Li Zhao was able to come back so quickly, which still surprised Su Ya, because according to Li Zhao's convention, he would go to the workshop to have a look, and he actually came back so quickly today, obviously he didn't go to the workshop, otherwise he wouldn't have come back at all.

At this time, Su Ya asked, "Why did you come back so early today?" This is different from your usual situation, you didn't go to the workshop to see, and obviously you didn't go to the rolling mill, how did you change your temperament today?"

Hearing Su Ya's question, Li Zhao told him about the fact that the workers had returned to work and the things that Li Zhao proposed to reward. As for the rolling mill, Li Zhao also explained: "The rolling mill doesn't matter now, now the technical problems of the whole plant are directly related to the research institute, it doesn't matter if you don't go for three or two days, if there is something, they will notify me to go over and have a meeting to discuss it, and they can solve it by themselves if the problem is not big."

Li Zhao is not lazy, things are really like this, Li Zhao has now been notified, that is, the fifth to open the technical transformation project seminar, if the internal pass, then you can submit an application for technical transformation to the superior, and wait until the superior approves, the funds in place can start to rebuild, of course, if the internal discussion, found that there is a problem with the plan, it will be called back to continue to modify, of course, it will definitely put forward amendments.

Now with the participation of the research institute, the technical strength of the factory has directly risen several levels, just to say a simple data, the original technical personnel of the rolling mill, there are only a few personnel with a bachelor's degree or above, basically engaged in steelmaking. The others are basically technical secondary school or high school students, they are all learning with the technical personnel in the factory, the amount of knowledge reserve is seriously insufficient, in the development, the rolling mill technology is relatively lacking.

But now it's a big difference, after the corresponding team is formed, although they have other jobs, even if they go to the factory every day, they can easily solve some problems. The personnel with a bachelor's degree or above are directly more than ten times that of the rolling mill, which is the strength and is very beneficial to the rolling mill.

Now in terms of technology, there is basically no need for Li Zhao to worry too much, but there may still be some deficiencies in innovation, such as if the blast furnace of 5,000 square meters is still presiding, it is estimated that Li Zhao will preside over it, otherwise no one will dare to take it.

After chatting for a while, seeing that the time was almost five o'clock, everyone retreated, and they were embarrassed to always eat at Li Zhao's house, and after eating for a while, they would come over to chat with Su Ya. It's just that there is one person with thicker skin, and that is Nastya, she is directly dependent on Li Zhao, and she has no intention of leaving.

Li Zhao looked at Nastya who was playing tricks, and it was not good to drive her back directly, so he asked her and Su Ya to cook. And Li Zhao was watching them busy there, thinking about his thoughts, he needed to think about what he had to do in the near future.

Soon the time came to the fifth, also Friday, after these days, the material factory has been back on track, and the incentive plan has been discussed, issued, all the rewards will be cashed out when the salary is paid. For this reward, all the workers in the factory who stick to their posts are very excited, and the factory has given too much.

Since most of the workers in the factory are demobilized soldiers, their wages are generally relatively high, that is, the general operators have more than 40 wages, and this time they are given more than 10 days of wages at one time, which is equivalent to a worker can directly get more than 20 yuan of wages, and this subsidy is already high. ….

However, the advantage of this is also obvious, that is, the enthusiasm of the workers is fully mobilized, although the enthusiasm of the workers in the materials factory has always been quite high, but now it is more obvious. Let's talk about a small detail, that is, in the past, if it was almost time to get off work, for example, only one or twenty minutes away from work, if the production was just changed at this time, it would basically stop directly, and then clean up and wait for the end of work.

Now it will prepare the materials directly, and then take another ten minutes to clean after the shift. This is equivalent to more than ten minutes of work for employees, but this can ensure that the equipment running time can be increased by dozens of minutes every day. Don't underestimate these dozens of minutes, put it in the whole year, that is, directly increase the output of a few points, and calculate that there are tens of thousands of tons, or even hundreds of thousands of tons, although the increase is not too much, but it may be enough for the use of several factories.

And if it is not good for employees, then employees also have ways to pit factories, such as the products of some factories

For example, three points of error are usually allowed, so the weight is exactly three points and three points of negative error, which will lead to three points of higher profits or three points of lower profits.

