When the first uncle heard Li Zhao's words, his eyes couldn't help but glow, Jia Dongxu was an uncle who grew up, and he was also relatively satisfied with Jia Dongxu, but the cultural level was lower, and he only had a high school education, which is equivalent to graduating from primary school now.

After entering the rolling mill, an uncle accepted Jia Dongxu as a disciple and taught carefully, but Jia Dongxu's talent is not very good, although he is more motivated, but he has been in the factory for almost ten years, and now he is only a third-level fitter, and it is a little reluctant to become a fourth-level fitter.

Now that Li Zhao is helping to change positions, the work can be easier, the salary can be a few yuan higher, and his family's life can be better. And after the job transfer, he is considered to be in a semi-full-time state, and he usually has more free time, and it is convenient for him to take him again, and strive for the autumn promotion assessment to be successfully promoted, Uncle Yi can't help but think so.

In fact, this can't be blamed on Jia Dongxu, he is not talented enough, dragged down by the level of education, and the amount of knowledge is not enough, in fact, many operations in the workshop production, Jia Dongxu is only half-understood, this is not only Jia Dongxu's situation, but also the situation of most employees in the workshop. And a senior fitter like Uncle Yi, basically relying on talent and experience to become an eighth-level fitter, for a lot of things he also knows a little about, just know what to do, and for people with low talent, you tell him what to do, without telling him why he did it, these skills are difficult for him to master.

For example, there is a joke about screwing, Hans cat workers screw screws three times, back half a turn, and people who don't understand think, isn't this just two and a half turns? As everyone knows, it is this half turn that can solve many problems such as broken screws, slippery wires, and jamming.

The straightforward point is that when the screw is tightened to the tightest, the thread is in a deformed state, and the half-circle thread is just in a normal state, and it is just right to make the wire teeth of the bolt and the nut in a state of anastomosis. And these are experiences for many people, and they can't explain the principle at all, and for people like Jia Dongxu, it's two and a half turns.

In fact, directly screw two and a half turns, without returning to this half turn, after the screw is tightened, the thread is still in a deformed state, so that the bolt will lose its elastic deformation ability when the vibration is too large or the pressure is too large, so as to break.

Therefore, it is a little difficult for Jia Dongxu to learn fitters, a lot of experience he is rote memorization, and he does not understand why he operates so much, in this case, it is not a big problem to process some simple parts, because the operation is not difficult, but he can not understand some complex parts and some steps.

For example, if you use a lathe to turn a complex part, there is an optimal processing sequence, if the optimal sequence is ten steps, people who understand will use this sequence, so that it can be completed in the shortest time, and the machine load and wear are minimal, and Jia Dongxu is difficult to find out this processing sequence, others can complete the processing in ten steps, and he may need more than a dozen steps, this is the gap.

And many times the promotion task is this kind of part, you don't have enough understanding of the technology, and there will naturally be various problems during the assessment. The final result is that your processing speed is not as fast as others, the processing process is not as stable as others, and the equipment wear and consumption are greater than others, so how can you be promoted?

"This is a good thing, your brother Jia and their family are a little difficult, usually I try to help a little, but the amount is just a little, your aunt is not in good health, the fine grain at home is all eaten by your aunt, and I can help him is limited. This can become a team leader, the salary can be a few dollars higher, and the labor intensity is reduced, and they can live more easily. And his talent is also average, this autumn promotion assessment, the grasp is not too big, now there is more time, I can take him more, and strive to pass this time. So what should I do about this, and do I need to prepare something? Uncle Yi asked.

"This matter is simple, you don't need to prepare anything, after dinner, I will go to your workshop Director Guo with you, as long as he nods, let's go and talk to him together, this matter will be settled." This matter was just decided at the morning meeting, and it is estimated that it will not be until tomorrow to spread the word, and others do not know about it, so I will go to him after a while, and he will definitely give this face, after all, this job is quite simple, as long as you are literate, you can basically do it well. What's more, Brother Jia has been learning from you, and his ability is still good, so you have to give your face, Director Guo. ”

Li Zhao is telling the truth, now the whole factory has benefited from Li Zhao, everyone understands that Li Zhao will be able to soar in the future, sell some face now, and you will be able to harvest more than ten times in the future.

