With Li Zhao's approval, all they have to do is to find some people who are relatively lacking, and then work overtime to study. After all, after coming to the material factory, they know that they will not lack research funds in the future, the main thing is to find ways to research, and then come up with results. What's more, they also know about the long-term research project, and it can be said that what Li Zhao has taken out now is enough for them to study for a lifetime.

Sending everyone away, Li Zhao went back to the rolling mill, in the short term, Li Zhao's focus is still here, only when the blast furnace construction is on the right track, Li Zhao can focus on the material factory. The research that is being done over there can be said to be relatively simple, really difficult things, and it has not yet officially begun.

Back in the office, Li Zhao also began to sort out his information, after all, Li Zhao now has an office in the material factory, although there is a safe here, but after all, no one is standing guard. Although the security work here is now handed over to Commander Zhang, after all, this side is mainly in the civilian field, and it is impossible to manage it as strictly as the material factory.

From time to time, the relevant information is put on both sides, for example, for civilian convenience, Li Zhao is ready to stay in the rolling mill, and for the military side, Li Zhao is ready to take it to the material factory after a while. Flipping through it, Li Zhao suddenly stared in front of him, and what appeared in front of Li Zhao was a drawing, which was the third machine tool that Li Zhao was going to transform last year, but at that time, because of Da Mao's horizontal insertion, it was not carried out at that time, and he was going to stay in this year's pit for others again.

Li Zhao has been busy forgetting this set of drawings, if it weren't for this time to sort out the information, I don't know how long this would have been forgotten. Looking at the drawings, Li Zhao is also quite entangled, now the new machine tool will come out soon, this transformation is meaningless, after all, the rolling mill will be updated soon. And in the foreseeable future, there will be upgrades across the country, and this drawing basically has no practical significance.

After watching it for a while, Li Zhao began to classify his materials again, and soon it was completed, Li Zhao directly sorted and packed the materials that needed to be taken away, and then found the patrol troops and asked them to escort the materials to his office in the material factory. And Li Zhao himself took the information to find Director Yang, and when they met, Li Zhao handed the drawing to Director Yang and asked him to take a look at it first to see if he still remembered it.

At this time, Director Yang asked while receiving the drawings: "What is this, is there any good project?" You haven't started a new project in a while, so I'll see what it is, and this is the first one you've gotten in a while. ”

Li Zhao saw Director Yang say this, and didn't care about him, drinking tea by himself, and after watching for a while, Director Yang asked in surprise: "This is one of the machine tool transformation projects that I brought last year, right?" Isn't this one turned in? ”

Li Zhao saw that Director Yang thought about it and said: "That's it, I found this when I was sorting out the information today, so I came over to ask, how is this handled now, we don't need to transform this, how are the superiors going to deal with it, and do you want to make a big deal with them, after all, I said last year that there is a transformation plan this year." ”

Director Yang said: "You say this, I don't know what the superior is going to do, but I estimate that the superior is fishing now, after all, the pole is not a good deal, do you have any ideas?" ”

Li Zhao saw that Director Yang asked, and also said: "The material factory has begun the research on the numerical control of machine tools, and in my estimation, it will be possible to have results by the end of the year at the earliest." At that time, the production speed of ordinary machine tools will be much lower than that of CNC machine tools, and I am wondering if our ordinary machine tools can export big hair. You must know that these machine tools are at least ten or eight years ahead of Da Mao, and once they are numerically controlled, they will be ahead of an era. ”

Director Yang said: "You mean, after the CNC machine tool comes out, the machine tool we are studying now is considered a backward product, right?" But even if it is a backward product, it is also the top equipment, it is the equipment that we can't think of in the past, what does this have to do with this machine tool transformation project? ”

Seeing Director Yang asked, Li Zhao said: "I want to use this set of machine tools to suppress the development of machine tools in other countries, in my estimation, our production costs will be much lower than other countries, if we can sell this set of equipment in batches, then it is bound to affect the profits of other equipment manufacturers." This can not only bring us money, but also limit the development of other people, I think this business is very necessary, but I don't know what the superiors think. ”

At this time, Director Yang also frowned and asked (this chapter is not finished!) )

