Thinking while visiting, Li Zhao is also thinking about the future work sequence, first of all, to get out of the manpower agricultural machinery, this is very important in this era, as long as the grain planting area, the output is increased by a few percent, plus the fertilizer that slowly came out later, you can solve the problem of eating, after all, the population is not as much as after 60 years.

Then there is the transformation of the equipment, which is estimated to take a long time, and it is estimated that there will be trade-offs, and some of the ones that should be eliminated must be eliminated. In this process, it is necessary to design some high-precision machine tools first, so that some of them can be transformed, and then part of them can be designed and manufactured by themselves, which can significantly improve the production capacity.

At the same time, the transformation of other facilities in the plant area should also be carried out, not to mention steelmaking and coking, there are experts in the factory, plus Li Zhao, the design will be more reasonable. At the same time, according to the vision of 60 years later, the utilization rate of various resources can also be significantly improved, and the emission of various pollutants can also be greatly reduced.

Li Zhao has probably seen it, the factory is actually very lacking in motors, and the ability to produce motors by themselves is not very good, these Li Zhao can solve them, Li Zhao's motor maintenance ability in his previous life is relatively strong, the motor burned out in the small machinery factory in the past, he can repair the coil himself, the design of those motors is much more advanced than now, not to mention the higher efficiency of brushless motors, as long as the motor production keeps up, it is easy to transform.

The third step is to see if we can cooperate with the school to engage in joint research and development, and get the CNC machine tool out, Li Zhao has no problem with the structure, materials and other mechanical accessories, that is, the control system needs to be found by the school, and Li Zhao is really not good at this piece.

I haven't had much contact with it in my previous life, and in the past, when there were problems with electronics, I either changed it or asked someone to fix it, which really won't happen. In this life, he learned all the old-fashioned things, he really can't do anything about chips, at most he can come up with some ideas, he knows the principle, in his previous life, because of the chip fever, he probably browsed the relevant information. But he did his own research, he really didn't know the bottom of his heart, unlike the mechanical aspect, which was another scientific field, and he just knew a little more.

The fourth is the engine and vehicle, which can be made according to the actual situation, especially various special vehicles, which can be a big killer to improve production efficiency. Engine Li Zhao has been prepared for a long time, when he was in school, he was either soaking in the library or drawing, and over the years, he has also completed several series of drawings, these are all later words, and I will talk about them in detail later.

The fifth is the material, Li Zhao knows that the rolling mill now has an oxygen side blowing converter, and now because of the difficult period, the oxygen top blowing converter can not be built, but after three years, the oxygen top blowing converter can be made, and then it is time for him to engage in all kinds of high-performance steel, with a variety of high-performance steel, you can get some special engines.

The above is estimated to be enough for Li Zhao to be busy for more than ten years, and Li Zhao can't help but slowly calculate in his heart. Seeing that the sun began to set westward, Li Zhao also returned to the fitter workshop, at this time, they were about to get off work, and some of the fast ones had already begun to clean up the workbench and clean up.

An uncle is now helping to check the completion of the work of the workers, including product quality sampling, output statistics and warehousing, health supervision, etc., depending on the situation, the work completed today should be good, with a smile on his face, he kept measuring the workpiece with calipers, and chatted with the young man next to him.

looked at that person, it was Jia Dongxu, Qin Huairu's husband, who was following Uncle Yi to help him with the parts, and put the measured parts in place. Jia Dongxu's death, there is no explanation in the original play, only that Qin Huairu died in an accident when she was pregnant with acacia flowers.

There are different opinions about the specific time of death, some say that it was 62 years, some say that it was 61 years, some say that it was just in time for the locust tree to bloom when he died, and some say that the locust tree bloomed when the locust flower was born, and the specific time of death is not clear. Li Zhao thought about it and did not determine the specific time of death.

When the all-staff meeting was held yesterday, I heard that Qin Huairu was pregnant again, less than a month, so calculated, when the locust flower was born about March to April next year, it was almost the time when the locust tree bloomed, but there are several kinds of locust trees, some of which bloom in spring, and some of which bloom in summer, and now it is the flowering period of the summer flowering locust tree, so Jia Dongxu may die at any time.

