Seeing off Master Zhang, Li Zhao thought for a long time, but still picked up some drawings and prepared to go to the Electronics Research Institute. Originally, Li Zhao was ready to go slowly, there are too many projects recently, although the factory wants a lot of management personnel from the superiors, but the overall management is still a little difficult, after all, this era is not as convenient as the future.

In many cases, if you want to know the situation of each part, you need to go to the scene to see it in person, and it is also inconvenient to pass the message, and the most way to transmit documents is to run back and forth on a bicycle, and it is impossible to take a car. After all, there are too few cars, just like the original rolling mill, it is not easy for the deputy director to sit in the car. That is, the factory is backed by a division, so that it can be slightly richer in the vehicle, and the deputy director of the factory can use the car at any time.

In this case, it is very difficult to improve the management efficiency, and in the future, the documents will be swept directly between the two parts, and then they will be transmitted, and now it is necessary to run by bicycle for dozens of minutes or even hours. Under such circumstances, Li Zhao really didn't want to open more projects, especially since the rolling mills had just been merged.

It's just that now Master Zhang is really in a hurry, so he can only ask the institute to pre-study it first to see what aspects need to be broken through, and then find the responsible personnel first, and when needed, they can be transferred out at any time. Li Zhao's drawings are not detailed, mainly control, communication, surveillance, etc., as well as the overall design of the drone, of course, the drawings mainly put forward the weight and size requirements.

If the weight and size are not controlled, the impact on the performance of the product will be great, and the increase in weight is equivalent to the increase in the load, so the corresponding wingspan area will be needed to offset it, which will increase the size of the UAV, and the cost will rise accordingly. Of course, Li Zhao can't ask for it as much as sixty years later, after all, technology can't reach it.

It's just that drones are a big product category in the future, and the factory must take the lead. As long as you take the lead and then develop well, it will be easy to feed tens of thousands of people with this project in the future, after all, the future UAV market is very vast, and these are what Li Zhao is best at.

Soon came to the Institute of Electronics, Li Zhao found the person in charge of the institute, told the other party about the drone, and finally showed the drawings he brought to the other party, and said: "These are probably the things that need to be studied, but the most important thing is the problem of chips. ”

At this time, the person in charge said: "Chief Engineer Li, don't worry, we now know where to work hard, and we must definitely be much faster than others." In my estimation, by the end of the year, we should be able to integrate 1,000 transistors on the chip. ”

When Li Zhao heard this, he couldn't help but raise his eyebrows, how could this progress be so fast? Li Zhao felt unbelievable and shocked at the news, and asked, "Why did you make such rapid progress, didn't you just realize the integration of multiple transistors on a single silicon wafer?" How come it will be a thousand at once. "....It is true that Li Zhao has been completely shocked, this speed of progress is too abnormal, Moore's Law says that the number of components on integrated circuits will double in eighteen to twenty-four months, but you have only been a few months later, and it has directly doubled a hundred times, what is the trouble? This is directly challenging the objective law, a bit too mysterious.

Hearing Li Zhao's words, the person in charge of the research institute said: "Chief Engineer Li, we can be so fast because of the information you gave, and the next research will not be so fast, and the rest of the things will be improved in terms of foundation, and the progress will be much slower, and it will be faster this year, but this can already be practical." ”

Li Zhao also feels incredible, but think about it, although he doesn't know much, most of them are popular science knowledge seen on the Internet, but these are the right way forward after all, and they are still very instructive for the current research institute, but now it can reach the integration of a thousand transistors, so it will not take two years, then it will basically be possible to achieve real-time video monitoring.

