Under the huge open space sunscreen, a huge metal block, a humanoid figure is busy on the metal block.

Before he started the piece of metal, he first asked him to take a sledgehammer around the metal block and knock it at a specific point, and the internal stress that the metal block had to leave for many years to release was released by him smashing it together.

The internal stress is relieved, so that these metal blocks will not be deformed again when they are made into machine tool parts, thus affecting the accuracy of the machine tool.

Dressed in the power armor of Chiyou, he was busy beside the giant metal block, and the soldier wore the gun in his hand when he wore Chiyou, and the fitter tool scraper in his hand when he wore it.

The scraper made of special metal played a huge role in his hand, and the iron filings were scraped off the metal blocks by him, and the shape of the iron filings was so regular.

Don't think that he is holding a scraper in his hand, and the processing of the workpiece is only fine machining, but in fact it is not, now he is making a rough blank, and the scraper is used by him to make a bold feeling, which feels like he is holding a big axe to chop wood.

If there is a reason why he does it himself from the beginning to the end, instead of using tools such as machine tools to make the rough blank first, it is not only because there is no suitable machine tool, but also because he has to monitor it from the beginning of the manufacture to ensure its precision and quality to the best of his ability.

That's why he is so unafraid of trouble, manufacturing it from a rough blank to a rough blank, all for the sake of precision.

There are many, many parts to be used in a machine tool, so there are many parts to be manufactured.

Pieces of metal are scraped from cubes of various sizes into rough workpieces of various shapes, and the work he completes here is the rough blank, but he cannot make the rough blank into a complete workpiece, and those works will not be carried out until the final assembly.

However, the location of the final assembly is not in Kyushu Divine Beast, but in the factory area of the new company in the island city, that is, where the machine tool will be settled in the future, while the machine tool is assembled, and the rough blank is finely processed into high-precision workpieces.

The manufacture of the entire machine tool is extremely troublesome, and there will be various wires, shielded signal lines, and electronic system hardware installed in various parts of the machine in the middle.

Fortunately, it will be very difficult when such work starts, and when the first ultra-high-precision machine tool is born in his hands, then the subsequent machine tool manufacturing will be much easier.

Because at that time, he will not need to manually process the parts, and the newly manufactured machine tool will also come in handy, and the machine tool will be used because he has confidence in his machine tool.

Moreover, he also left some margins for the workpieces that came down from the machine tool, which was when he played a role in this humanoid machine tool, which was also to ensure the accuracy of the machine tool.

When the new company's building is filled with this kind of machine tool giant machine tool, then he will not be involved in the machine tool manufacturing again, and the subsequent work will be completed by the workers of the new company.

At that time, this new type of machining center will be manufactured as a commodity and will be purchased and used by manufacturers who need this kind of equipment, and of course not all manufacturers will need this kind of machine tool, but Kyushu is in urgent need of such a giant ultra-high-precision machining center.

In fact, this kind of machine tool is urgently needed in many military factories, such as the underwater blades of submarines, many parts of the chubby engine, the high-strength fuselage of fighter jets, the keel of the aviation mother, rocket manufacturing, aerospace and so on.

Therefore, the demand for this kind of machining center in Kyushu is still quite large, and in the case of these needs, the new company will definitely not worry about not having work at the beginning.

And the significance of this kind of machining center is not only this, this kind of sub-level machining center will meet a small number of departments that urgently need it, and the rest will be arranged in three cooperative machine tool factories.

On the basis of the next level of machining centers, these three machine tool factories have carried out a large-scale upgrade of the accuracy of domestic machine tools, so as to improve the machining accuracy level of Kyushu as a whole.

The latter has the widest impact on society, and the previous ones cannot be said to have little impact, but this information will not be disclosed to the public on a large scale, and the general public may not know it at all.

And after the machining level is improved, especially after this kind of giant machining center is in the world, Kyushu will once again break the blockade of foreigners for us. The significance of this cannot be explained in one sentence or two, and it may affect the formulation of some national policies and foreign policies in the future.

At least in this regard, Kyushu does not have to compromise too much in the international arena again, and Kyushu's backbone can be straighter.

The pieces of metal that had been transported to this side were finally made into rough billets in his hands after his continuous efforts day and night, and more than two months had passed.

When he finished machining the last rough workpiece, a group of workers were dispatched from the aircraft manufacturing workshop, and with the help of these people, the workpieces began to be packed.

Of course, these workers are also wearing powered exoskeletons, and without the help of equipment, it would be difficult for them to carry out the work of packing.

When the workpieces were carefully packed one by one, Li Zhenhua found an antique transportation company and asked them to transport them by land.

A total of 60 containerized semi-trailers, these workpieces have been loaded from morning to night, each car is only loaded with a bottom, not stacked on top at all, some are so careful.

At this point, the work is almost complete, and the next step is to enter the new company and carry out substantive assembly and other work.

And the hardware side was pushed to this point by him, and he didn't fall behind much in running the software, it should be said that the progress of the software side is faster than the hardware side.

After he finished drawing all the drawings, he began to manually pull the software out of his brain, and every day when he was in the office, he sat in front of the computer and began to type the keyboard, and the top mechanical keyboard had been knocked out in his hand.

It can be seen how much work he has done in terms of software, and now the software he has prepared is still based on the software compiled under the English system, who has made the English system mature after so many years!

At this time, he still chose to use the more secure English system.

When he was compiling the software for running the machining center, he also conducted some research on the Kyushu language.

And this research really made him study something, the Kyushu language system, in the language logic will produce many different interpretations, in the machine language is not rigorous.