Let's talk about Jia Dongxu's death, some say that he was stoned to death in an accident by operating the machine tool in violation of regulations, some say that he was rolled into the machine and hanged, and some say that he was killed by falling steel by illegal hoisting, in short, the death method is a mystery. However, looking at Jia Dongxu, who was a little thin, Li Zhao felt that it was more likely that he was hungry, couldn't eat enough for a long time, and then had low blood sugar, which caused dizziness at work, and was caught in the machine and hanged.

To be honest, the stories in the TV series can only be used as a reference, and people in this era are really not fat. Except for a few families with two or three or more workers, and all of them have urban hukou and can live a good life, most families are tight, and it is difficult to eat enough.

The best example is the third master Yan Bugui, the third master only has a salary of more than 30 yuan, a family of six, each person only has an average of five or six yuan per month, and if you want to survive, you can only be calculating. For example, the fine grain stamps of the three great masters have been replaced with coarse grains, and the amount of each person is fair, and such a calculation is conducive to survival.

Of course, the calculations of the three masters are also excessive, and some calculations are even more ruined by the three views, such as their children have to pay money for eating, listening to the radio, and paying for bicycles, etc., these calculations have also led to their children's centrifugal detachment. However, on the whole, the three masters did not rely on others to support the family, and they are also a microcosm of most people in this era.

And Jia Dongxu is even more sad, a single-parent family, the conditions are too poor, Qin Huairu is a rural hukou, and it can be seen from the sentence that Jia Zhang's asked Qin Huairu in the TV series if she wanted to drive her back to the countryside, Jia Zhang's is also a rural hukou. Now a family of five, with only one person, how can they eat?

Some people may not know that Jia Dongxu's urban hukou was only opened because he entered the rolling mill, and he has a quota. In this era, the child's household registration follows the mother's household registration, Qin Huairu is a rural household registration, and the stick terrier and Xiaodang are also rural household registration, so Jia Dongxu's family has only one urban household registration.

Although Jia Dongxu's work is heavy physical labor, and the ration is higher, Jia Dongxu's consumption is also large, and the ration of one person must meet the needs of five people, and the ability to live these years is completely dependent on the help of an uncle. Normally, it's okay, but now that Qin Huairu is pregnant again, in order to increase Qin Huairu's nutrition, Jia Dongxu is likely to give Qin Huairu a part of his already small amount of food, so it seems that it is more likely that he will not be able to eat enough for a long time.

Li Zhao is not easy to inquire about Jia Dongxu's specific situation, but as far as today's point of view, Jia Dongxu's work attitude is still good, and it is estimated that Jia Dongxu was mainly disciplined by his father when he was a child. From the small talk, I heard that Jia Dongxu is a third-level worker, and judging from the salary of less than forty, Jia Dongxu's cultural level should be relatively low, otherwise he would not have risen so slowly.

Look at Jia Dongxu's situation now, maybe it won't be too long, something will happen, and when the time comes, let's see if I can pull him, so that Jia Dongxu doesn't have an accident, and what happened to He Yuzhu in the future will be changed.

Of course, these are just speculations, after all, there is no explanation in the TV series, and I can't inquire so clearly now. The reason why Li Zhao guessed so much was because of the first uncle, if Jia Dongxu didn't perform very well, the first uncle would not regard Jia Dongxu as a pension support.

Later, He Yuzhu was recognized, not because He Yuzhu was filial to the deaf old lady, otherwise no matter how much the old lady mentioned it, the first uncle would not identify He Yuzhu. Seeing this, Li Zhao also went up to say hello: "Uncle Yi, Brother Jia is done, right?" ”

"Yes, look at the quality of these products, you can get off work in a while, you are going to the coking workshop, covered in coal ash?" Uncle Yi looked at Li Zhao and asked. Next to him, Jia Dongxu also replied, "I'm done, wait for the master to get off work together." ”

"Yes, technician, I'm going to work tomorrow, and today I ran most of the workshops in the factory to understand the production situation, so as to provide a reference for the official start of work, after all, there is no right to speak without investigation." Thinking of the situation in each workshop, Li Zhao replied with a heavy heart.

"College students are different, and their consciousness is stronger than those muddy boys who don't study, but what problems have you found here, and your face is not very good?" Looking at Li Zhao, who was not in a good mood, Uncle Yi asked strangely.

"Yes, there are a lot of problems found, you are an eighth-level worker, have you found the same part, the drawings made by the same person, some parts produced by the machine are either large or small, and it is always like this, and the inspection machine can't check any problems, right?"