And because of Li Zhao, each of them still has a few recruitment places in their hands this year, but this benefit has really been given, who doesn't have a few relatives, and the rolling mill work in this era is a good job.

What's more, there is an uncle, he is one of the few eighth-level fitters in the workshop, and many difficult jobs have to be done by him, and the uncle doesn't know about this, if he knows that he is nine out of ten when he goes by himself, not to mention Li Zhao.

Saying that, the two came to the cafeteria, and the food was still the same, steamed buns, wotou, two and noodles, potatoes, bean sprouts, and cabbage, Li Zhao was speechless when he looked at this dish, and it was estimated that this menu would take ten days and half a month.

Seeing Li Zhao's expression, Uncle Yi couldn't help but say: "This is still good, now go to the vegetable market to buy vegetables, these are the three things, or according to the quota, at least in the canteen you can mix a full meal, many people can't mix a full meal." ”

Li Zhao also nodded helplessly. After finishing the meal and walking to the seat, Li Zhao saw a few acquaintances, who were the workshop directors of several workshops, and Li Zhao also pulled an uncle to them at this time, just so that he could talk about things here, and he didn't have to run again. As soon as they sat down, several workshop directors hurriedly said hello, they were all impressed by Li Zhao today, so they were very polite to Li Zhao.

"Li Gong, when will the drawings be sent to the workshop, we are all waiting for the rice to be put into the pot, and we are all ready to do a big job." This is the director of the welder workshop Wu asked.

He was the main force this time, and the other workshops could be said to be cooperating with him, so he was also extremely excited, and when he saw Li Zhao, he began to ask questions, and the heads of other workshops also began to echo. In fact, this dinner they are like a small meeting, how to cooperate with the production in the back, although they all know Li Zhao's plan, but how to cooperate has to be discussed, after all, they are not close, and there is no conveyor belt between the workshops.

"Soon, the drawings of each part can be sent to each workshop at about three o'clock in the afternoon, and the drawings for warehouse renovation have been given to logistics in the morning. Just now I went to the fitter workshop to see that the logistics has been measured there, cement sand or something has been transported, it is estimated that the afternoon will be able to start the transformation, are simple things, mainly cement dry point time, need to pay attention later.

In addition to logistics, first of all, it is necessary to cooperate with the fitter and welder workshop to make the production line, which should be completed in more than two hours, and the things are not complicated. Li Zhao replied.

"Electricians don't need tomorrow, the morning maintenance side has begun to transport wires, when I came over, they were almost ready, it is estimated that it will be built together with the renovation of the plant in the afternoon. According to what you said, the production line will probably be assembled tomorrow morning. Director Wu of the welder workshop said.

Li Zhao is also surprised, the enthusiasm of these people is really high, according to this calculation, tomorrow afternoon can start to debug the production line, after all, there is no inverter now, the running speed depends on the size of the pulley to complete the adjustment, once determined, the speed can not be easily changed, which requires manual debugging of the transmission speed between the various workbenches, to ensure safety at the same time, to ensure the production speed.

After chatting about the progress in the workshop, Li Zhao said to Director Guo of the fitter workshop: "Director Guo, please excuse me, Comrade Yi Zhonghai is an uncle in our compound, and he takes good care of me. ”

Director Guo was also very happy when he heard this, Li Zhao was the object to befriend, and the request was very simple, how could there be any reason to disagree, so he returned directly: "What is this, it's Jia Dongxu, I'll report it in the afternoon, is there anything else I need help with, I still have three recruitment places in my hand, do you need it?" ”

This is a few other directors also hurriedly said, saying that they also have three recruitment quotas in their hands, at this time the master is stupid, this is too simple, just agree in one sentence, and there are more recruitment quotas that can be used casually, so many people, this is not to recruit dozens of people.