Li Zhao was shocked by electronics, the research institute allocated this time is far more powerful than Li Zhao imagined, and now with the information provided by Li Zhao, the future development of this research institute may not be underestimated. This is also to blame Li Zhao, there is not much for this research institute at all, so the current situation happened.

Li Zhao saw that the test effect was good, so he asked: "How much does this TV cost?" If the cost is not high, it can be produced, if it is too high, at most it can only be used as a technical reserve. The consumption capacity of our country is not high, and there are really not many people who can consume TVs, and there is definitely no market if it is too expensive. ”

After listening to Li Zhao's words, the researcher's eyes flickered a little, and Li Zhao understood what the situation was now, and sure enough, he finally heard the researcher say: "This production is made by several of our research institutes, and the cost is estimated to be more than three thousand, but if it is mass-produced, we should be able to reduce the cost to more than three hundred." ”

Li Zhao was also quite moved when he heard this price, if the price of the TV can really be reduced to such a low level, then there will really be a large market. Then Li Zhao took a look at other aspects of research, which are all relatively practical things, including radar, which are all being transistorized, Li Zhao has a full understanding of this research institute, and the strength is really not ordinarily strong, and the level of everyone is also quite high.

After reading it, Li Zhao asked: "There are a lot of achievements on the side of the inorganic institute, and the more useful one is the FRP material, which they have researched more advanced, and it is estimated that it can also be put into production." The others are relatively basic research, such as the extraction of various elements, crystals and so on. As for the mechanical institute, they are more likely to collide with your research, for example, they used to study machine tools, vehicles, etc., and they were all cut. ”

Hearing this, Li Zhao was also quite helpless, it was really that the things he took out were too advanced, and the blow to the mechanical research institute was too great. After listening to this, Li Zhao also understood the specific situation of the institute, and after reading this, Li Zhao went to Father Su and Master Zhang again, and now he must discuss the future development.

After meeting, Li Zhao asked, "Dad, do you know everything that several research institutes are studying now?" ”

Seeing Li Zhao asking this, Father Su said with a smile: "Of course I understand, was it shocked?" ”

Li Zhaole said hehehe: "Of course, I didn't expect them to be so strong, I thought they were just ordinary researchers, but I didn't expect so many research results to be brought over." I just watched their TVs and radios, and I feel like they can be mass-produced, but I don't know if the cost can be controlled. ”

When Father Su heard this, he was also shocked and asked; "Did they solve the interference problem? Why is it so fast, when I asked them two days ago, they all said that they were still thinking about a solution, how could they solve it now. Let's talk as we go, let's take a look together, if this problem is solved, it can really be produced. ”

Li Zhao also told him about providing an outdoor antenna at this time, and Father Su knew what was going on. Li Zhao also greeted Master Zhang at this time, and left with Father Su. When the two arrived at the workshop, the TV was playing the program of the Beijing Channel, and it was a cross talk, and several researchers were laughing when they watched it. Father Su looked at the situation and asked, "Do you think we need to build an electrical factory?" ”

This matter is exactly what Li Zhao is going to discuss with Su's father, and Li Zhao also said his thoughts: "I think it should be built, but it is best to distinguish it from the rolling mill when it is built, we mainly do electronic things, and hand over the electrical things to the rolling mill, so as to avoid the competition between our two factories." ”

When Father Su saw Li Zhao say this, he also said, "You talk about it in detail and see what we should do." ”

Li Zhao also continued: "It is products like TVs and radios, as well as computers that we will definitely produce in the future, and we will develop this product." And to give electric fans and the like to rolling mills, this kind of things, we can only do the production and research of motors. ”

As soon as Li Zhao said this, Su's father understood that the material factory would mainly develop industries with relatively high scientific and technological content in the future, and hand over the relatively low scientific and technological content to the rolling mill. Su's father said: "With such a development, will the rolling mill have an opinion?" In this case, their future development will be far from ours. ”

Li Zhao said: "This is also a matter of no way, all our factories are quite backward in terms of electronics and electrical appliances, and until now the rolling mill has not had the ability to produce qualified motors for electrical appliances, what if they are not handed over?" ”

Father Su was also quite puzzled at this time and asked; "Then why don't you let us produce the entire electrical appliance?"

