In fact, this time, the happiest people in the middle are a few people from Da Mao, as long as they can successfully transform this equipment after returning to China, then they must be fame and fortune. Although it is difficult for them to achieve the accuracy that Li Zhao has transformed today, the reason is also very simple, this requires high-precision machine tools or senior technicians such as eighth-level workers.

If these resources are used, the cost is quite high, and a single transformation can be dozens of man-hours. To the extent of Li Zhao's transformation, in Da Mao's place, the money for half a piece of equipment may go directly in. But if they reach the accuracy required by Li Zhao at the beginning, then they will all make a lot of money, and this accuracy is the accuracy that is more commonly used by equipment.

And this kind of equipment, which is also a kind of equipment that they have a lot of there, is successfully transformed, and it can basically be guaranteed to be used for another ten years, no matter how it is calculated, it is very cost-effective. The most important thing is that Da Mao has relatively less sophisticated equipment, and it is not difficult to transform this equipment to the accuracy of two filaments in batches. Although Li Zhao regretted it, there was no way, he couldn't cover it and not show it.

After being busy with this equipment transformation, Li Zhao does not plan to engage in equipment transformation in a short period of time, first, he does not want to cheapen others. Although there are still two models in his hand that have been drawn, they are all equipment on Da Mao's side, and these are more updated than the one that was transformed today, once transformed, Li Zhao felt that he was too much of a loss. These two types of equipment must have a lot of equipment in Damao, but there are not many of these equipment in the rolling mill, so it is necessary to destroy the enemy.

The second reason is that Li Zhao has had too many things recently, and Li Zhao no longer dares to open new projects, even if it is such a small project. Just like this transformation, if you count the time, it probably took Li Zhao himself at least seven or eight days, one is that it is very troublesome to produce drawings, Li Zhao needs to compare the drawings of this machine for several periods, especially surveying and mapping, maintenance drawings, and maintenance parts drawings, etc., it is too time-consuming.

If there is no surveying map, it is even more troublesome, and it is necessary to disassemble all the equipment and then carry out surveying and mapping, and then the situation of the equipment can be studied. After these studies are thorough, there are various calculations, and then various parts drawings are given according to the calculations, and finally manufacturing, assembly, and adjustment. In general, it took a lot of time and energy, and Li Zhao didn't dare to be distracted at all now, so the transformation of the machine could only be postponed.

What Li Zhao has left in his hands now can be said to be major projects, the kind that can't be unexpected at all, and each of them involves at least tens of millions of investments. And the largest is the equipment factory, Li Zhao designed these equipment will be born at least ten factories, the investment is also over 100 million, you must know that the national financial revenue is only about 30 billion now, do anything casually, it is not enough to spend, can come up with so much money, it can be seen that the importance of the project.

After a period of excitement, everyone went home from work, but now it was relatively late, Li Zhao looked at the time, it was almost six o'clock, and it was another day of overtime. After going home for dinner, I still need to go to the workshop to have a look. Now that the workshop has begun to transfer materials from other places, Li Zhao is not at ease at all, although he is now rehearsing the future production scene, but Li Zhao does not dare to be careless at all.

Now Li Zhao needs to bring out the inspectors, if the material factory does not have the testing ability, then how to ensure product quality in the future, how to study new products? Now is the simplest stage of testing, quantitative analysis of the composition of raw materials, which is also the most important basis for the production of alloy steel. Li Zhao is to equip the rolling mill with a comparison table of composition and material weight, and then mark the corresponding number according to the requirements of the comparison table when producing.

On the production side, according to the number, select the corresponding number of auxiliary materials for production. In fact, this is a very good way to operate, many people always emphasize the need to give full play to the subjective initiative of employees in production, in fact, it is a false proposition. The subjective initiative of employees is to do the least work, get the most money, what management really needs to do is to let employees understand, what needs to be done, how to do it, how much to do.

Now, although each factory has provided the composition analysis table of the product according to Li Zhao's requirements, and Li Zhao has also made a specification list of the material according to their ingredient list, how can Li Zhao be sure of the accuracy of the ingredients? And most importantly, people make mistakes, and if the materials sent are wrong, the losses will be huge, especially for military materials, and the consequences will be unbearable for anyone.

So now that the composition testing department has been added, what Li Zhao needs to do now is to bring out the people who test the composition of the material, these tasks are very critical, and Li Zhao does not dare to be sloppy at all. In the future, these people will also develop the testing department of the material factory, which will not only test the raw materials in the future, but also need to test the physical and chemical properties of the finished products, and the future role is very critical.

Thinking that Li Zhao also began to walk out, at this time, a group of factory leaders surrounded him, and Director Yang asked: "The machine tool we are going to manufacture is accurate to this extent, right?" Didn't you say that it would take at least two rounds of improvement to get to this point? Why did I reach it directly today, and now I'm still a little confused. ”

At this time, Li Zhao had to put aside the words that had been explained several times, and finally did not forget to emphasize: "I am preparing this round to transform the accuracy to two wires, so that the parts produced by this equipment in the future will not need to be polished by senior technicians." But I didn't expect that after I explained some principles to those senior technicians, they were so attentive this time, I asked for a slight tolerance, and they were stunned to do it by one micron, which I didn't expect. ”

Director Yang listened to Li Zhao's words and said: "No matter what, the transformation of this equipment is very successful, which can be regarded as a reassurance for our machine tool project, and I am relieved." Not only that, but the leaders should also rest assured that your transformation this time has completely confirmed your design ability. ”

Director Yang's mood at this time is quite good, the machine tool project investment is very large, the project is initiated by the rolling mill, once there is any situation, then Director Yang is to blame, his pressure is conceivable. Now that there is a real machine tool as an example, Director Yang is naturally relieved, and it is already an explanation.