Then Li Zhao told the person in charge about the exchange, remote communication and other aspects, and listened to him say: "The exchange should not be difficult, with this we can directly have a practical product, in this way, although we may not be able to create much value, but it is not always spending money." ”

When Li Zhao saw him say this, he also said: "You have also started to make money now, haven't you already sold a few computers?" And our own machining workshop is also continuing to install CNC machine tools, although the income is far from spending, but it can be regarded as seeing the return of money, after all, research costs, that must be invested. ”

Now the most expensive laboratory in the factory is undoubtedly the content related to the Institute of Electronics, not to mention the supporting factories, for electronic research, the factory is directly invested in a complete set of supporting factories, and now they have begun to put into production. Let's talk about a silicon rod, it is not a simple casting, it needs to let the silicon grow along a specific lattice structure, and finally form a monocrystalline silicon rod, not just any kind of silicon can be.

As mentioned earlier, copper is not expensive, but if you want to produce monocrystalline copper, the price will increase by tens or hundreds of times, because the energy consumption in production will be very high, and the production capacity is very low. Just like monocrystalline silicon, in the monocrystalline silicon growth furnace, the crystallization speed of monocrystalline silicon is only twenty or thirty centimeters per hour. This is also the reason why the future silicon rod manufacturing wants to make it as coarser as possible, after all, the growth rate is so fast.

At this time, the person in charge of the research institute said: "Chief Engineer Li, that's what you will say, how have we been able to study in the past with as much money as now?" It's often about researching a technology, first trying to find a way to raise funds, and then looking for raw materials everywhere, and the time spent on research is not as much as the time spent raising funds, and now at this speed, we already feel very slow, mainly because we don't have enough manpower, otherwise we can be faster. ”

Li Zhao also sighed after hearing this, he wanted to ask for more people, it was no longer possible, where were there so many researchers for them, just now these thousands of people were transferred in after many requests from them, how could it be so easy to ask for more people. Thinking of this, Li Zhao said: "It's basically impossible to want people, but you can let your subordinates take a look at the workshop and school, and whether you can find some people who can help." At this time, the person in charge said: "We are also paying attention to these, wanting to see if there are more genius people, even if there is no way to provide any help in research, it can also let some of our researchers get rid of the complicated experiments, let them be responsible for the direction and theory, and the assistant will carry out the relevant operations." This will allow us to expand our limited manpower to a large extent, but it will also take time. ”

Li Zhao nodded, thinking to himself, this is the only way, but he can talk to Father Su to see if he can set up a technical secondary school to recruit some people for targeted training and be assistants or operators in the laboratory.

Thinking of this, Li Zhao wrote down this idea, and then said: "I'll see if I can set up another technical secondary school or something next year, and try to recruit some students for targeted training at that time, and give you a hand, but you have to think about the training methods of these people, and it is estimated that you will still have to teach at that time." ”

Hearing this, the person in charge said with a smile: "No problem, this is the fastest way to increase our manpower, if there are good seedlings, we are not unable to continue to cultivate, after all, no one is born to know, we are also learning little by little, here they learn while working, although the breadth of knowledge may be lacking, but the professionalism is estimated to be okay." ”

Think about it, it's really okay, in the next few decades, the electronics research institute is only the chip-related parts, which is enough for these people to study for a lifetime, just like the size of the wafer, if you want to reach more than ten inches, I don't know how long it will take.

Thinking of this, Li Zhao continued: "Now it can only be like this, the next main shortcoming is still in the computer, I am now already drawing five-axis four-linkage and five-linkage machine tools." I shouldn't have any problems with these machinery, the main problem is still in the computer and system, the five-axis linkage machine tool, can process complex surfaces, you also know, not only in hardware, but also in software. ”

When machining complex surfaces, many times it is directly drawn on the software, or the design drawings of the parts are poured directly into the software, and then the software directly generates the processing paths.

However, for the application of five-axis machine tools, Li Zhao is not in a hurry for the time being, and there is a long time left for them, after all, this project is very difficult. And in the early days, it is not necessary to go directly to the highest difficulty all at once, you can slowly explore, anyway, next year, basically the five-axis machine tool can definitely be taken out to process some relatively simple parts, and then every year is to continue to study and then more complex parts processing to overcome.

。.

Ju Fanshi reminds you: remember to collect after reading

new