Chapter 350: The Forgotten Project

said: "Then won't others copy it when they take it back?" Once they imitate, our losses will be too great, after all, there are physical objects, and imitations are much simpler. ”

Li Zhao smiled: "This machine tool imitation will be very difficult, I am probably sure that within five years the world should be difficult to have a complete imitation of the country, even if the cost of imitation will be several times ours, and we can not tell the secrets in the early stage, so that many people may not be able to install it directly after dismantling." ”

Although this principle is very simple, and in the future, it will become worthless with the improvement of machining accuracy, but in this era, such a low assembly temperature is definitely the first time. After all, the times are different, and after 60 years, many very simple things are high-tech in this era, not unexpected, but few people think about it.

When Director Yang heard Li Zhao say this, he asked, "Can you guarantee that our equipment can always be in the leading position?" If we exit and then quickly overtake us, we really don't have more to gain. ”

Li Zhao said: "Who can say this thing, but I am still quite confident in coming up with CNC machine tools at the end of the year, and I should be able to achieve three-axis CNC machine tools within five years, I think it should be possible, as for the five-axis, it mainly depends on the speed of development of computers, and we are far from this piece now." ”

After hearing this, Director Yang asked, "Then what are you going to do with this set of drawings?" This set of drawings is also quite advanced. ”

Li Zhao saw that Director Yang finally asked here, Li Zhao said: "I don't have any ideas for this set of drawings, I just want to give it to Da Mao, don't be too ruthless." After all, if we really export machine tools, Da Mao is definitely our most important market, their demand for machine tools is very high, don't offend customers. ”

Director Yang said: "Why don't we discuss with the leaders together?" This can only be decided by the superiors. ”

Soon the two saw the leader, and after saying something, they rushed to the team leader, after all, this matter is a big deal, not they can decide, after reporting the matter, the team leader asked: "You mean to let go of the exit of the machine tool?" ”

Li Zhao said: "Team leader, not directly let go, I mean after looking at the effect of our CNC machine tools, and then decide whether to let go according to the effect, but I estimate that at that time, you will not be able to see ordinary machine tools." And this time should not be too late, we can probably achieve the initial transformation in the era, five years to achieve three-axis CNC machine tools, as for the five-axis, I estimate that it will take at least ten to fifteen years. ”

The team leader was also a little surprised at this time and asked, "Is it okay so soon?" You're not going to make one that isn't practical, are you? What we need is equipment that can be practical, if the computer is the size of a few houses, it definitely can't, I know you want a few research institutes, but what you said is not simple. ”

Li Zhao said: "Of course, it is not simple, and now we have retrieved a full set of information on tube computers and CNC machine tools. The first step we are going to design is to do 50,000 operations per second, and the target volume is less than one cubic meter, of course, I am not sure how big the final volume will be, but it should be much smaller. ”

Hearing Li Zhao's introduction, the team leader became interested, this computing speed is not slow in this era, although it is several times worse than the international advanced level, but it is also advanced. If such a computer can really be realized, then the application can be wide, and CNC machine tools are only one of them.

The team leader thought for a while and asked, "How much will it cost you?" It's not okay if it's too expensive. ”

After all, the price of transistor computers is very high now, taking IBM7090 computer as an example, the computing speed is only more than 200,000 times per second, but the price is as high as 2.9 million US dollars.

Li Zhao said at this time: "The target I set for the research institute is 100,000 yuan per unit, so the first step is to find a way to reduce the price of transistors, and at the same time reduce the volume of transistors, so as to fundamentally reduce the price." ”

The team leader was also happy to hear this price, after all, the slightly larger price of the factory can be equipped with a few CNC machine tools. And if the computer can be reduced to this price, basically every research institute can be equipped, then it can also greatly increase the research speed of the research institute, after all, the calculation (this chapter is not finished!) )

Chapter 350: The Forgotten Project

Count the time it takes.

At this time, the team leader asked, "Then what are you going to do with Da Mao this time?" I'll hear it. ”

Li Zhao smiled: "It's just that this time don't be too ruthless, and then leave them another thought." ”

Chapter 350: The Forgotten Project