At this time, Director Yang also asked: "Which machine tools will be transformed next?" I'm a little impatient, if our equipment can reach this level of accuracy, then there is nothing that our rolling mill can't make. ”

Li Zhao had an idea, so he said: "I don't plan to transform the machine tool recently, I need to keep an eye on too many projects now, especially the blast furnace project now, which is a huge challenge for us, and it is also the first time I have presided over a big project, and I dare not relax." Now I have two designs in my hands, but they are more backward than today's machine tool, we are now transforming, basically a capital enemy, I don't want to change it. ”

Hearing Li Zhao's statement, Director Yang also gave up, thinking about this incident, it was a big loss. If there is still a large wool production of equipment in the back, it is also difficult to hide from the experts of the big hair, then the loss will be even greater.

Thinking of this, Director Yang no longer asked Li Zhao to continue the machine tool transformation project. Now it is true that you can't lose a big because of a small thing, for other projects, the transformation of machine tools is a small sesame seed, if other projects are completed, and then come back to transform these machine tools, it will become a piece of cake.

Soon arrived at the office downstairs, Li Zhao went back to the office to clean up and go home from work.

A few days have passed in a blink of an eye, and after the weekend, these days have been calm, and Li Zhao is also walking a fixed process every day. In the morning, I discussed and solved problems in the blast furnace project team, or reviewed the drawings, and in the afternoon, I stared at the machine tool project team, or reviewed the drawings, and when I had time, I prepared the materials of the tricycle project, or drew the drawings of the tank power system that I promised, which was busy and orderly. Of course, it is not necessary to inspect the workshop every day and take time to visit the material factory.

Li Zhao came to the material factory today to star, today is the day when the material factory poured the column, after nearly a month of solidification, today is finally ready to pour concrete. In fact, time is running out, fortunately there has been no snow recently, but in a few days it will be winter, I really can't wait, and I don't want to put it into production this year later.

As soon as Li Zhao came to the material factory, he was called aside by Master Zhang, and said to Li Zhao mysteriously: "Let's go, take you to see the strangeness." As he spoke, he couldn't help but pull Li Zhao towards the direction of the barracks.

Li Zhao couldn't help asking, "How can there be new equipment?" It can't be a new tank coming out, right? That's too fast, isn't it? ”

Master Zhang sold the guanzi and said, "Don't guess, you can't guess, you'll know when you get to the place." As he spoke, he called the orderlies and asked them to prepare the vehicle and prepare to take the car over.

Li Zhao was very puzzled and asked, "Where are you going, and you still need to take a car?" We're on business today, so we can't afford to waste time, I need to keep an eye on the concrete pouring. If something goes wrong, it will really affect our production date, which looks like winter is about to start, I don't know when it will cool down again, I can tell you, if we can't pour the concrete well in the near future, in case of snow, we will be in trouble. ”

"Brother Shen!"

"Hmm!"

Shen Changqing walked on the road, and when he met someone he knew well, he would say hello to each other or nod his head.

But it doesn't matter who it is.

There was no superfluous expression on everyone's face, as if they were very indifferent to everything.

on this.

Shen Changqing is used to it.

Because this is the Demon Suppression Division, it is an institution that maintains the stability of Great Qin, and its main responsibility is to kill demons and monsters, and of course there are some other side jobs.

Arguably.

In the Demon Suppression Division, everyone has a lot of blood on their hands.

When a person is accustomed to seeing life and death, then he will become indifferent to many things.

When he first came to this world, Shen Changqing was a little uncomfortable, but over time he got used to it.

The Demon Suppression Division is huge.

The people who can stay in the Demon Suppression Division are all powerful masters, or people who have the potential to become masters.

Shen Changqing belongs to the latter.

Among them, the Demon Suppression Division is divided into two professions, one is the town guard and the other is the demon exterminator.

Anyone who enters the Demon Suppression Division starts with the lowest level of demon slayer.

Then step by step, he is expected to become a town guard.

Shen Changqing's predecessor was a trainee demon slayer in the Demon Suppression Division, and he was also the lowest level of the demon slayer envoys.

Have memories of the predecessor.

He is also very familiar with the environment of the Demon Suppression Division.

It didn't take long for Shen Changqing to stop in front of an attic.

Unlike other places full of slaughter, the attic here seems to stand out from the crowd, and in the bloody Demon Suppression Division, it presents a different tranquility.

At this time, the attic door is open, and there are occasional people entering and exiting.

Shen Changqing only hesitated for a moment, and then stepped in.

Access to the attic.

The environment has changed in vain.

A burst of ink fragrance mixed with the faint smell of blood came to his face, making his brow furrow instinctively, but quickly stretched.

The smell of blood on everyone's body in the Demon Suppression Division is almost impossible to clean.