Li Zhao saw Father Su asking this, and replied: "This is also something that can't be helped, this is determined by the nature of our factory, and it is better for us not to engage in these export things for the time being." Li Zhao still hopes that the material factory will be low-key for the time being.

Father Su also knew Li Zhao's intention to make such an arrangement, and the various projects that the material factory was going to carry out were all relatively sensitive content, so it was better not to put the material factory in the public eye, especially when it came to exports. Although Su's father also wanted to have more projects, he finally agreed, and said: "Okay, for electrical appliances, we will only develop motors, and as for the assembly of the whole machine, we will hand it over to the rolling mill." ”

Li Zhao saw that Father Su was a little unwilling, and also said: "Actually, this is better, we have already grasped the core things in our hands, we can't develop everything, right?" Where's this busy? ”

Su's father also said at this time: "This is not because these projects are the easiest to achieve, as far as fans and the like are concerned, our trial production has completely met the conditions for production, which is directly giving away a large amount of income." Forget it, it's good to be able to grasp the production of the motor now, and you were ready to let it go. ”

Li Zhao smiled and didn't answer, this is a fact, the main reason is that the rolling mill is too stretched, and it can't even build a better motor. The material factory is not, with the blessing of the research institute, there is really no problem with the general motor. Li Zhao didn't plan to dwell on this issue anymore, and then asked, "When will we get the machine tools?" I don't think the progress of the institute on computers is slow. ”

Su's father said at this time: "According to our queuing situation, we will need to get a set in the middle of next month at the earliest, and the rolling mill will be later, it is estimated that it will be in July." Now the production speed of the military factory is very slow, although a few have been assembled, but basically an average of two to three days to produce one, it is basically impossible to quickly expand the scale, we will get the second set, this is a special approval from the superiors. Li Zhao is also clear, it is really this set of equipment for the production process requirements are too high, can take out one in two to three days, it is very fast, after all, this is still the trial production stage, but there are not so many precision processing equipment. And the material factory can get the second set, which is really taken care of by the superiors, after all, many factories are lacking.

In the case of the helicopter discussed earlier, the main problem is also the issue of processing capacity. Li Zhao has now roughly read the drawings of the helicopter, thanks to the various materials put into production last year, to solve the problem of helicopter raw materials, this year to come up with qualified products, the current cause of the high cost, is the processing capacity.

According to the results of Li Zhao's research, if they have a complete set of new machine tools, then the cost will usher in a significant reduction. Let's just put it this way, a factory with a few thousand people, if it is produced according to the strictest production process, the helicopter plant may not be able to produce ten aircraft per year, how can this not be high?

Now it can be said that the vast majority of factories are processing capacity to limit the output, as long as the processing capacity keeps up, then the capacity, cost, quality will be greatly reduced, which can also be seen that the superior for the material factory value.

When Li Zhao heard this result, he said: "That's good, it is estimated that it will not delay our machine tool research." Next month, the equipment will be in hand, on the one hand, we will carry out the production of new machine tools, on the other hand, we will carry out the research of CNC machine tools, and strive to complete the goal of numerical control of ordinary machine tools within two to three months. ”

Li Zhao is not talking big, but Li Zhao has a complete CNC machine tool here. First of all, the information in Li Zhao's mind, which is equivalent to saying that there are from ordinary machine tools to five axes, and in the materials transported back by the material factory, there is a full set of information on CNC machine tools, and even in terms of procedures, there is a full set of information.

It's just that because the computer is too stretched, a CNC milling machine, just the computer occupies a few rooms, whether it is maintainability or performance, it can't make people satisfied. In addition, the cost of this equipment is too high, just the computer part needs hundreds of thousands, and no factory can afford to use it.

This also made this set of CNC machine tools not do much in the end, only a few were produced. The material factory now has this foundation, so the research is much faster, so to speak, now just wait for the computer, as long as the computer is qualified, then the CNC milling machine will not have any problems.

.

Ju Fanshi reminds you: remember to collect after reading