There are also some jobs that are machining parts, such as allowing an error of plus or minus two microns, workers can directly produce a batch of positive and negative two micron errors for you, and then produce a batch of negative two microns for you, then the actual error of your product will be four microns apart, and it may be this error that will make you lose a customer directly.

If there is a defective rate, a slightly larger range will be given, such as one percent, then I will make a defective product for one hundred and make a defective product for five hundred or a thousand, and there will be a big difference. Of course, workers in this era don't have so many eyes, but if there are really workers who will do this in the future, it depends on the attitude of the boss.

Today, Li Zhao came to the rolling mill, first went to the construction site to see the progress and quality of the project, Li Zhao also did not find any problems, and then returned to the conference room of the production department after a look in each workshop, ready to have a meeting. When Li Zhao came, the technical staff and the person in charge of the relevant team of the institute had already arrived, and soon the time was nine o'clock, Director Yang and Deputy Director An came together, and after they sat down, the meeting began.

At this time, the deputy director of the factory first spoke: "Now the design of the 100-ton top-bottom double blowing converter has been completed, and you have also read the design plan, if you still find any problems, if there is any, put it forward as soon as possible, if there is no project for us, we will prepare to submit it in these two days, and after the approval of the superiors, we will be ready to implement." This project is very important, and we want to make sure that nothing goes wrong, and this will also be a supporting steelmaking converter for the 3,000-square-meter blast furnace."

Li Zhao has repeatedly reviewed this project, and it can be said that it has reached the pinnacle that can be achieved in China in this era, and it is clearly a technology that is at the forefront of the world. This question directly silenced all the technicians, they have also seen the design of this top-down reblowing converter, but they obviously can't say anything, this design plan in their opinion, has become a standard teaching material. ….

Seeing that no one said anything, Deputy Director An said to Director Yang, "Factory Director, this plan should have reached a relatively good level by now, so let's decide and report it first, right?" We should start construction as soon as possible, and then complete the test in the first half of next year, and complete the construction of the supporting converter before the blast furnace is put into operation, what do you think?"

When Director Yang heard Deputy Director An say this, he also said: "Yes, this is completed by you and Chief Engineer Li, and it should be the best plan in the country, just report it according to this, you can improve the construction plan first, and consider all the problems that may arise in the middle, so as not to make any mistakes."

The next time is to discuss the plan of the technical transformation project in the factory, these plans are compared with the new blast furnace construction plan, you must know that when Li Zhao designed the 3,000 square blast furnace, many of them are referring to the blast furnace after 60 years, it can be said that in many aspects are relatively advanced, so it is absolutely very appropriate to transform the new blast furnace.

For example, the factory is a small blast furnace, how to design the conveyor belt to achieve raw material transportation, after all, the previous transportation mode is too backward. At present, there are two plans, one is separate construction, and the other is unified construction. If they are built separately, each can operate independently, but if they are built together, then they need to be divided into a transfer center. And then transported to the corresponding blast furnace, both schemes are relatively reasonable, it can be said that they can be used.

Finally, this question came to Li Zhao's hands, Li Zhao thought for a while and said: "These are small blast furnaces, according to our development, I hope to dismantle these blast furnaces in five to ten years, and in the future, large blast furnaces are the real development direction, so my opinion is which one is faster and more cost-effective to build."

After listening to Li Zhao's words, everyone suddenly realized, and Director Yang spoke directly: "What Chief Engineer Li said makes sense, after our 3,000-square-meter blast furnace is put into operation next year, if it goes smoothly and meets the design requirements, then we will continue to invest in the construction of larger blast furnaces, so the elimination of these small blast furnaces has become inevitable." I've heard you say that building separately will be faster and more cost-effective, so let's build it separately, and when the time comes

When you dismantle it, you just split it separately."

So far, all the plans have been discussed, with the final decision of Director Yang, all the technical transformation projects have been determined, and soon all the plans have been taken out and handed over to Director Yang, who will hand them over to the higher authorities for review, and if the audit is passed, the construction will begin. Li Zhao didn't think that his superiors would get stuck, after all, these plans were all about enhancing the steel production capacity of the rolling mill.

Ju Fanshi reminds you: Remember to collect after reading [] w w w.. com, next time I update you to continue reading, look forward to the wonderful continue! You can also use the mobile version: wap... com, you can read it anytime, anywhere....