive, which means that it is more reliable than pneumatic systems.

As for the shortcomings of the hydraulic system, he just needs to solve them one by one, otherwise it is not a little challenging, and there is not much motivation to do it.

After determining the hydraulic system, the rest is easy to say, at least there is a research and development direction.

With the deepening of the research and development of the power exoskeleton, he also developed the power source that needs to be used in it.

The power source is a small motor, for a small motor, he made a 2.6kw electric motor with 3.5 horsepower when he finished the helicopter model before.

However, this kind of motor is still a little too large to be used in the power exoskeleton, so this kind of motor can only be used on the main branches, and it is not suitable for places that require a small amount of power.

Therefore, he also had to develop a miniature electric motor for the power exoskeleton, and not only the micro and small motors used everywhere, but also a motor as the main power source.

Then he started with power and started the research and development of dynamic exoskeletons.

As the main power source, there is only one requirement for it, that is, the power must be large enough and the horsepower must be strong enough.

Only in this way can the designed exoskeleton armor allow people to lift heavier things, make people run faster and jump farther.

So he designed the two electric motors that were previously designed and used on the White Tiger 200.

On this basis, the main power source used in the exoskeleton should be slowly optimized.

When he started his research in this area, he also felt more and more that his two months in Peking were not in vain.

Because now when he looks at the two electric motors he designed before, he can suddenly know what can be improved in the electric fuselage.

This is the effect shown by his training in Beiping, for the two previous electric motors, Li Zhenhua first optimized.

But it's just optimization, he doesn't want to apply it to the market now, as a qualified company owner, to learn how to squeeze toothpaste.

What's more, update the motor now, and those who have already bought the car in the market will definitely have an opinion.

And the motor he optimized this time, even if it is the company's technical reserve, can be used at any time if you want to use it later.

ps: This chapter is an update of No. 1

7017k