But it was this lack of rigor that made him discover some particularly interesting phenomena, he used the software based on the Kyushu language system he researched to compile the language, modeled on the voice assistant on the market, and compiled a voice assistant.

But this very mentally retarded language assistant often makes some answers according to the logic of the Kyushu language, and often these answers are not the answers that should be given by a voice assistant.

This small discovery immediately aroused his curiosity, and this curiosity drove him to conduct deeper research, and finally he came to a conclusion that in the future, Kyushu language has an unparalleled advantage in artificial intelligence.

It is precisely because of the logic of the Kyushu language that this unique phenomenon will be created, and when the simulation is carried out in the virtual laboratory, he also adds an automatic learning function to the intelligent assistant, and then under Li Zhenhua's attention, the intelligent assistant's own program is thinking that the learning function is becoming more and more complex.

No one told him about this discovery, and the intelligent assistant he compiled was not carried by him from his mind to reality, because he was in awe of the unknown, for fear that something would be out of control in reality.

So he is very cautious in this regard, maybe when he really understands the artificial intelligence assistant he made in the future, he will bring him to reality.

After the antique transportation company completed the loading, Li Zhenhua also took these workers transferred from the aircraft workshop and set off towards the new company in the island city, of course, his travel mode is still the mode of protection of many bodyguards.

He had to lead the way, and behind him was a convoy of sixty containerized semi-trailers, and under his guidance, the convoy drove up the highway and headed straight for the island city.

As for the high-speed convoy, no matter how fast Li Zhenhua was acting as the open car in front, the trucks behind were always in a constant movement of 100 kilometers per hour, and even if they slowed down, they were still moving together.

In fact, Li Zhenhua doesn't have to worry about what problems will happen to the transportation fleet behind them, they are very experienced in transporting antiques, and the workpieces transported this time are being carried out in the way of transporting antiques.

At the back of the convoy was a White Tiger car, and the huge space inside had been converted to look like a dispatch room, and the entire convoy could be seen from there.

And above the convoy, there are four drones flying, monitoring the convoy at any time.

Especially after the Kyushu Divine Beast researched the high-density graphene battery, this kind of battery with high energy density in Kyushu has affected many aspects, and the white tiger car of the Kyushu Divine Beast they are driving now, as well as the drones flying in the sky, all use graphene batteries.

So that some of the previous transportation solutions that could not be realized, or were not easy to achieve, were implemented.

Along the way, the transport convoy did not have even a peak accident under the dispatch, and was transported to the island city by them in the safest and fastest way.

And in the process of transportation along the way, the return rate can be said to be extremely high, whether it is a private car or a transport truck, they are shocked by the transport team composed of 60 vehicles, everything is so orderly.

Some private cars have no feeling when they first overtake, but they can't finish the convoy afterwards, and the convoy is so long that some private cars miss the next stop.

After entering the island city, the people on the side of the new company in the island city were waiting at the highway entrance, and after seeing Li Zhenhua and their arrival, the work of guiding the way was also handed over to the people here.

And Li Zhenhua's convoy also broke away from the transport convoy and drove towards the location of the new factory on its own.

This is the first time he has come to the new factory in the island city, and the next step is to process and assemble, he wants to inspect the site to see if the newly built plant and other facilities here are in line with the factory design plan he gave before.

If there is something that can't be built, it's better to put it forward now and let people rectify it, and wait until the machining center is assembled to carry out the rectification, then it's really too late.

In order to prevent the earthquake of the new factory, he designed several shockproof ditches for the factory, in order to prevent the vibration from affecting the machining accuracy of the machining center, and the rectification of the plant will inevitably produce vibration, which will affect the accuracy, so if there is really an inappropriate place, now is the most suitable time for rectification.

Five cars came to the new factory, and the employees of the three companies who had known that he was coming, as well as the management personnel of the Ministry of Industry, all came out to greet him, and then accompanied by these people, began to inspect the entire factory.

Although he seemed to be wandering around the factory, the real situation was that he had already made the size of the pair clear everywhere, and the size was clearly compared with the design drawings in his mind, which really made him find a lot of small problems.

But these small problems will not have any effect, so he did not bring it up, it is nothing more than in the process of use in the future, it will cause some small troubles to the user, but it is harmless.

If he pointed out these small problems, it would undoubtedly make those partners think that he was looking for trouble and picking bones in the eggs, so Li Zhenhua knew but he didn't point it out.

In the space where he circled around the factory, those transport convoys also came here under the leadership of the guides, but there were not enough places here for all the transport convoys to stop.

Fortunately, the location of the factory is very remote, and there are not many vehicles on the road to the factory, so the team is parked on the side of the road, and then it is waiting for the unloading time.

In fact, the vibration of the truck is very large, but fortunately, there is no processing center and other equipment at this time, and after the processing center is officially put into use, then this large transport vehicle will be strictly in accordance with the process of entering the factory.

Take the shock-absorbing road that is specially designed for transport trucks, so that it does not have any impact on the machining center.

All these things were summarized by Li Zhenhua in the virtual laboratory after a long time and a large number of experiments, during which he revised and revised the design drawings of the plant I don't know how many times.

It can be said that it is extremely strict, and all these things are made for the preparation of the machining center in the future, or for the preparation of the machining accuracy of large workpieces.

This rigorous preparation is not useless, nitpicking, and simply finding faults, all of which are reasonable, and the three partners, after seeing the design plan, all put away their contempt.

I am also more and more admired for the Kyushu Divine Beast!

7017k